 | | Re: Brainstorms
|
|
(...) I thought Philips kept a master registry of all the hardwired I2C addresses allocated to each chip vendor? That should mean that just reading the hardwired address is enough to tell you what *kind* of device you've found. ---...--- Steve Baker (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) I have read this dicsussion, and have been most interested. From what I can understand (I have no current desire to read the I2C spec) the random ID number will identify that device on the bus once it is detected (or the permenant number, (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) There are many more options available than the three you list above. Note that there are far more microcontrollers in small packages with UART's than there are ones that have built in I2C. The UART only ones cost way less too. Many of the (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) [snip hot pluggable] (...) That is only a partial bus scan. It does not tell you what is at each address. A full bus scan allows people to plug arbitrary devices into the bus and allows the bus master to to reliably figure out what has been (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) I will contrast the decisions made by the Cricket team with the decisions made by the RoboBrick team. For reference purposes the RoboBrick home page is at: (URL) reasons for avoid centralized solution] (...) The RoboBrick team also asked (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
Hi, (...) Weird idea ... (...) It's way simpler: You just send the address and wait for the acknowledged via the data line. Then you just don't continue ... you don't even need read access to the clock line for this. IMHO something that can carry (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Problem of comm. btw. PC & RCX in lejos2.0!?
|
|
Hi, all! | |Under the instream directory (of lejos 2.0 package), I'd like to |download Read.java to RCX to |read the value sent from PC with Write.java running on it in order to |write a number to RCX. However, when I tried to execute the |bytecode (...) (24 years ago, 13-Aug-02, to lugnet.robotics.rcx.robolab)
|
| |
 | | Re: Brainstorms
|
|
(...) Since I had to support hot-pluggable devices on the bus (not my idea), I had to continually scan the bus. Unfortunately, that was several years ago and I don't remember all of the details. It took either a zero-length read or a zero-length (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
<snipped Fred's excellent Cricket description> (...) Again, I need to go back to my real-world fire alarm experience and say that this makes very good sense. Nobody gives much thought to the alarm systems in their building. They must meet very tough (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | josx.rcxcomm.SocketProxy
|
|
Hi there, I'm using OSX with lejos and have got it working fine, but am wanting to get using the "rcxcomm" part, i can compile the examples, but can't start up the SocketProxy, does anyone know how to do this in OSX/linux? they say you have to: "Add (...) (24 years ago, 13-Aug-02, to lugnet.robotics.rcx)
|
| |
 | | Re: Brainstorms
|
|
(...) Yep - we agree on that goal. (...) I agree that this is a nice goal - but it conflicts with another goal I have - which is to keep the physical dimensions of these devices *tiny*. Lego is a very small scale to build on compared to most robotic (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | re: Brainstorms
|
|
Thanks Stef Mientki for pointing me to this great thread you guys have going. People may wish to take a look at the Cricket work I've been doing the last five years. The Cricket system a modular brain & sensors & actuators construction kit along the (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
Matt Lawrence wrote: > I think the addressing problem can be solved with random numbers and some > serious bus scanning. Failing that, burning a serial number into each > chip isn't that hard either. It would still require quite a bit of bus > (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Scout and USB Tower
|
|
With NQC, I can download programs just fine to my RCX from my iMac using the USB IR Tower. When I try to download programs to my Scout however, it fails, acting like the Scout isn't even there. I can send messages and remote commands to the Scout (...) (24 years ago, 12-Aug-02, to lugnet.robotics.scout)
|
| |
 | | Re: Brainstorms
|
|
(...) [snip Philips uC] (...) The I2C bus is not really designed to support a bus scan. I'm not saying it can't be done, but I certainly haven't figured out how to do it. Until I see somebody who gives an extremely detailed description of how they (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms GUID
|
|
(...) That's what we thought as well. (...) If you use a pseudo random number generator with the same seed you will get the same `random' number. The obvious answer is don't do that. I personally use the /dev/random device on Linux which collects (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms GUID
|
|
(...) Presuming they can use different seeds, 32 bits is one chance of collision every 4,294,967,296 attempts. If they don't have random seeds then it doesn't matter a damn how many bits you have. The chances of collision on each reboot go up (...) (24 years ago, 13-Aug-02, to lugnet.robotics)
|
| |
 | | What is Spybotics?
|
|
All the information I have seen on it make it seem very vague. Is it like a robotwars game or something? I just can't figure it out. I saw all 4 (1 each) at the local Target and they look very neat, but I know nothing about them other than the info (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms GUID
|
|
(...) Maybe I completely missed the point myself? I like your idea of intelligence so small it can fit into a brick, and then tie into upper levels of higher intelligence. That sounds like true distributed processing (a good thing) to me. Here's the (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: About lejos 2.0!
|
|
(...) It should be fine (I think). (24 years ago, 12-Aug-02, to lugnet.robotics.rcx.robolab)
|
| |
 | | Re: LEGO Purism
|
|
(...) I'm sure I can find the BrickOS (LegOS) code. Give me a day. As I recall, the biggest problem I had was ignoring the drop caused when the robot would start moving. Steve (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
hi Fred, I would love to see a reaction from you on the discussion in this thread in lugnet.robotics. Not only because you're the inventor of the RCX but also you've done some some similar things, creating modular, stackable electronics with the aim (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: About lejos 2.0!
|
|
Hi Paul! Thanks for your reply first! I want to ask more is will it have a conflict with lejos 2.0 if I've installed Java Comm. API on my linux box? Laurence (...) (24 years ago, 12-Aug-02, to lugnet.robotics.rcx.robolab)
|
| |
 | | Re: Brainstorms
|
|
(...) I did a project with the Philips chips several years ago. I2C worked very well, the smallest chip I used was a 87C751. A little bit bigger than an 8-pin chip, but available in surface mount packages. Also, a friend of mine used a 751 as an I2C (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms GUID
|
|
All: I'm not sure I really understand what point is trying to be made. I thought that a globably unique id was a good idea and put them into RoboBricks. My choice was to use a 128-bit random number. There are other solutions. All of the other (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms GUID
|
|
(...) > somewhere must administer who gets what ID numbers. (...) The trouble with all these fancy approaches is that they all require additional logic. It might not seem like *much* additional logic - but if the goal is to fit most kinds of (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) They may have had them, but they didn't show up in any of the catalogs I was looking at. Semiconductor companies are quite notorious for deciding to stop production on various chips. Lot's of people tried to standardize on the Motorola HC11 (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms GUID
|
|
Quoting "Russell C. Brown [RR-1]" <rcbrown@austin.rr.com>: (...) Well, one easy answer is to use a Dallas serial number chip. They are way less than a dollar in quantity. Actually each 1Wire device has a guaranteed unique ID. Some have EE memory for (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: About lejos 2.0!
|
|
(...) No. (24 years ago, 12-Aug-02, to lugnet.robotics.rcx.robolab)
|
| |
 | | RE: Brainstorms
|
|
This may be totally off-base--I'm not as techy as you guys--but the software biz has the idea of a universally unique ID (UUID, a.k.a. GUID for globally unique ID). It's a way of generating a unique number without any centralized management. Windows (...) (24 years ago, 12-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
Steve, Thanks for the quick feed back : ) Please take a look below ... & LMKWYT. -JSM Steve Baker <lego-robotics@crynwr.com> wrote in message news:3D56C75C.403000...ail.net... (...) I was thinking that it could be used to hook up to joysticks, (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) What you want... surely must depend on what you can reasonably expect to get. I have no expectation that LEGO will come up with a major revision that has the breadth and depth of the wonderful suggestions in the responses to John's post. (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) Are you sure? I thought Philips had teeny-tiny microprocessors with I2C at least 10 years ago...before the I2C bus switched speeds from 100kbps to 400kbps. I2C is about 20 years old. (...) Address pins? What address pins? ---...--- Steve Baker (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) The RoboBricks project was started 2-1/2 years ago. At that time, there were no readily available and 8-pin microcontrollers with built in I2C support. The Atmel tinyAVR series had some I2C support, but the chips were extremely difficult to (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) So I imagine the need for a brainstorm brick that has a standard Lego wire connection on the top and a little I2C chip inside that would interface with existing motors and sensors. This would certainly be needed because nobody wants to butcher (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
OK, I've been watching this thread for a few days (I am LUCNY's "Expert Lurker" after all !) and refining some ideas that I've had for a while in hopes that I can contibute to this dicussion in a useful way. Please keep in mind that I'm a Mechanical (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | About lejos 2.0!
|
|
Hi! Does lejos 2.0 need Java Comm. API? Laurence (24 years ago, 11-Aug-02, to lugnet.robotics.rcx.robolab)
|
| |
 | | Re: Brainstorms
|
|
(...) <snipped some reasonable arguments> This is why I recommend that 'brainstorms' goes with something like I2C. That protocol is fast and built into the chip. No software serial I/O is ever needed and every chip already speaks the protocol so (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
Steve: Everything is a compromise. Here is a discussion of the issues that caused us to pick 2400 baud for RoboBricks: 1) Most of the various PIC's that we use (PIC12C509A, PIC12C672, PIC16C505) run at 4MHz. The 4MHz clock rate is divided by 4 to (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Spybotics vs Cricket
|
|
Paul Andrews writes: > In lugnet.robotics, Russell Nelson <nelson@crynwr.com> writes: > *Mad* props to anybody who > >makes a loop network (ala the Clarkson Loop from my Master's thesis) > >out of three or more spybots. > > Err. What's a Clarkson (...) (24 years ago, 11-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Programming multiple controllers
|
|
(...) OK, I'll bite, how does the Spybot get into this state? We've already discussed how to set up a secure link - how do we set up a non-secure link? Cheers, Ralph (24 years ago, 10-Aug-02, to lugnet.robotics.spybotics)
|
| |
 | | Re: Programming multiple controllers
|
|
(...) got (...) configuration? Bot one must be on Accept commands from ALL channels Mode. Dean (24 years ago, 10-Aug-02, to lugnet.robotics.spybotics)
|
| |
 | | Win98 install help
|
|
Hi there. Please can someone help me. I've been following the instructions at: (URL) word for word and then I got to the bit where it says: "Last setup I've tried let you choose which modules you need to download and setup. Here is a minimal list (...) (24 years ago, 10-Aug-02, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: measuring motor voltage on sensor input
|
|
Quoting Paul Andrews <paul@jools.net>: (...) How about a simple resistive divider across the motor output, say two 1 Kohm resistors, with the motor on the top of the two and the sensor input on the midpoint, so it sees the battery divided by two? (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
(...) <just an opinion> The 2400 baud rate was probably chosen as a compromise between speed and what could reasonably be done on the teeny leetle PIC processor that drive the bricks. In practice, with the dedicated protocol that Wayne describes, (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) the interconnect protocol is run so slowly. Why only 2400 baud? Anything where you have an actual copper wire connection could run orders of magnitude faster. Heck even iRDA goes faster over infraRed. ---...--- Steve Baker ---...--- Mail : (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
Wayne, In the spec you indicate that each brick gets its own 128 bit random number. This is like a serial number that is initially use to uniquely identify each brick with a shorter BrickID. This is a common technique in fire alarm systems where (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
Wayne wrote (in his first post no less!) (...) <snip> (...) <snip> This is more like it. I've snipped out the juicy bits on the serial comms channel and modular power connector. The comms channel sounds a bit slow, but then again the fire alarm (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
All: I think the project that I am working, called RoboBricks, on is quite relevant to this topic. Since this is my first post to this group, I should introduce myself as a very active member of the Home Brew Robitics Club based out of San Jose, (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
There are good, rational reasons for most of these decisions: (...) That makes good sense - because once a piece has been modified, you can't use it for it's intended purpose again. (...) That also makes sense - because it's purely decorative - and (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) That's nice... what is the underlying issue? Is it not being true to Lego form? I think the overall concept of being Lego Purity is a personal decision. What levels you are willing to go may be different to what the guy down the road, etc. If (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) I don't suppose you have some code for this do you? I tried this some while back with no success :-(. I found that the battery voltage seemed to fluctuate too much for me to be able to detect a stall condition with any degree of certainty. (...) (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) A little experimentation shows that you are right :-) or should that be :-( (24 years ago, 10-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms (battery options)
|
|
(...) I like the 9.6V NiMH R/C model battery packs, that's what we use in my university class. It's easy to parallel them or have separate packs for brain, motor and servos. Should we stick with that and add an on-board charger? Or keep the charger (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms - multiple I/O buses
|
|
(...) Exactly our approach. JStik on a JCX system will have ethernet, high speed I/O bus (bytewide data, addresses and strobes). SPI and I2C are supported, also Dallas 1Wire with a JSimm board plug in. Oh, IrDA and RS485 will be options too. When? (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
(...) ......... SNIP (...) Why have just one BUS, different BUS's are optiomised for different purposes and it can be easy to support different types (Possibly by different midules). ie 1Wire, I2C, Ethernet Bruce Powell (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) Well, as a robot sumo fantic, I can tell you there are ways of getting around these limitations, so you CAN have multiple battery packs, and many, many motors. How about ten motors powered by 24 batteries in two RCXs and two battery boxes. (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) <snip> (...) buy in the store, much as it is now. Then, like servos or such, you can buy add-on's which would snap to the side of the RCX. These add on kits could be: motors plus snap-on expansion port to the RCX Sensors (any type) with, (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) Also, for the Robot Sumo fanatics, they could have multiple battery packs and many, many motors. If the batteries aren't modular - then they impose a limit on the amount of stuff you can have - so the power supply has to scale along with (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
Cheers John! Not really a high-end user, I'm fairly satisfied with the RCX brick with a few exceptions: First, it isn't really that robust. I've got 2 RCX bricks, and both get amnesia. Bending out the battery clips reduced the problem in one, but (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Spybotics spotted at Target
|
|
For those that may be waiting to buy Spybotics at your local store, I saw all 4 sets today at my local Target (Dayton, OH). Also, the local Meijer stores have the "Technic" RC Race Buggy 8475. Andy (24 years ago, 9-Aug-02, to lugnet.market.shopping, lugnet.robotics.spybotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) Neat! I guess the only drawback is that you don't know *which* motor stalled - but most applications can probably live with that. Anyway - you *CAN* do this with the RCX 2.0 firmware. In NQC, you can call x = Batterylevel () ; ...the result is (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) One way to do this, without adding any hardware is to check the internal battery voltage. I'm not sure if it's possible with the standard firmware v2.0 (it wasn't possible with 1.0/1.5) but you can do it with replacemet firmware, like BrickOS (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) Erh, I'm not so sure about that? One side of the sensor input is ground, the other side is the input to the voltage measurement circuitry. The motor output on the other hand has two connection, which are either ground and +8(ish) or +8 and (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) Yes. Guess I'm going to have to do it. The more I think about it. The more attractive the programming and mechanical issues become. Like: I have a two-motor setup. How do I monitor both or do I go for a synchro drive instead? Do I want to (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) First of all, to Gaff: I also think it is desirable to work within the LEGO system, and I don't consider my mind 'sick and twisted'. Well, maybe a *little* twisted! <grin> To Paul: Try running a wire from the RCX power output, to your motor, (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
(...) I consider myself a LEGO purist in the sense that I try as hard as I can to solve the problems with what LEGO provides. I simply can't take a GOOD LEGO piece and "brake" it of modify it on purpose. I will, on the other hand, try to use a (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) Despite my urge to make new and better(?) sensors, Lego makes a stall sensor! Stick a rotation sensor in the drive train and timeout a change in count value. (Same way as automated braking system do.) JB (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) I too like working within the existing constraints. It makes you creative. Still. I'd kill for a stall sensor. (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Spybotics vs Cricket
|
|
In lugnet.robotics, Russell Nelson <nelson@crynwr.com> writes: *Mad* props to anybody who (...) Err. What's a Clarkson Loop? (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | SocketProxy
|
|
Hi there, I'm using OSX with lejos and have got it working fine, but am wanting to get using the "rcxcomm" part, i can compile the examples, but can't start up the SocketProxy, does anyone know how to do this in OSX/linux? they say you have to: "Add (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
I'd like to see something inline with all the other comments that would be able to use standard IRDA from my laptop. And have pwm output for servos. Rob (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Spybotics vs Cricket
|
|
Please move me out from the mailing list. -----Original Message----- From: news-gateway@lugnet.com [mailto:news-gateway...net.com]On Behalf Of ken koleda Sent: Wednesday, August 07, 2002 9:56 PM To: lego-robotics@crynwr.com Subject: Re: Spybotics vs (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
and (...) Now that I think about it, in order to raise the signal to noise in the message queue, the sensors should have 3 modes: Listen to the message queue (default) Listen and notify on change Listen and notify on clock Okay that's all I can (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: "Lego Compatible" was Re: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
(...) No, you were being pedantic. A vice to which I've never fallen myself... :o) Elijah (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) I'm fairly new to the subject, and have not yet came to a point where this was an issue. But, if I ever do, I can see nothing wrong with using non-Lego pieces in my creations. The thing is, my interest is in robotics, not Lego robotics. Lego (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: "Lego Compatible"
|
|
(...) Right, it needs to work with standard Lego sensors (of whatever kind). So by my definition then the Scout is only partially compatible. Bruce (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: "Lego Compatible" was Re: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
(...) No - you said it has to work with the active sensors and the Scout only works with passive sensors. I was just being facetious - it's been a long hard day today. ---...--- Steve Baker ---...--- Mail : <sjbaker1@airmail.net> WorkMail: (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | "Lego Compatible" was Re: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
(...) If a 'computer' accepts the unmodified plug-on Lego sensors and motors then (by my definition) it's Lego-compatible. Bruce (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
Although I prefer lego parts, if they decide to discontinue such a great product I will not think twice in buying 3rd party mindstorms CPUs for my creations. As long as it fits what I've got. A robotisist's gotta do what a robotisist's gotta do (say (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: LEGO Purism
|
|
Here here! Another great thing about LEGO is the engineering of the pieces allow one to test possible designs for other types of robots. In my case, I don't have the resources to spend $$$ on machining metal only to find out my first 3 ideas didn't (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
My suggestion, for your wants/needs would be to use a PDA with Linux (for the purist in you) rather than an RCX. Refurbished and/or discontinued ones are starting to show up for $250 or less. They are about the size of an RCX, too. Another option (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) I don't have any quarrel with setting limits for the scope of some hobby. When I was a kid I made a whole raft of 'useful' household articles from nothing but glue, popsicle sticks and dried pasta in various shapes. Most were spray painted (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
(...) So a Scout isn't a Lego compatible computer? ---...--- Steve Baker ---...--- Mail : <sjbaker1@airmail.net> WorkMail: <sjbaker@link.com> URLs : (8 URLs) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Mindstorms Bleak Future - Bah! Purism Shmurism!
|
|
(...) (I made this up) - a computer which accepts Lego I/O devices (sensors and motors). This includes both passive and active sensors. (...) More like this: keep the mechanics of the house you have and we'll add new network wiring and a smart home (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) Ooh - I'd forgotten the Dallas Semiconducter 1-wire interface - that would work out really well. Do Dallas still make a bunch of interesting devices for that standard? (...) I2C has ROM and RAM devices that plug right into the I2C bus. I think (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) It doesn't need a voice synthesizer - it DOES need the ability to ADD a voice synthesiser. It's a pretty pathetic CPU by modern standards...if all you are using it for is turning motors on and off and reading sensors - then it's fine - but (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
Elijah has IMHO a nice starting point for a series of modules for Robotics. My extensions, would be based upon a common addressing system ala Dalas Semi 1 wire. This allows for simple stacking of 1wire devices. Compiler/Interpreter keeping track of (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: LEGO Purism
|
|
(...) This one is interesting. By using the firmware in the brick in a new and interesting way, are we exploiting the power of LEGO? Or are we filing the studs off a 2x4 to make a tile brick? It all depends on your point of view. I see the RCX as a (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
I'd really love to have the time to do this right, with links to all the neat articles I have been finding for lunch time reading, and to be up todate on the technology involved. But I will be lucky if I can get this written befoe I am required to (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
(...) <SNIP> The more things change..... It's funny, but if you look back at the rec.toys.lego archives around 1998 you will find a thread that is very similar to this, and then LEGO brought out the RCX. Producing, selling, and supporting single (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
This purism thing (which I happen to agree with BTW) is a hard thing to pin down. I think of it like this. I like building things with Lego - I *know* that I could do things more easily by machining it from solid metal or casting something or (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
(...) It's more than that. Lego is all about having no arbitary limits on what you can build. If you have enough bricks, you can build arbitarily complex things. However, RCX is horribly limited - and it's limits are obvious and easily reached. (...) (24 years ago, 9-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Brainstorms
|
|
I don't know too much about electronics and micro-computing but here are my thoughts. For modularity I would use some kind of conector plate like the ones for old motors. This connectors would provide electricity and communication between bricks, (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | RE: Brainstorms
|
|
(...) <SNIP> (...) I favor a monolithic base with modular attributes. More specifically (in no particular order): a. 4 sensor ports b. 4 motor ports c. One RS232 serial expansion port (want more I/O? make a serial based expander) d. System com port (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | RE: LEGO Purism
|
|
This reminded of the scene in Apollo 13 where a guy at NASA dumps a bunch of stuff on a desk surrounded by people and tells them "make this fit into this" (he held up two different shape CO2 filters) using only what they had onboard the craft. (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | Brainstorms
|
|
Ok. I've seen a similar ebb and flow of ideas for modularization in this newsgroup before. The difference, is that now, most people who are reading this a probably well familiar with the RCX, Mindstorms, etc etc. The subject of this post is intended (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | Re: Spybotics vs Cricket
|
|
Has anyone seen the movie with Robin Williams where he is a jewish man in a naz* camp? There he has a radio and carries good news (he lies) to the people. Ok, I received a mail from a friend at the US Navy and it reads: "...This Tuesday I heard a (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
If you were a Lego purist, you'd be using the programming software which was supplied in the RIS kits. "The Gaff" <lego-robotics@crynwr.com> wrote in message news:OE50nHAaaz7EjQx...ail.com... (...) as (...) constraints (...) find (...) build (...) (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|
| |
 | | Re: LEGO Purism
|
|
(...) Because my chosen hobby is *LEGO* robotics, a distinct subset of robotics as a whole. I am fully aware of the advantages of "opening my mind" to using non-LEGO elements; I just don't want to. I understand that you feel differently, but that (...) (24 years ago, 8-Aug-02, to lugnet.robotics)
|