 | | Re: C++ OverHead
|
|
(...) Hi, unfortunately I am unable to answer your question, however I am very interested in what you are doing with GA. I recently recieved my RCX and have done GA work in the past as part of my schoolwork. I would love to try using some GAs with (...) (26 years ago, 24-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | MacNQC Beta
|
|
Hi all, I have been working on an updated version of MacNQC and am now ready for a public beta. If you are interested in it, it can be found at (URL). There are some new windows to control the RCX and the compiler has been updated to NQC 2.2r2. Rob (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.nqc)
|
| |
 | | Re: Parallel sensor problem
|
|
Bernardo Dal Seno <piu1759@cdc8g5.cdc.polimi.it> wrote in message news:87d7dd25ge.fsf@...o.bogus... (...) crane, and (...) RCX 2. (...) like: (...) Thanks. I'll try that. (...) happens (...) connected to (...) Nup. I disconnected the motor, but the (...) (26 years ago, 24-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Parallel sensor problem
|
|
(...) I don't know if this is your problem, but the input ports have polarity (one lead is connected to ground and the other to +5V through a resistor, if I remember correctly). Have you tried to change polarities? (...) Maybe the problem is not in (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) On the RCX the LNP handlers are called from an interrupt handler, so after the execution of lnp_*_set_handler() you can safely assume that the old handler will not be called any more. On a PC things are different, there is a problem. I didn't (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Rotational Sensor & Gearing Down
|
|
"Bob Fay" <rfay@we.mediaone.net> wrote in message news:G7MKLo.2tB@lugnet.com... (...) I'll back that! It's totally hit-and-miss. I've done several tests on different gearings (some running the thing off a micromotor...) and no matter what, they (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | RE: Mindstorms for Dummies (off topic)
|
|
Hi Jeffrey! On 22 Jan 2001, Jeffrey Hazen <jeffrey.hazen@northmill.net> wrote in <01C08491.E5EEA300@northmill1>: (...) Last dummy book I had in my hands (at the Frankfurt Book Trade Fair) was: "Sex for Dummies". I couldn't help but ask--I was at the (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: C++ OverHead
|
|
I seem to recall someone doing some testing that showed that C++ programs worked out to take out somewhere around 2 to 3 times the space of comparable C programs. However, I'm sure that varies. Luis (...) ---...--- "Nobody ever said that democracy (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Battery contacts losing their springiness
|
|
If pulling the spring back out does not do the job, try inserting a small piece of soft foam behind the spring contact. -- Bob Fay California, USA rfay@we.mediaone.net (URL) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Rotational Sensor & Gearing Down
|
|
Rotation sensors will lose counts randomly in spite of the firmware. -- Bob Fay California, USA rfay@we.mediaone.net (URL) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | leJOS presentation
|
|
Hello, I'm going to be speaking about leJOS at the O'Reilly Java conference: (URL) March 29 at the Westin Santa Clara. Unfortunately, you can't come see it for free, but I thought it was worth mentioning anyway. Even though the online description (...) (26 years ago, 23-Jan-01, to lugnet.robotics, lugnet.robotics.rcx.java)
|
| |
 | | Re: Rotational Sensor & Gearing Down
|
|
How fast is too fast? I'm using the firmware from version 1.0 (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Motor Speed value interpretation?
|
|
(...) As far as I can tell, the speed value really affects power output. This indirectly affects speed, but not in a very happy way. You end up with a wide range of values that give you nearly the same speed, then a very short range that decreases (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | C++ OverHead
|
|
Hi all, a simple question ( I hope) I'm running a small GA on my rcx block , and I'm fairly happy qwith my results so far, it evolves well tot he conditions, however I'd like to try something new <g>... I'm going to try to evolve sub-sumptive (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Battery contacts losing their springiness
|
|
My RCX's battery compartment's contacts have lost their springiness, such that if the RCX is jarred it loses power, and the cells will fall out if the RCX is held with the battery compartment down. I suspect a combination of causes: * Leaving the (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Rotational Sensor & Gearing Down
|
|
(...) this seams to be correct :) there might be one problem. If you are to fast, the RCX might loose some ticks. The maximum speed depends on the used firmeware. Carsten (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Rotational Sensor & Gearing Down
|
|
I just got my 1st rotational sensor and have a quick question for you all. I have the following gearing on my robot. Point A gears 8 <--> 40 8 <--> 40 Point B so this is: (5:1) x (5:1) = (25:1) Right? Now if I put my rotational sensor at Point A, do (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Mindstorms for Dummies (off topic)
|
|
(...) Well, in France they are available as 'xyz pour les nuls', and judging from their number they seem to be quite popular. Jürgen (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Mindstorms for Dummies (off topic)
|
|
(...) The english word dummy is derived from the word dumb which has evolved to mean stupid but originally (and still) means silent or does not speak as in a deaf person that does not speak. The use of the word to mean stupid developed due to the (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: CM-RCX comm
|
|
"What's new": 1) I'm still waiting for my RIS 1.0 (hopefully +2 weeks) + Update to 1.5 so, everything I do still uses the Out<->In of a CyberMaster, comunicating with itself (the poor thing). 2) I ordered also a Dark Side MicroScout, for VLL output (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Parallel sensor problem
|
|
Hi, all. I'm experiencing a strange problem. I'm using two RCXs to control my crane, and I have a single touch sensor connected to input 1 on RCX 1 & input 2 on RCX 2. However, when I run both programs, which both have a wait_event function like: (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Motor Speed value interpretation?
|
|
(...) Greetings! Another Ross!! That's three hangin' around here now!! Well, OK ones a Rossz, but it's close enough! (...) driven (...) have (...) two (...) you (...) hit (...) Well, you could work it out really carefully, but then you've gotta take (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: LEGO Cam vs. X10's Xcam vs. other webcams
|
|
(...) Yes, I wasn't talking about a perfect digital image input, only mentioned those DV camcorders because of size and image input quality (and auto-focus, optical zoom, steady-cam capability, etc...) ...*and* because I'll more likely spend major (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: What specifically is the difference between RIS1.0 and RIS1.5
|
|
(...) Well, you, like anyone else, can always do a search in www.lugnet.com/robotics Here is a list found at (URL) Marc Klein <marckl@easynet.fr> Subject: Re: Couple Questions Posted-Date: Wed, 19 Jan 2000 19:26:25 GMT On Wed, 19 Jan 2000 02:29:34 (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Very Newbie Question regarding remote control
|
|
(...) that (...) something (...) for (...) PC (...) Good man :) Thats what we like more AI projects on Lego Mindstorms, I myself am finishing a graduate degree off, with my Dissertation centred around Lego mindstorms It's greate almost half my (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Motor Speed value interpretation?
|
|
Hi all, sorry if this question has been asked before but i was just wondering what the speed values for the motors represent? i have a robot with two motor driven wheels which i would like to be able to make drive in an arc. To do this i have to set (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | RE: Was (Tank Platform)
|
|
I know this isn't scientific or anything but this is what I have observed. If I have a bot with a "crazy" wheel, the direction that that wheel is pointing when the bot starts moving forward controls the bots direction more than anything else. And it (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Agenda Palmtop (was: Very Newbie Question regarding remote control)
|
|
This looks like an incredibly capable little device. Have you already built anything with it? Pictures? (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Ideal Tank Platform Was: adder-subtractor ????
|
|
(...) I guess - but surely - having an asymmetry in the robot's construction is more likely to cause it not to drive straight than the 1% to 2% due to the motor rotation direction. You may be a 'better' builder than I am - and perhaps be able to (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Ideal Tank Platform Was: adder-subtractor ????
|
|
(...) Yeah, I saw that. nice work, that. I figured I'd throw it in anyway on the principle that eliminating error of any source is always a noble cause. I like to use worm drives to 'turn the corner' anyway to get the extra torque so it's not a (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Mindstorms for Dummies (off topic)
|
|
Rainer Balzerowski <balze2@gmx.net> wrote in message news:G7LDC3.8qD@lugnet.com... (...) Dumb is a little less harsh than stupid, but your translation is pretty good. (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Very Newbie Question regarding remote control
|
|
(...) Well, the RCX (the computer "brick" that comes with the $200 Mindstorms set) has Infrared communications with the PC. The amount of RAM in the RCX is rather limited for fancy AI stuff - but plenty for taking simple commands *from* the AI (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Ideal Tank Platform Was: adder-subtractor ????
|
|
(...) Well, if you read my *long* post from a week or so ago, you'll know that motor mismatch makes up at least 11% of performance, motor direction perhaps 1% or at most 2%, and HOW YOU BUILD YOUR MODEL accounts for at least 7% ... even when you are (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: New guy on the blocks
|
|
(...) No - I'm a Linux user and *none* of the software on the CD would work for me anyway. You don't need spirit.ocx for NQC programming. Download the firmware file from Lego's web site - that (and NQC which isn't on the CD anyway) is all you need (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | What specifically is the difference between RIS1.0 and RIS1.5
|
|
Does anyone have a part-by-part listing of the differences between RIS1.0 and RIS1.5? I am under the impression, for example, that there is a white clutch-type gear intended to permit a motor to continue turning if the drive train/robot becomes (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Cold Weather Blues
|
|
(...) ... (...) So where in the city were you demonstrating this project? If it's a public gathering, I wouldn't mind attending some day. Matthias Jetleb VA3-MWJ Eglinton & Pharmacy (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Mindstorms for Dummies (off topic)
|
|
(...) No ! You can get such books in Germany too. I'm not sure of the meaning of "dummies" in american english (more than this puppets used for crash simulations ?) In geman "dumm" means "stupid". -> dummies = stupid persons The same in american (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | VC Doesn't work : (
|
|
Hello. I just got my VC from EToys and installed everything, but I can't get the camera to work. I keep getting the message "The LEGO Cam is currently in use by another application." The microphone test works and "fix it" during the installation (...) (26 years ago, 23-Jan-01, to lugnet.robotics.vc)
|
| |
 | | Re: Mindstorms for Dummies
|
|
Thanks for the info. I'm just getting into Mindstorms, and was thinking about buying it. I think not with the review you gave. Mike Broam (...) (26 years ago, 23-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Where to find RIS?
|
|
Walmart.com has them (although I'm not sure what version), I ordered one yesterday. When I went to check on availability (put an item in your shopping cart, then in the quantity box put a large number like say 1000. If they have less than that they (...) (26 years ago, 23-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
Ralf, If you don't need great precision, an easier aproach might be my Infra-red Relative Distance Indicator. See the link below. (...) -- Pete Sevcik sevcik@flash.net Techno-stuff Robotics (URL) for FUN ! (26 years ago, 21-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) was like this: (...) you reload (...) PC, as you are (...) thing is to read (...) place of (...) optimize it and (...) what you want (...) attribute. Yes, but I'm not sure what could happen if I change those addresses in the middle of the (...) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Very Newbie Question regarding remote control
|
|
(...) I have only worked with the RCX under windows 98, and then mostly using NQC (Not Quite C, a nice programming language/environment supplied by David Baum)but here is my two cents. The PC communicates with the RCX brick via an infrared tower (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Mindstorms for Dummies (off topic)
|
|
(...) Yeah, I'm waiting for "MENSA for Dummies." BEN (FUT OT.fun) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Where to find RIS?
|
|
Where can I buy the RIS. I would like to stay away from ebay, but it seems that everywhere is on backorder or not available. Please Help. Thank You, Greg Ericksen (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Mindstorms for Dummies (off topic)
|
|
(...) A friend of mine was asked to write Chaos for Dummies[1]. He declined[2]. :-) Cheers, Ben. [1] No, really! [2] I wonder if he'd've taken a less dim view of it if they'd called it "Dynamical Systems for Dummies"? -- (URL) is no limit to what a (...) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | RE: Mindstorms for Dummies (off topic)
|
|
I had to laugh out loud at Ralph's description: "Mindstorms for Dummies really does live up to its name." Not likely, but does anyone remember seeing a cartoon called The Ultimate Video Game? Just a single panel, showing an arcade game with a rifle (...) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Very Newbie Question regarding remote control
|
|
Mechanically, LEGO is beautiful to work with. The components are well selected for rapid prototyping. For example, you will find that the hole spacing in the beams and the center-to-center distances of the gears ...seem to work well together. (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: New guy on the blocks
|
|
I think that unless you are going to write your own communications routines, you will need spirit.ocx, and use its functions to talk to the RCX. If you do not use standard firmware, you will not need the cd. These options are also generally more (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Mindstorms for Dummies
|
|
I just got my complimentary copy of Mindstorms for Dummies and its worth every penny! (They had requested permission to put pbForth on the CD) Now, I may be somewhat biased towards the Extreme Mindstorms book that I helped write, but Mindstorms for (...) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: LEGO Cam vs. X10's Xcam vs. other webcams
|
|
(...) This is true, in terms of both lighting and resolution. XCam2 is a cheap, wireless camera. Whether its image quality is good enough for you depends on the nature of your project. In my case, as long as it picks up my barcode tags, I am happy. (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: New guy on the blocks
|
|
Hi Francois, Like you said, if get the firmware from the Lego Mindstorms site and you use NQC, you should not need anything from the CD. Good luck, Gus (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Same firmware (was: Remote dead, what to do?)
|
|
(...) That 's definitely wrong. Robolab uses the same firmware like RIS. But they use different names. In RIS it is named "firm0309.lgo" and in Robolab they call it "firmware.txt". In Robolab 2.0.1 you can find the file in your Robolab folder: (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Very Newbie Question regarding remote control
|
|
Greetings all, I am persuing a grad level course in AI agents, and the course requires that I to do a project. One idea I have is to create a robot and have it do something AI-ish. Since I'm not very adept with hardware, using a Mindstorms robot for (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: IR Tower problems
|
|
(...) BTW, this is not true on all hardware, but usually is true on PCs, which is of course what we care about right now. Serial ports are male (IE, have pins in them rather than holes) because part of the RS-232 specification is that you should be (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Palmpilot and RCX
|
|
(...) Yes. That's basically the idea :) (...) You should mail Charlie (at the omniremote site, there should be an email link) and ask him that question :) (...) Yes. There is an antenna in the Handspring module for sending the X-10 RF messages. (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Cold Weather Blues
|
|
So I took 'The LEGO Spooler' to a party. Assembled the first group of excited people. Opened the shoe-box, lifted it out, started to say: "This is...". Then, the bottom half disconnected, the top half fell on the coffee table, and in five seconds it (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | pbForth is fun!
|
|
I had approached pbForth two or three times in the past, always failing to manage what I thought was a steep learning curve. The truth is I probably was too lazy to put the necessary attention into it, or I was in a hurry to program my robots to (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
am 22.01.2001 15:36 Uhr schrieb Ram Meenakshisundaram unter rmeenaks@olf.com: (...) Hi Ram, please have a look into the data sheets. Then you would say "... the GP2D02 is a very powerful sensor .... but the GP2D12 is better than the GP2D02 for using (...) (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Interfacing Sharp's Distance Sensors to the RCX
|
|
Hi, I was searching a web page which gives an overview about all the sharp distance sensors. I 've found it. I 'm sure that some of yours will read it. (URL) 22.01.2001 15:36 Uhr schrieb Ram Meenakshisundaram unter rmeenaks@olf.com: (...) Hi Ram, (...) (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: Ideal Tank Platform Was: adder-subtractor ????
|
|
(...) Ideally: Both motors should be driven in 'forward' direction so if one had a matched set of motors, you could perhaps achieve lateral speed balance. Forward end of tracks should be slightly elevated to grab and climb obstacles: <- Front * * * (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Gearing down a lego motor
|
|
from my experience it really depends on the application, if you are working on a walker it usually takes a minimum of 1:12 for most of mine, but i don't know waht you are doing. mike "rubbing the weekend out of his eyes" fusion (26 years ago, 22-Jan-01, to lugnet.robotics.rcx, lugnet.robotics)
|
| |
 | | Re: LEGO Cam vs. X10's Xcam vs. other webcams
|
|
That was not a general statement. The X10's quality is poor for indoor lighting. There are several better wireless digital cameras out there that is far better than the X10, but it costs a lot more. Cant beat the $50 I paid for the X10 via ebay (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Interfacing Sharp's GP2D12 Distance Sensor to the RCX
|
|
Hi, Sorry about that I meant the GP2D12 not GP2D02. The subject line threw me off as the original post was about the D02 not D12... Ram (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: LEGO Cam vs. X10's Xcam vs. other webcams
|
|
(...) hmmm... I'm starting to think that the best (and expensive) way to have good quality wireless image is to mount the roverbot with a DV camcorder (those tiny new Digital Video expensive cams) together with a X10 wireless video-sender. :( oh (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | New guy on the blocks
|
|
Hi all, I just got a great deal on a RIS 1.5 but it came without the CD. Is there anything on it that I absolutely need to have in order to use the RIS? I can get the firmware from the mindstorm site right? Do I need any extra stuff in order to (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: LEGO Cam vs. X10's Xcam vs. other webcams
|
|
The Lego Cam's quality is much better than the X10 as I have both. The X10 was designed for outdoor only and as such needs a lot of light otherwise the image is dark. The Lego Cam is the same as the quickcam. However, the wireless ability of the X10 (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | LEGO Cam vs. X10's Xcam vs. other webcams
|
|
Has anyone done (or know where to look for) a review on the image quality of the Lego Cam ? I'm interested to know where the Lego Cam stands when compared with other webcams including analog-video mini-cams like the Xcam ? At least, I would like to (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
(...) The GP2D02 is a very powerful sensor for a robot. Getting it to work will really be great. I think the best bet is to use a 9V battery box for this instead of using a precious output port... Ram (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | RE: pbForth is fun!
|
|
(...) We all suffer from the same problem, Mario, we work with the tools we know! (...) <snip> Thanks Mario. This kind of praise is hard to come by, especially from someone who really knows how to tinker! I have been pretty slack about updatingthe (...) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx.pbforth)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
"Rainer BalzerowskI" <balze2@gmx.net> wrote in message news:G7K0HL.724@lugnet.com... (...) work out the power supply part. Probably taking all the power from the Motor Output or a 9V battery box so you wouldn't need D3 and D4. (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
(...) Another option would be a small battery box, if you have enough space in your model. Jürgen -- Jürgen Stuber <stuber@loria.fr> (URL) (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: Cybermaster: Cannot receive though sending works (w/o sprit.ocx)
|
|
This page (URL) by Bert van Dam, has the (URL) link to the QBasic program I was talking about. mc. (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Cybermaster: Cannot receive though sending works (w/o sprit.ocx)
|
|
Search (URL) page for a link related to DOS comms with CyberMaster. Bert van Dam had (still has?) somewhere in his site a source code of a QBasic program for DOS that he used for CM comms in DOS. It worked, I myself used it with an old i8086 (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | pbForth is fun!
|
|
I had approached pbForth two or three times in the past, always failing to manage what I thought was a steep learning curve. The truth is I probably was too lazy to put the necessary attention into it, or I was in a hurry to program my robots to (...) (26 years ago, 22-Jan-01, to lugnet.robotics.rcx.pbforth)
|
| |
 | | Re: IR Tower problems
|
|
(...) Don't try this at home kids !!!...!!! NO ! This can't work !! The printerport is as parallel port and not a serial port. The availablity of the IR-tower is checked by using the serial handshake line. This can't work with printerport ! (...) I (...) (26 years ago, 22-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
(...) I agree ! (...) How depressing. :-( (...) Of course ! But, it's possible to drive more then one of these sharps with one output. And shouldn't it be possible (without large effort) to use the input-power to multiplex some of the GP2D12 ? (...) (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
Ralf Krause <lego-robotics@crynwr.com> wrote in message news:B691251F.ED3%no...@web.de... Michael, please tell me how you can write that the power can " ... provide 30 mA of power to operate other sensor electronics." As I 've tested it seems that (...) (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Reading PWM Servo Signal into Handyboard
|
|
I need to read the pulse width modulated signal put out by a radio control receiver into the Handyboard. I have thought about using a radio control PWM to electric motor speed controller and feeding this into an analog in port on the Handyboard but (...) (26 years ago, 22-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | Cybermaster: Cannot receive though sending works (w/o sprit.ocx)
|
|
Hi, I've written a small Visual Basic program so I can use Cybermaster under Windows 3.1x. (So I cannot use spirit.ocx.) Sending commands works (motor on/off, sound, etc.). But I don't get any echo. I cannot get any sensor data, and I can't see if (...) (26 years ago, 22-Jan-01, to lugnet.robotics, lugnet.robotics.cybermaster, lugnet.robotics.rcx)
|
| |
 | | Re: IR Tower problems
|
|
(...) I think it could probably work with the printr port. But what I would do is get a serial to printer port adapter or buy another wire which ever is cheapest. I have a wire that runs out the serial port with a 25 pin(i think) connection then an (...) (26 years ago, 21-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Interfacing Sharp's GP2D02 Distance Sensor to the RCX
|
|
Hi, I asked this problem a few weeks (or months??? ... I don't know a what time ...) but nobody could help. I got the same following answer ".... the sensor takes 35 mA and this is to much for the RCX ..." but I couldn't understand this at this (...) (26 years ago, 21-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: programming interface i think
|
|
Don't shoot me if i'm wrong, but this site seems to be mainly about heat and energy. There is a link about using the RCX with Borland C++. When you download the file, you get the information on how to do this (in english) frank "not much left to (...) (26 years ago, 21-Jan-01, to lugnet.robotics)
|
| |
 | | RE: Anyone made animatronics with the RCX yet?
|
|
(...) I know this only works with pbForth, and it's not ALL Technic, but you can drive standard servos with the RCX. Here's how: (URL) You can even drive pneumatic switches with the servos... Cheers, Ralph Hempel - P.Eng ---...--- Check out pbFORTH (...) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: IR Tower problems
|
|
(...) Hi Greg, I'm not sure if the RCX IR Tower is the same than the Scout Tower, but I guess it's so. You can't use the printer port (LPT) for the tower. You have to use a serial port (COM1, COM2, ..). If you're not sure if you've got the right (...) (26 years ago, 21-Jan-01, to lugnet.robotics)
|
| |
 | | Re: IR Tower problems
|
|
(...) Eep!!! Not PRINTER port but the SERIAL port. You'll damage your Port and maybe the IR tower as well! Try it in the SERIAL port and it will work much better. Dean -- Coin-Op's For Sale!: (URL) Lego Workshop: (URL) Lego Club: (URL) (26 years ago, 21-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Anyone made animatronics with the RCX yet?
|
|
(...) I tried to have my Raptor puppet set up with Pneumatics but I gave up because I couldn't find a decent way of triggering it. The ways I had it were way to slow and painful. Has anyone come up with a great way of using pneumatics with (...) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | IR Tower problems
|
|
I recently purchased an IR tower to use with my Scout. It did not come with a cable, but the tower was only 6$(www.eblok.com), so I found a cable that could plug into the back of it. The other end of the cable fit into the printer plug on the back (...) (26 years ago, 21-Jan-01, to lugnet.robotics)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) Ok. Checking and testing never hurts :-). (...) It's not for performance, but for correctness. The old code was like this: if(lnp_addressing_ha...ler[port]) { ... lnp_addressing_handl...th-2,src); You first test lnp_integrity_handler and then, (...) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) you may see (...) give access (...) the handlers (...) My only (...) depend on. (...) introduce a (...) this point to (...) I think that we can use safely (CONF_TM || defined CONF_HOST) condition. I'm checking the whole patch and I think that (...) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Anyone made animatronics with the RCX yet?
|
|
I'd like to make some sort of Disney-style animatronic robot with my RCX. This would involve using all three motors to control a Tiki Room-style parrot, for example, with a rotation sensor on each motor. Programming the robot would involve running a (...) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: RCX 1.0 Power Jack/AC Adapter Question
|
|
(...) I've ran my RCX 1.0 on a train power adapter for 2 weeks straight. No problems. Dean -- Coin-Op's For Sale!: (URL) Lego Workshop: (URL) Lego Club: (URL) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: RCX 1.0 Power Jack/AC Adapter Question
|
|
You can use any of the AC adapters from the 9V train sets on the RCX 1.0. I use the ac adpaters from the 4561 and the feight train (red and black) and I have never had any problems. Ahui (...) (26 years ago, 21-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | RCX 1.0 Power Jack/AC Adapter Question
|
|
I just snagged another 4561Railway Express. I believe I recall reading that the AC adapter in that will work with my RCX 1.0. Can anyone confirm this? Thanks, Thomas (26 years ago, 21-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Trouble working with PORTC
|
|
Yes, I'm answering myself. I now notice that Port C is being used by the LCD. Therefore, I'm guessing that this is part of the problem (the whole problem, a really big problem?). I'm still curious as to how Port C might be shared - is it still (...) (26 years ago, 20-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | Trouble working with PORTC
|
|
I'm having a little trouble working with Port C on my 68hc11. A little background: the 68hc11 is part of a rug warrior pro. This board brings Port C out to an expansion socket which I can access. I'm generally using Interactive C 3.1 to work with (...) (26 years ago, 20-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | Beta Release of MacNQC
|
|
Hi all, I have been working on an updated version of MacNQC and am now ready for a public beta. If you are interested in it, it can be found at (URL). There are some new windows to control the RCX and the compile has been updated to NQC 2.2r2. Rob (...) (26 years ago, 20-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Sonar and the expansion board.
|
|
Hi, Try some of these techniques from the sites list here and see what you get. If you still get the errors in readings then you should assume that there is a problem with the board. Fortunately all chips on the board are replaceable and there is a (...) (26 years ago, 20-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | Re: Palmpilot and RCX
|
|
(...) I've just read that version 1.2 of the program will have a programmers interface. Would this allow NQC to be ported to it and be useable for Downloading Firmware, Uploading programs and sending msg codes? With a Visor Platinum would I be (...) (26 years ago, 20-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Scout and External Iight sensor question
|
|
(...) Scout has a special command for RAW. Sensor ValueRaw(n); x = SensorValueRaw(0); This is taken from page 28 of the NQC manual. Hope that helps. Dean -- Coin-Op's For Sale!: (URL) Lego Workshop: (URL) Lego Club: (URL) (26 years ago, 20-Jan-01, to lugnet.robotics.scout)
|