 | | Re: Serial routines
|
|
[Jeff Keyzer] spake unto the ether: [Re: my serialio.c and conio.c libraries] (...) This is good to hear...if there is anyone else out there using the routines, with either success or failure stories, please let me know. One design issue I wasn't (...) (29 years ago, 5-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | serial routines
|
|
I was just curious with all the talk about serial routines if anyone has sucessfully attempted a wireless data link to the handyboard to the PC. It seems like if you had a fast enough wireless modem with a clean enough connection you should be able (...) (29 years ago, 5-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: DC adapter
|
|
(...) Isn't this a bit sweeping? Surely the problem is that a 12v regulated supply will not have enough headroom with a 9.6V battery. I use a 7.2V battery without problems (that I am aware of).It is not the regulation that is the actual problem but (...) (29 years ago, 5-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: DC adapter
|
|
a regulated supply would be really nasty when you put the interface board in ZAP mode -- the supply would try to raise the level of the battery to 15v or whatever, and that would be bad. so unless you really know what you are doing, steer clear of (...) (29 years ago, 5-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: DC adapter
|
|
Hmm... As usual I opened my mouth only to change feet. Naturally, for my own reasons, I disabled zap mode on my board so I did not think about that. (...) -- ===...=== peter.harrison@cannock.ac.uk Cannock Chase Technical College (29 years ago, 8-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Help Error during assembling the HB
|
|
There are a couple of versions of DLM out there. The one I have I have to type : dlm pcode_hb -ram -256 for it to work on my handyboard. I also have to use it from a DOS 6.x machine, on a Win95 machine it complains about memory errors which are very (...) (29 years ago, 8-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Help Error during assembling the HB
|
|
Hello, I am assembling a Handy Board with Gred G. Martins Assembling instructions. But after step 6 the download of the file pcode_hb.s19 produces the following error: 'DLM: 6811 File Downloader with Intelligent EEPROM burn by Fred 'Martin portions (...) (29 years ago, 8-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | My robot is on the web
|
|
Just in case any of you would like to see my robotic creation it is now on the web as: (URL) me what you think. Keith Keith Soldavin kas219@email.psu.edu (URL) (29 years ago, 11-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | (no subject)
|
|
I'm trying to build a rs-485 netwotk. Do you know if exist some protocol to start to work? German Pablo Gentile Systems Engineer. Electronics Expert. (really??? ;>) ) ggentile@cvtci.com.ar (29 years ago, 11-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: My robot is on the web
|
|
Keith, Pretty cool! How'd you get the sonar servo to rotate 180 degrees? Mike Ross (...) (29 years ago, 11-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | IR sensor
|
|
Hello there, Is it just me or can I not find any specific information dealing with the functions for the HB's IR sensor, (not the sony_ir stuff). What are the arguments the functions carry? What do they return? Basically, how do I use it? I just (...) (29 years ago, 11-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Have 68HC11's - will trade for Motor Drivers etc.
|
|
I have a limited supply of Motorola MC68HC711E9CFN2 chips I will trade for other Handy Board Components (Motor Drivers, IR receivers, LCDs etc). The 12K OTP ROMs have been previously programmed. The chips come with the OTP ROM contents zeroed and (...) (29 years ago, 12-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | How to get IC 3.1 ?
|
|
Hoi, Anybody got a clue how to get Interactive C and the corresponding registration key ? I ordered it with DSMC and lost contact since. My key expired ofcourse without any response from them what so ever. I mailed DSMC again without any luck so I'm (...) (29 years ago, 13-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Batteries problem
|
|
I am trying to connect the batteries to the HB but after hours of charging the screen doesn't turn ON. The batteries are two packs of 4 and I connect the two reds with +ve and the two blacks with -ve Is there any case that I connect the wires (...) (29 years ago, 14-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Batteries problem
|
|
The packs you are using are 4x1.2V=4.8V. That's not enough for the HB to operate on. You need to connect the two packs in series and then to the HB. The red of one pack goes to the black of the other. The remaining two wires, red and black, one from (...) (29 years ago, 14-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | anywhere to buy IC 3.1 besides Digital Micro Systems?
|
|
I have been trying for most of this week to access the online ordering form at Digital Micro Systems (the link from the Newton Labs page) to order a copy of IC 3.1. The first couple times I tried, I actually got to the form, but it barfed when I (...) (29 years ago, 14-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: anywhere to buy IC 3.1 besides Digital Micro Systems?
|
|
Greetings, Mr. Drushel, HandyBoard list, An email sent earlier to this list from Newton Labs indicating that they would be selling its product directly, (while DMSC is offline, I take it). Regarding the same subject, I would like to inquire if (...) (29 years ago, 14-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | How to order IC 3.1
|
|
(...) Firstly, we wish to apologize to the Handyboard community for difficulties purchasing Interactive C 3.1 through Digital Micro Systems. We've tried to contact DMS, but no luck so far after the move. We are attempting to make a deal with them to (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | IR and Sonar
|
|
I was using the IR sensors that ship with the handyboard from Gleason Research up until recently. I managed to melt both of them. Anyways, I am looking for some good IR sensors and emitters that can detect an object before my robot hits it. :-) Can (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Batteries problem
|
|
(...) Avoid this problem by using a pre-assembled battery pack. I sell an 8 AA 9.6v 650mAH shrink wrapped pack with solder tags in the UK for GBP15-00 including UK postage and VAT. Also available with leads, plugs etc, name your choice. If this item (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | sony ir files
|
|
Hello fellow Handyboard users, I am a student at Albion College who is doing a directed study in robotics. I have been trying to use the sony-ir.icb file on the Handyboard. I followed the user guide instructions by replacing the r22_ir.lis file with (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | RS-485 Network
|
|
I'm trying to build a rs-485 netwotk. Do you know if exist some protocol to start to work? German Pablo Gentile Systems Engineer. Electronics Expert. (really??? ;>) ) ggentile@cvtci.com.ar (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Motor wiring and capacitors
|
|
Hello handy boarders I have a wire guided car that I want to us as a robot platform. It has differential steering. The wiring of the two motors has a total of 3 wires with a jumper cable between the two motors. Can I wire the existing black, red, (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Motor wiring and capacitors
|
|
Hello handy boarders I have a wire guided car that I want to us as a robot platform. It has differential steering. The wiring of the two motors has a total of 3 wires with a jumper cable between the two motors. Can I wire the existing black, red, (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Dual Hall Effect Sensor hook up
|
|
I have the Micro 8SS27 dual hall effect sensor (received from Gleason Research), which I intend to use for a shaft encoder. Can someone help me figure out how to hook it up? Thanks. To get random signatures put text files into a folder called (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: IR and Sonar
|
|
Try Radio Shack, Digikey, Mouser Electronics for IR stuff. Polaroid OEM Components Group. 800 392-1170 2 sonars for $99. It's a bit pricey so whether it's worth the money depends on you. It may be worth is just to get used to tinkering with (...) (29 years ago, 15-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | PCode
|
|
Hello, I'm trying to decipher IC's command stream w/ the handyboard. I've downloaded the IC source, but before spend a lot of time munging the code, are there other documents describing the theory of the Pcode interpreter? I imagine it was a lot of (...) (29 years ago, 16-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | mc68hc11a1fn and sonar
|
|
hello, everyone I have 2 questions: Does anyone know of any good books or sites about the motorolla mc68hc11 family? I'd like to understand on how this actually works and stuff. Is the Motorola mc68hc11 reference manual a good book for the job? Are (...) (29 years ago, 16-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: mc68hc11a1fn and sonar
|
|
Hi, In addition to de reference manual I started reading a book called "Microcontroller technonoly, the 68hc11" by Peter Spasov (ISBN-0-13-583568-2). I think it's a rather good book. It begins with the fundamentals of microcontrollers. It handles (...) (29 years ago, 16-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: mc68hc11a1fn
|
|
(...) Check out (URL) for 6811 info, Motorola's own site with a wealth of good downloadable stuff. Regards Colin Barnard Miranda Robotics 'O brave new world that has such creatures in it' 54 London Road Teynham Kent ME9 9QN England (29 years ago, 16-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | mc68hc11
|
|
hi Are all chips in the mc68hc11 family alike? in other words, coulda mc68hc11a1fn chip replace any other mc68hc11 chip? Ore are the circuitry diffrent? Also, i was checking out motorolla's mc68hc11 website, and they had a 'hc11 referense and (...) (29 years ago, 17-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Homebrew Sonar
|
|
(...) Check this site out, it might be what your looking for: (URL) pretty complete with theory, schematics, construction advice, etc.. I hope it helps. Terry King Terry.King@fmr.com (29 years ago, 17-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Homebrew Sonar
|
|
Check out (URL) There's some basic theory and 6811 assembly code in there for doing time-of-flight stuff with el cheapo 40kHz transducers we got from All Electronics Corp and some homebrew circuitry. Colby --- "King, Terry" wrote: (...) --- end of (...) (29 years ago, 17-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Homebrew Sonar
|
|
Here's an idea for homebrew sonar that I keep mulling over but haven't built yet. If anyone builds one of these be sure and tell me if it doesn't work so I won't :-) Basically the idea goes like this: take a signal generator (like the EXAR chip) and (...) (29 years ago, 17-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: mc68hc11
|
|
The 68hc11s all have the same core processor. They are not all the same; they have different peripherals, pins, ports, etc. The a1fn is the a8 with the rom disabled. So it is pin compatible. Check out the pink book or www.mot.com for more details. (...) (29 years ago, 18-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | mini ssc
|
|
Hi, Has anyone successfully interfaced the handyboard with Minissc II servo controller by lynxmotion? I'm thinking about purchasing one, however is it cheaper to build one yourself? anyone did this? thanks, phet (29 years ago, 18-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | polariod sonar system
|
|
does anybody have a circuit for a polariod sonar/traking system, I've got three polariod transducers in my spare's box and I desperatly want to use them on my 'bot. (29 years ago, 18-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | LEGO motors and the handyboard ?
|
|
L.S. Recently I connected 3 standard LEGO motors to the Handyboard to power a 4 wheel driven LEGO model I build. With the standard LEGO (9v 7VA) adapter I can easily run 3 motors at once without any noticable slow down of any of them. But when (...) (29 years ago, 19-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Handyboard and TTL ?
|
|
L.S. I come across all nice little modules wich send out TTL signals like light sensors, clock modules etc. I would like to use a couple of them to spice up my robot but haven't got a clue what TTL is and how to use it. I tried to look on the (...) (29 years ago, 19-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Pseudocode
|
|
Hello, Im very new to the list and to the entire concept of all of it basically. but- i'll cut to the chase (its breif) Just learning c programming i ran across a chapter in the book which explains pseudocode and its impact. I dont know how many (...) (29 years ago, 19-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: LEGO motors and the handyboard ?
|
|
The HB gets reset due to the large current drawn from the motors. You should separate HB and motors power supply. What you need is to cut the trace (+ve motor power share with HB main power) nearby J13. Then, apply motors power supply to J13 and (...) (29 years ago, 19-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Pseudocode
|
|
(...) One thing to remember: the input is the world (through the sensors) and the output are the robots actions on the world. A program outline repeat turn on drive motors repeat read wall/obstacle sensor until sensor reads an obstacle stop motors (...) (29 years ago, 19-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: LEGO motors and the handyboard ?
|
|
Cutting the trace is only ONE solution! I had the same problem and did not consult the handyboard FAQ on the web. This FAQ gives you some options if you don't want to damage your board. Another solution is to use your own custom H-bridge, or do like (...) (29 years ago, 20-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Pseudocode
|
|
I think what you may be wondering is how does the code do all this at once instead of sequentially as normal code runs. If you are not wondering this then I'll tell you anyway. The awesome feature of the handyboard is the pcode. The pcode is a (...) (29 years ago, 20-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | fun under the sun...
|
|
Hey folks looking for a cheap source of solar cells... I wanna make something around 8 volts and between .5 to 1 amp The load will be that of a "modified" rc car motor (ball bearings, slot armature, 15 winds) Any help would be greatly appreciated (...) (29 years ago, 20-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: fun under the sun...
|
|
From the "other" mailing list I'm on (BEAM robotics), try: www.solarbotics.com They have a lot of parts and information for solar powered robots. I've bought stuff from them and had good experiences. (Although getting a flimsy bubble-pack envelope (...) (29 years ago, 20-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Ultrasonic Rangefinder
|
|
Did anyone ever opened up a Polaroid Spectra Instant camera? I did. The sonar rangefinder is almost identical to the Polaroid 6500 exept there are some problems that I encountered 1) BLNK and BINH have no efect on the ECHO output 2) The ECHO signal (...) (29 years ago, 20-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Ultrasonic Rangefinder
|
|
I've used the sonar board and transducer from several Polaroid "Pronto Land Cameras" for just that purpose in that past. I don't know how these compare to the Spectra; I would assume they're similar if not identical. There was an article in an old (...) (29 years ago, 21-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | polaroid transducers
|
|
does anybody out there have any schematics for using the polaroid transducers on the handyboard, I have two such transducers, but havint got a clue how they work or how to connect them to the handyboard. I'm also very interested in what Bill Richman (...) (29 years ago, 21-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: polaroid transducers
|
|
(...) poor handyboarders? i beg to differ. -see ya (yes i know. this is only in jest) :) _/_/_/_/a cyberNETix organiZM_/_/_/_/ (URL) _/_/_/_/_/_/_/_/_/_/..._/_/_/_/_/ (29 years ago, 21-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Ultrasonic Rangefinder
|
|
(...) Hi Eric (...) The answer is no, what I used is the schematic diagram for the Polaroid 6500 rangefinder board. the circuit is almost identical exept for a transistor preamp betwen the transducer and the receiver. The only way I can initiate a (...) (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Ultrasonic Rangefinder
|
|
(...) Better yet - can you make this available by ftp or on a web site somewhere? I too have an old autofocus Polaroid camera (can't remember the model) and would like to use the ultrasonic gubbins from it. Thanks Pete (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Ultrasonic Rangefinder
|
|
(...) Better yet - can you make this available by ftp or on a web site somewhere? I too have an old autofocus Polaroid camera (can't remember the model) and would like to use the ultrasonic gubbins from it. Thanks Pete (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | please reply to pshaltis@alpha.albion.edu
|
|
From: IN%"PSHALTIS@ALPHA.ALBION.EDU" "NAME=I'll have the hair of the dog that bit me." 15-SEP-1997 18:00:37.88 To: IN%"handyboard@media.mit.edu" CC: Subj: sony ir files Return-path: <PSHALTIS@ALPHA.ALBION.EDU> Received: from aleve.media.mit.edu (...) (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Bare boards
|
|
I like to buy a couple of bare boads of the the Handy board. Any help will be greatly appreciated. Thanks, Carlos. (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Bare boards
|
|
(...) Douglass electronics sells blank handy-boards for $12 if you buy at least two, with greater discounts for larger purchases. Check out: (URL) that helps. Jeremy C. Thorpe -- jer10@hotmail.com ---...--- homepage: (URL) (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: polaroid transducers
|
|
You have to have the transducers and the ranging module that goes with it. Look here for directions: (URL) mar Master of Engineering Candidate Project: Mobile Robotics mar@cooper.edu (212)353-4356 Department of Mechanical Engineering The Cooper (...) (29 years ago, 22-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Bare boards
|
|
(...) You can buy it from Douglas Electronics on the net (URL) got my board from them, good service! (29 years ago, 23-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Ultrasonic Rangefinder
|
|
(...) Howdie Unfortunately my board does not look anything like yours. Too bad, but if anybody is interested in the hack for a sonar board out of a Polaroid spectra camera let me know! I'll provide a pic next time. Bye Bye (29 years ago, 23-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | PORTD WOM Control Bit
|
|
Hello to all, I'm trying to link one pic homemade board with the HB using I2C. To implement I2C in the HB side, I want to use two pins from PORTD, and I'd like to configure it (PORTD) in a wired-OR way. To do that, I think I need to do something (...) (29 years ago, 23-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | IR Stuff
|
|
Hi There, I'm pretty new to the handy-board as I am currently a third-year undergraduate at the University Of Sheffield undertaking a robotics dissertation using the handy-board and haven't a clue how to use it properly. I was wondering if anyone (...) (29 years ago, 23-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Handy Board diagram?
|
|
Hi all, A few weeks ago I downloaded, printed and deleted a very detailed diagram of the Handy Board, showing every pin of every connector. Now I'd like to download it again and print a fresh copy, but I can't find it. Can anyone point me to it? (...) (29 years ago, 24-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Handy Board diagram?
|
|
is it (URL) ? that is linked from the assembly notes page. -fred In your message you said: (...) (29 years ago, 24-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | radio modems
|
|
Does anyone know of a cheap supplier of radio modems? I am looking for something with a few hundred foot range that can do 9600 bps. Any hints would be appreciated. -Jeremy ___...___ Jeremy Green jag@world.std.com jag@brownout.com (URL) (...) (29 years ago, 24-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: PORTD WOM Control Bit
|
|
(...) yes it is normal to receive errors when posting to the list. here is an excerpt from the 'welcome msg' i send everyone when joining the list: 5. When you send to the list, YOU WILL GET BOUNCES. This is normal, there are always some bad (...) (29 years ago, 24-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | RE: PORTD WOM Control Bit
|
|
So it can be done!. Thanks. You've been my only answer, but I've received four error messages from media.mit.edu. Is this usual?. Did you receive my message from the HB mailing list? (...) from the HB using the SPI port. Works great. (...) (29 years ago, 24-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | bounced undelivered messages
|
|
<bold>Marce writes: </bold><x-quoted>I've received four error messages from</x-quoted> <x-quoted>media.mit.edu. Is this usual?</x-quoted> The last message that I personally sent to the handyboard list returned 8 error messages regarding bounced (...) (29 years ago, 24-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Handy-Board.
|
|
Hi, My name is Sudeshna and I am a student of Wichita State University, Kansas, pursuing a Bachelor's degree in Electrical Engineering. I'm working with a team of 7 on a project of building a robot for which we are using the handy board. All the (...) (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | 68hc11 & z80
|
|
hi! This is probably beyond the scope of this group. Please forgive me for it. I merely would like to know a couple of things on this subject: if you know of a better place for me to get some info, I'll go there. Thanks again! My question is this: (...) (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: 68hc11 & z80
|
|
(...) Hello Phil- I have built systems in the past around both CPUs you mentioned. Here is my two cents worth- The Z80 is a very easy processor to understand and work with. You are correct that they are quite cheap these days. They are also very (...) (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Handy-Board.
|
|
hi, there are a group of us from the university of Victoria (canada) that have built handy-boards for the purposes of robot control. Currently two of us are taking courses in assembly programming. The boards accept s19 codes readily, but its a pain (...) (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Handy Board diagram?
|
|
(...) Actually, no, that's not it. The one I'm looking for identifies every pin on every connector. It also says "V.1.1" in the corner, but there's no URL or author. Ken Bullis kbullis@aimnet.com (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Handy Board diagram?
|
|
maybe is it the schematic? (URL) your message you said: (...) (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | RC Systems-speech synthesizers
|
|
Hello All, I'm about to order a speech system from RC. I remember a few months ago this was discused on the list. Could anyone tell me which model would be best for the Handyboard(V8600 or V8601)? Also how difficult it would be to connect it to the (...) (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | HB Users in NY
|
|
Hi, I was wondering if there's any Handyboard owners in the New York area. Or if anybody knows of any robot clubs in the NY area. (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Servo Motors
|
|
I am kind of new to the Handy Board and I am wondering which slots the servos go into. Any information will be very grateful, Thank You (29 years ago, 25-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Servo Motors
|
|
You can attach a servo to either Port A Bit 7 (Input 9) or Port A Bit 5 (TO3 (under the lcd display)) Which ever port you use you will need the code at the handyboard home page under software and dual servo control to make it work. (URL) hope this (...) (29 years ago, 26-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Shematic printed trouble
|
|
(...) ***...*** * Frederic GIAMARCHI * * I.U.T. G.E.I.I. de NIMES * * 8, Rue Jules RAIMU * * 30907 NIMES CEDEX * * * * Tel.: 04 66 62 85 30 * * Fax : 04 66 62 85 01 * * Email : giamarch@iutnimes.un...-montp2.fr * ***...*** (29 years ago, 26-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: HB Users in NY
|
|
Here in NYC. :) ---...--- ericson mar Master of Engineering Candidate Project: Mobile Robotics mar@cooper.edu (212)353-4356 Department of Mechanical Engineering The Cooper Union for the Advancement of Science and Art ---...--- (...) (29 years ago, 26-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Small casters
|
|
does anyone know where to get a small caster? The smallest one I've found is one with a 1.25 inch wheel. I want a really small one like 3/8 inch load hight. I know that's kinda small but otherwise, I'll settle for the smallest I can get my hands on. (...) (29 years ago, 26-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | servo motor
|
|
How exactly do you hook up the servo to the PA7 pin? Such as which hole is the positive, negative, control. any help would be very appreciated Thank You, Adam (29 years ago, 26-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Serial Drivers
|
|
Does anyone have any handyboard code that implements a second serial port? I need the board to speak serial while still connected to my pc. (29 years ago, 27-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: HB Users in NY
|
|
I'm just down the street in the east village, and I've got a friend doing handyboard stuff in the lower east side. --Jerry (...) (29 years ago, 27-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Handy Board diagram?
|
|
(...) Well, I was just poking around the web page, and I think I found what you were looking for (if you haven't found it already...), I highly suggest anyone who is interested to look at it, it's really cool. BTW, I ordered a HandyBoard from (...) (29 years ago, 28-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Small casters
|
|
(...) You could try opening up any personal cassette player. I have used several of these. They have a rubber wheel (capstan head, pinch wheel I don't know what their proper name is) on a very convenient metal bracket. Most of the ones I have seen (...) (29 years ago, 29-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Small casters
|
|
Mar, I've never seen a caster as small as you describe, but I have seen something that might work. I use a "captured ball" bearing instead of a caster on my robot, and it works really well (no swivelling needed to change direction). I got these at a (...) (29 years ago, 29-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Control Program Size
|
|
Hello, I'm most likely going to use the Handy Board for a robotics project I'm working on, but I have one concern. I don't know if 32K is enough memory for my control program. We are building several small robots to simulate under-water mine (...) (29 years ago, 29-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Small casters
|
|
I think you're talking about a game called Crossfire (it was very popular about 6 years ago), and there are still quite a few floating around (though I don't think they make it anymore), you should try some garage sales. BTW, the reason I know this (...) (29 years ago, 30-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | servos going in circles
|
|
Hi, I am trying to built my first robot and I have a question. I tried to make my robot "to be" move straight. (I am using the servos routines from the HB web page.) When I start the servos the robot just goes in circles not straight. I try flipping (...) (29 years ago, 30-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Speech synthesizer
|
|
Hello All, I'm about to order a speech system from RC Systems. I remember a few months ago this subject was addressed on the list. Could anyone tell me which model would be best for the Handyboard-(V8600 or V8601)? Also how difficult it would be to (...) (29 years ago, 30-Sep-97, to lugnet.robotics.handyboard)
|
| |
 | | Hardware or software??
|
|
Hello, all. I've just gotten my handyboard from Gleason Research, and I am totally ecstatic to have these awesome capabilities physically possible at last. Well, anyway, I have had a few problems. First of all, IC (I have the freeware version) is (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Hardware or software??
|
|
Hi Rob, Based on the messages you're getting, I'm guessing you're running freeware IC under windows. If you run under DOS, it should work great. The problem is that, since freeware IC doesn't call Windows serial communications routines, it will (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: servos going in circles
|
|
(...) Hi, there are two solutions : 1. (the simple one) The DC motors only seem to be the same but they are not. Add resistors to one motor until your robot moves straight. Determining wich motor should be connected to the resistors must be done by (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Burning hot motor driver chips.
|
|
Anthony can correct me if I'm wrong, but generally the phrase "converting an R/C car" means, taking a Radio Controlled model car, modifying and/or removing the radio receiver and motor driver circuitry, and replacing it with a computer. The generic (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: L239
|
|
The L293E is not a replacement for the L293D. The D suffix means "Diode" and it includes the snubber diode to prevent the chip from being destroyed by inductive loads. --Chuck (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Book query
|
|
I may have my fall release dates confused but what I would really like to know is when our vaunted estemed Handyboard Gru's book is going to be available?! This mailing list is excellent but I need the Handy Board Rosetta stone. I wish too, that the (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: Hardware or software??
|
|
(...) This is normal. Here is an excerpt from the testing notes: The Handy Board will display the message ``Press START to test knob...'' on its LCD screen. Press the START button, and the screen will show the message ``Turn knob; STOP to end -> (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Handyboard, Interface, and charger For Sale
|
|
I have a working handyboard, interface and charger for sale. I am just quiting tinkering with robotics and want to get it sold ASAP. Inquire at 501-996-2268. This is in Fort Smith, Arkansas. All goes for $250.00 and I have lots of extra parts that (...) (29 years ago, 1-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: HTML or Plain Text?
|
|
text- most definately! not everyone uses Microsh*t as their OS. (Contrary to what Mr. Gates wishes you to believe I'm sure) (29 years ago, 2-Oct-97, to lugnet.robotics.handyboard)
|
| |
 | | Re: HTML or Plain Text?
|
|
Hi! Please use plain text. Not all mail programs support html(for example pine) Lars ~~~...~~~ "You see things; and you say "Why?" But I dream things that never were; and say "Why not?" George Bernard Shaw Lars Olsson Kruthornsv.54b,nb 192 53 (...) (29 years ago, 2-Oct-97, to lugnet.robotics.handyboard)
|