To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.roboticsOpen lugnet.robotics in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Robotics / *27369 (-100)
  Re: ROM Firmware size limit? Firmdl bug?
 
(...) Hmm. Quad speed downloading in Version 3.1 doesn't seem to work under Cygwin on W2K (though single speed does). It always returns either a 'write: permission denied' of 'bad ir link' error (which one it is seems to be random!) , even if the (...) (26 years ago, 17-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: handy board malfuncuion
 
Olivier, I have seen this problem come up on my Handyboards from time to time and usually when I switch between the two Handyboards that I have. I don't understand why it happens but my solution has been to delete the P code and reinstall it to the (...) (26 years ago, 17-Mar-01, to lugnet.robotics.handyboard)
 
  Re: leJOS: anyone building under Cygwin? problem! (very long, not wrapped)
 
(...) I think that if you are running this under bash (which it sounds like), you need to have only colons in your classpath. I had some of these same problems when I was trying to get TinyVM to run on Cygwin, although I wasn't using ant. Andy (...) (26 years ago, 17-Mar-01, to lugnet.robotics.rcx.java)
 
  Re: handy board malfuncuion
 
olivier lanvin schrieb: (...) Try downloading "mon" that comes with "ic". It is a little debug tool that loads into the HC11 without using external hardware (except the serial port). With "mon" you can test the external RAM, LCD, etc. If "mon" does (...) (26 years ago, 17-Mar-01, to lugnet.robotics.handyboard)
 
  Re: Remote Control Internals?
 
(...) Hi Greg, Have you managed to obtain any info on the remote yet? I would like to build my own. Happy hunting, Paul Wilson (26 years ago, 17-Mar-01, to lugnet.robotics.rcx)
 
  Re: BrickBots.Com Contests Extended - Balancing a Pendulum is HARD!
 
I'm glad you are extending this too. I have something in the works that I think might succeed. Gus (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: BrickBots.Com Contests Extended - Balancing a Pendulum is HARD!
 
(...) I've built two different designs, each of which can stay balanced for typically 6 seconds or do before giving up and dying spectacularly (one of these was nearly as tall as I am). I'm glad you extended the contest - I still have hopes of (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: new robot webpages
 
(...) Hi LVQH, nice work ! Have you seen my 6-legged ? Have a look at : (URL) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Robotics Contest
 
Our College is sponsoring a Lego Robotics Contest for Middle School, High School, and College students. Visit my LUGNET page located at (URL) for more information. Once there you will find a link to our official college site that provides (...) (26 years ago, 16-Mar-01, to lugnet.robotics.edu) ! 
 
  Re: leJOS: anyone building under Cygwin? problem! (very long, not wrapped)
 
(...) Twice, even! (...) I think it is. Putting "" around the entire classpath fixed the problem. This works: /prosrm/lejos:lejosc -d D:/dev/prosrm/build/classes -classpath "D:/dev/jdk1.3/j re/lib/rt.jar;C:/tem...arser.jar" D:/dev/prosrm/lejos/src/L (...) (26 years ago, 16-Mar-01, to lugnet.robotics.rcx.java)
 
  Re: leJOS: anyone building under Cygwin? problem! (very long, not wrapped)
 
(...) [snipped description of garbage characters output from lejosc] I hate to follow up to my own post, but I have some more info. This command line, with one item in the classpath, succeeds (well, it actually launches the compiler on the correct (...) (26 years ago, 16-Mar-01, to lugnet.robotics.rcx.java)
 
  new robot webpages
 
Hello! I'm happy to anounce that my homepage is now avaiable for you to visit at (URL) must recommend you to see the 6_legs_bugs. in Lego robots section. Please feel free to comment the site. In the "links" section I referred to some of the sites (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  leJOS: anyone building under Cygwin? problem! (very long, not wrapped)
 
I'm trying to run lejosc under Cygwin, and I'm running into an unusual problem. Background: I am actually attempting to fix up a system so that I can use Jakarta-Ant (URL) to manage the build process. It's a long story, but we use Ant here at work (...) (26 years ago, 16-Mar-01, to lugnet.robotics.rcx.java)
 
  Re: Edge Tracking SteerBot LUGNET Page
 
(...) I especially like the way you put the motor next to the differential, I wish I had had that idea when I encountered the same problem. While we're at it, I just saw that there is a racing competition for edge-tracking robots coming on in (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: Which H8
 
The RCX uses the H8/3292, a member of the H8/3297 series. (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: killer mindsorms robots [okay, my bad]
 
I've picked up some good books recently: "The Robot Builder's Bonanza 2nd Ed", (URL) has some Mindstorms contents and circuit diagrams for new sensors, but is mainly aimed at constructing robots from wood, plastic, metal, etc. "More Advanced (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Which H8
 
Hitachi makes several versions of the H8 processor. Could anyone tell me which version (H8/3???) is in the RCX? Thanks. Bill Taffe Plymouth State College (NH) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: Edge Tracking SteerBot LUGNET Page
 
(...) What's there to say? The pictures say it all, excellent pice of work! - Minimalistic design, (I like that). - Ingenious solution/construction. - Really good programming. I have try build one by looking at the pictures... //Harri Manni -"Do not (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  handy board malfuncuion
 
Hello from France. I Have assembled a Handy Board which was well working for 3 monthes, but yesterday I began to have loading problems: The pcode loads successfully, but when the second phase of loading is attempted, a message error occurs: There is (...) (26 years ago, 16-Mar-01, to lugnet.robotics.handyboard)
 
  Re: Edge Tracking SteerBot LUGNET Page
 
I am very impressed with that robot, the first time i saw the movie, month ago or so, I made the same "whoa" sound as the other people did in the clip. I'd never guessed a line following robot could move so fast, but I'm just a novice, I've only had (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: Edge Tracking SteerBot LUGNET Page
 
Since my original posting I have added an animated GIF of the robot going around my test track. This animated GIF was made from a QuickTime .mov file. This was my first attempt at making animated GIFs. They are pretty cool but they do require a fair (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: More juice out of the standard motors.
 
I used to regularly drive LEGO 9V motors at about 12V with no observed damage. I assume the increased power/torque would be proportional to the voltage, i.e. 33% more voltage gets you 33% more power/torque. However, I don't know how to get more than (...) (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Edge Tracking SteerBot LUGNET Page
 
I just put up a page with photos and NQC code of my SteerBot robot. SteerBot is an edge tracking robot that steers like a car. (URL) background: Since getting my first Mindstorms kit a few years ago, I attempted several times to build a line or edge (...) (26 years ago, 16-Mar-01, to lugnet.robotics)
 
  Re: Sample Code
 
Here a fonction to read an analog port and compare it to two value. Entrie are the nummer of analog entrie (0..7). The function return 0 if lower than the first value, 1 if between the two and 2 if greater than the second. Comment and variable (...) (26 years ago, 15-Mar-01, to lugnet.robotics.handyboard)
 
  Re: killer mindsorms robots [okay, my bad]
 
You're right, the one I got is 'Extreme Mindstorms' "Killer Mindstorms", "Extreme Mindstorms"...all this hyperbole flying around...I got confused, sorry for any misunderstanding... (URL) it's not bad, and after reading more of it last night, it's (...) (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Sample Code
 
I am a beginner programmer, and I am having a little trouble getting started. I have an analog input that I need to compare to some values stored in memory. If anyone has a similar program that I could reference, I would really appreciate it. Or if (...) (26 years ago, 15-Mar-01, to lugnet.robotics.handyboard)
 
  Re: ROM Firmware size limit? Firmdl bug?
 
(...) Get the latest version of firmdl and/or the latest version of LegOS. (URL) (26 years ago, 15-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: German language Group
 
Hallo Marc, warum nicht ?!? Viele Deutsche mit schlechten englisch Kenntnissen wuerden sich bestimmt freuen. Andererseits teilt man hier seine Ideen mit einer groesseren Gemeinde. (Why not ?!? Many of the germans with bad english knowledge would for (...) (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  German language Group
 
Hi All! Is there any need of a german language based lugnet newsgroup? I think it would be nice, how do YOU think ? Bye, Marc. (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Re: video game type thing...
 
I'll try that. I thought it was something or other like this. I'll post when I'm at least partially successful. (26 years ago, 15-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: killer mindsorms robots [I just got it!]
 
(...) Are you sure it's not called "Extreme Mindstorms"? amazon.com lists some more books to be released: Creative Projects with LEGO Mindstorms by Benjamin Erwin (release 2001-04-06) Joe Nagata's Lego Mindstorms Idea Book by Joe Nagata (release (...) (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Re: video game type thing...
 
Nick, The TOUCH_x macros are boolean - they return true or false. You should be testing if (TOUCH_2) {....} HTH ROSCO (...) (26 years ago, 15-Mar-01, to lugnet.robotics.rcx.legos)
 
  RE: RCX & Cybermaster (VLL comms and MicroScout)
 
Hi Chris, Do a search for "CM-RCX Comm" thread, in lugnet.robotics :) That's (still) my main current project. It works. It's possible to make a CM and a RCX communicate with each other through "eletric" (or light but I didn't test the input through (...) (26 years ago, 15-Mar-01, to lugnet.technic, lugnet.robotics)
 
  Re: killer mindsorms robots [I just got it!]
 
My wife surprised me and actually *went* to my wishlist on amazon, and ordered me 'Killer Mindstorms an Advanced Guide' I'm gonna sit down with it more this weekend, but I already am planning a trip to the local Radio Shack to get parts for the (...) (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Re: Vision Command Nightmare (long post)
 
(...) Nope, it's a genuine Intel Pentium 233 MMX. It was a fresh install of Win98SE too, just to use the box for the webcam. (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Re: Event monitoring
 
(...) You can generate a message internally with InternalMessage(X); but X must be a constant (can't be a variable). I'm not sure if this will trigger the message event - I haven't tried it myself. If it does trigger an event, you could use the (...) (26 years ago, 15-Mar-01, to lugnet.robotics.rcx.nqc)
 
  cannot download RCX Code
 
I just got my RIS last week and I've had a problem getting the IR unit to download RCX code to the RCX unit. I can download Firmware all I want and I downloaded RCX Command Center and tried downloading code from it and had no problems there either. (...) (26 years ago, 14-Mar-01, to lugnet.robotics.rcx)
 
  Re: Vision Command Nightmare (long post)
 
Are you running an AMD Processor on your TX5 ? I found some obscure references that say the logitech software and the LEGO(R) stuff won't run on certain K6's. My K6-300 and my K6-233 do exactly what you describe : ( I took mine to work and it works (...) (26 years ago, 15-Mar-01, to lugnet.robotics)
 
  Re: The Voltage of RCX's output
 
(...) The actual voltage does not change. The perception of different levels of power is achieved by a pulse. At full power there is no pulse, at lower powers, the time between pulses increases. Luis (26 years ago, 14-Mar-01, to lugnet.robotics.rcx)
 
  Re: More juice out of the standard motors.
 
(...) It could be that I am misinterpreting it, but the original post seemed to ask the question "How do you get more power out of the Lego motors?" It was not about gearing or rotation sensors at all. These things are important but the implication (...) (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  Re: BrickBots.Com Contests Extended - Balancing a Pendulum is HARD!
 
Hi Richard, There has been an inverted pendulum balancer done using RCX and legos before. Here is a link to one of these projects (made by the author of the biped1 robot): (...) (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  Re: Vision Command Nightmare (long post)
 
(...) I brought my VC camera into work to use as a webcam last week. I've yet to get it to work. I had it working fine at home on a PII system, but something about this ABIT TX5 board just gives me a black screen. I also tried the "Fix it" button, (...) (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  BrickBots.Com Contests Extended - Balancing a Pendulum is HARD!
 
Hi Folks, I have decided to extend the current contest (Top Spinning and Inverted Pendulum Balancing) at BrickBots.Com for two more weeks. The top spinning contest had one entry during the original timeframe, and a great one at that! You can see (...) (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  seconde serial.
 
I'm do a second serial in handy board. It's possible? If possible what the best port fot this? Port A,B.. How can a write a new interupt vector in IC? I see the 9600 baud out, but i intersting in reciev. Thanks. (26 years ago, 14-Mar-01, to lugnet.robotics.handyboard)
 
  Event monitoring
 
Hi all, I have just switched to NQC 2.3 b1 (from 2.2) to implement the new features of the RCX 2.0. I have used event monitoring to clean up my if/else statements that control outputs. This works fine with all legal event sources, but I use allot of (...) (26 years ago, 14-Mar-01, to lugnet.robotics.rcx.nqc)
 
  Re: More juice out of the standard motors.
 
(...) if there's enough space around you can add the rotation sensor on an auxiliary axle with an 8t gear, and an 24t gear on the direct drive axle. best, yaco\ (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  Re: Help me - Vision command with windows millenium. & another question
 
"Alan Carmack" <amenpage@earthlink.net> wrote in message news:004e01c0a5d6$76...jgb6b01... (...) videos (...) us (...) I use the Windows Movie Maker utility that came with ME, it seems to work OK although there are no format options. I'm looking for (...) (26 years ago, 14-Mar-01, to lugnet.robotics.vc, lugnet.robotics.rcx)
 
  The Voltage of RCX's output
 
Did anyone measure the voltage of RCX/Scout's output for every power level (0-7)? Assume the battery is new in 9v. Zhengrong (26 years ago, 14-Mar-01, to lugnet.robotics.rcx)
 
  Re: Basic Stamp to Handy Board Interfacing
 
(...) This is an update to my previous message. Before I tried to interface the Basic Stamp to the Handy Board I went through the mailing list and found some information on the use of the SPI to interface the HB to other micro controllers. I read (...) (26 years ago, 14-Mar-01, to lugnet.robotics.handyboard)
 
  Re: rotational sensors
 
Fred- We unloaded the last three files that you mentioned, sonar.c, robot221.c, and gp2d02_i.icb, and then tested the Lego Shaft Encoder. This eliminated the problem we were having so we then loaded the files individually and tested. We narrowed the (...) (26 years ago, 14-Mar-01, to lugnet.robotics.handyboard)
 
  Re: Vision Command Nightmare (long post)
 
David (and all), I don't blame lego for the problem. But I have my computer so tweaked (mostly to run varying simulations) that sometimes new software can through it out of wack. Perhaps when I get a new computer I will get VC again (hey Brickbay is (...) (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  Re: More juice out of the standard motors.
 
(...) The original supplicant wanted to use rotation sensors - so I guess direct drive is out. I guess you can use an axle extender and use the sensor as a bearing - but you won't get a very precise position reading if you can only sense position (...) (26 years ago, 14-Mar-01, to lugnet.robotics)
 
  Re: Vision Command Nightmare (long post)
 
"Mike Broam" <cybrid26@hotmail.com> wrote in message news:GA5t9E.68A@lugnet.com... (...) machine ---...---snip---...--- I had no problems with VC at all (great software and camera for the price), two of my buddies bought and installed one, also with (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Vision Command Nightmare (long post)
 
I recently purchased Vision Command from Target.Com. I own an aging machine (p-233, 64 ram, win ME) but one that stil suits my needs. Running Windows ME I thought that using USB devices would be no problem. I went through the install process, and (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  RE: Off topic
 
On the same off topic line. Is there a list for us electronics wanna be’s somewhere? phil -----Original Message----- From: Schaaf John [mailto:JSchaaf@wyseadv.com] Sent: Tuesday, March 13, 2001 2:00 PM To: lego-robotics@crynwr.com Subject: Off topic (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  motor always on ??
 
Hello I've just downloaded the RCX beta SDK and I'm so far in over my head..... I have 2 microscouts, the Fiber optic system, and an RCX now with the new firmware. I've followed links to many GREAT web pages, and also have the Scout PDF, that list (...) (26 years ago, 13-Mar-01, to lugnet.robotics.vll)
 
  Re: Help me - Vision command with windows millenium.
 
Ok thank you That was a bad CDRom and Lego has exchange it. Everything is working fine Bye Damien Duquennoy <dduquenn@club-internet.fr> a écrit dans le message : G9qv6q.2vn@lugnet.com... (...) (26 years ago, 13-Mar-01, to lugnet.robotics.vc, lugnet.robotics.rcx)
 
  Re: More juice out of the standard motors.
 
I think the best solution is to use NO gears. Without the additional friction of the gears and axles through beams, the motors are surprisingly powerful. I have had very good experience with direct drive robots. I suggest that you experiment with (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: video game type thing...
 
I just got new batteries for my RCX, so I just did an actual test. I didn't get very far. I don't believe that it is registering the touch sensors. Here's how I had it: if(TOUCH_2 == 1) { do this and that and that; } What's wrong with it? I should (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  RE: W2K
 
I don't know of anybody who has successfully implemented the mindstorms sw on W2K, I worked at it for a while. I think RCXX Command Center works ok with W2K but can't be absolutely sure about that. phil -----Original Message----- From: Benjamin (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  RE: Lego R/C etc
 
erm... for LEGO purists, there's LEGO #8483 Technic CyberMaster ;) (a pBrick with RF PC control that provides a perfect Lego roverbot chassis) Check (URL) -----Original Message----- (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: video game type thing...
 
Or pid_t pid1 = execi... Philippe (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: video game type thing...
 
(...) Shouldn't (...) No, the returned process id is an integer (int) I believe, you just replace it with int pid1 = execi .... for example :) - Ciaran (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: video game type thing...
 
It probably should. But why does it say that "pid1" is undeclared? Shouldn't that be taken care of in tm.h or unistd.h? (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  Kernel proposal - message passing and signals
 
Hi, I have been poking around in the legOS kernel and it appears that there is no formal way to pass messages between tasks - only shared protected resources through semaphores. I intend to modify the kernel to add the features descried below. Note (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: More juice out of the standard motors.
 
(...) In general terms, worm gears are less efficient than standard gears as they have more inherent friction - essentially, driving a worm gear is like pushing something up an inclined slope. How much this translates into a lego system I have no (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: More juice out of the standard motors.
 
(...) This would cause the weight to go down for acceleration, but then when you turned off the motors, you would coast a shorter distance due to your less inertia. It would depend if you were building a robot for pure acceleration, or not. It would (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: video game type thing...
 
(...) <-- Cut -- > (...) Shouldn't thist say kill(pid1); ? - ciaran (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: sending variables betwen rcx's?
 
Hey, wow. did'nt know some of that. (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.nqc)
 
  Re: video game type thing...
 
I worked on that. I'm having trouble with "execi()" and some stuff related to it. Here's the offending area, but not the entire program: int main(int argc, char **argv) { pid1=execi(&startup, 0, NULL, 1, DEFAULT_STACK_SIZE); MYexit = -1; cputs("x"); (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: sending variables betwen rcx's?
 
My advice would be to try and solve the problem using the regular message facilities (SendMessage(), ClearMessage(), Message()). If you have more than 255 values to convey between the RCX's, then you can try chaining multiple messages together (with (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.nqc)
 
  Re: More juice out of the standard motors.
 
(...) Assuming the robot is being used self-powered (versus with AC adapter), would there be benefit in modifying the RCX to run off a single 9 volt versus all those AA's? That would save quite a bit of weight. :) Doing this wouldn't be "Lego pure" (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: Lego R/C etc
 
WOW ! Sounds like someone answered my prayers. #3 appeals to me. It sounds like just the thing to run the AI on a PC and remotely control the LEGO(R) Chassis. Would it be too much to ask for pics of the prototypes ? -Xanthra47 "John Barnes" (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: Solenoid Pnuematic Valve
 
hey Jeff: Those pictures you sent me a while ago are still on my web site. they are @: (URL) I went and bought 2 of these valves just so I can try to "make" a 4 way valve. I have a crude proto type, and it sort-a fits in a 4x4 lego brick. sorry no (...) (26 years ago, 13-Mar-01, to lugnet.robotics)
 
  Re: sending variables betwen rcx's?
 
Mechanical responce to light stimuli, involving motor ports from the RCX to controll levers ,switches or other motion components. A series of Send and Recive, & Wait times, allow Comand stacks from the sensor watchers to to activate these devices. (...) (26 years ago, 13-Mar-01, to lugnet.robotics.rcx.nqc)
 
  sending variables betwen rcx's?
 
to all i am currently working on a robot with 2 rcx due to the number of sensors i have on the robot. my current problem is that i have 2 light sensor which is conected to seperate rcx. one of the rcx with light sensor is calibrated using some (...) (26 years ago, 12-Mar-01, to lugnet.robotics.rcx.nqc)
 
  Re: video game type thing...
 
(...) No, it will not. Functions don't work like that, in general. If you want to call a function and have it run independently of the calling function, you must use execi() to start it. (26 years ago, 12-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: More juice out of the standard motors.
 
Tricky , Tricky, here's the dilly, 8 to 24 tooth makes the fastest, but low output power, try to find the proper combo so your motors don't work to hard, add a worm gear to hold off the back spin, then try some more gears to get the speed you need, (...) (26 years ago, 12-Mar-01, to lugnet.robotics)
 
  More juice out of the standard motors.
 
Hello I'm trying to make a robot go as fast as possible, but it seems that the power of the engines are stopping me. I own one RIS kit and nothing more. Can i add some more batteries or something? -- Magnus Fasting E-mail: pleboy@online.no Icq: (...) (26 years ago, 12-Mar-01, to lugnet.robotics)
 
  Re: video game type thing...
 
Thanks for the response! Now I'm almost ready to test it. I just need to know if, when you have a call void function, and you then use the int main() to close the program with return 0;, will the void keep running? Here's my current copy, without (...) (26 years ago, 12-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: video game type thing...
 
Thanks for the response! Now I'm almost ready to test it. I just need to know if, when you have a call void function, and you then use the int main() to close the program with return 0;, will the void keep running? Thanks Nick Howell (...) (26 years ago, 12-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: video game type thing...
 
(...) I think you mean if (enemy == 1). Also, the identifier "fight" resolves to the address of the fight function. Doing "fight;" is equivalent to doing "1;". It's legal, but it doesn't accomplish anything. You want to do "fight();" and (...) (26 years ago, 12-Mar-01, to lugnet.robotics.rcx.legos)
 
  video game type thing...
 
I'm building a video game type thing. It has three touch sensors, for left, right, and fire. The LCD controls where the enemy is. I'm having some problems with my code, so here it is(I'm using kernel 0.2.4): #include "conio.h" #include "dmotor.h" (...) (26 years ago, 12-Mar-01, to lugnet.robotics.rcx.legos)
 
  Re: What is an RCX 2.0?
 
(...) These numbers (especially the Free Memory Left) are not significantly different from what I get from my RCX 1.0 brick. Hao-yang Wang (26 years ago, 12-Mar-01, to lugnet.robotics)
 
  Lego R/C etc
 
I'm sorry for the delay in being able to post on this subject. I've been out of town for a couple of weeks, and will be away for a few days this week as well. It's the busy season for me! Here is the current state of the game; I have built a few (...) (26 years ago, 12-Mar-01, to lugnet.robotics)  
 
  Re: Gear Down Robot`
 
(...) Ok, so it's not 8:40 ratiom but you can easily compensate for that. Pictures are at: (URL) also working on a motor control library that combines speed measurement, distance measurement, stall detection and proprotional feedback for control. (...) (26 years ago, 12-Mar-01, to lugnet.robotics)
 
  Re: rotational sensors
 
OK. Try -not-loading the last three of these libs and see if you have any joy. Fred (...) (26 years ago, 12-Mar-01, to lugnet.robotics.handyboard)
 
  Re: rotational sensors
 
Fred- Sorry for the late response as we have not been around for Spring Break, but you requested a list of the files that come up when IC loads: lib_hb.lis, lib_hb.c, lib_hb.icb, libexpbd.icb, expsens.c, expservo.icb, explego.icb, sonar.c, (...) (26 years ago, 12-Mar-01, to lugnet.robotics.handyboard)
 
  Re: serial modem communcation
 
Please see (URL) to see if your modem cable is wired properly. Fred In your message you said: (...) (26 years ago, 12-Mar-01, to lugnet.robotics.handyboard)
 
  Re: Gear Down Robot`
 
(...) I have an MLCad .dat (substructure) file I can send you, or anybody, if wanted. NOt sure of the ratio, though. Might give you ideas though. Send your email address to my email address at ElectroDFW <at> cs <dot> com, with subject: Geartrain. (...) (26 years ago, 12-Mar-01, to lugnet.robotics)
 
  Re: P mode
 
You can download program to micro-scout in this mode by VLL with Scout or RCX. You can find some information in ScoutSDK. Zhengrong (...) (26 years ago, 12-Mar-01, to lugnet.robotics.microscout)
 
  serial modem communcation
 
Hi. Can anyone out there help me! I am trying to hook up my handyboard to a serial modem but it doesn't work. My setup is a cross-serial cable connected to the external serial board of the handyboard. I have tried hooking up the handyboard with the (...) (26 years ago, 5-Oct-00, to lugnet.robotics.handyboard)
 
  Re: What AC adapter to use for RIS 1.0?
 
Hello everyone, I've just signed up to this mailing list and it looks like there's a lot of cool information being passed around here. Anyway, I have an RCX 1.0 with the power jack. Some time ago, I noticed the markings in the plastic above the (...) (26 years ago, 11-Mar-01, to lugnet.robotics)
 
  Controlling over 4 DC motors with handyboard
 
I am a Form 5 student in Hong Kong and my English is not so good...Please forgive me for that... I have bought a handyboard with expansion board. I am going to join a Techno-Pet robot competition. My design consist of 8 DC motors, but the handyboard (...) (26 years ago, 11-Mar-01, to lugnet.robotics.handyboard)
 
  Gear Down Robot`
 
Has anyone created a geared down robot with a gear ratio of 8:40 x 8:40? My original creation is not 'good enough' to go in a straight line and after all the repsonds to my original message I still can not build one. I suck at the building part of (...) (26 years ago, 11-Mar-01, to lugnet.robotics)
 
  New version of NQCEdit
 
The new version is downloadable from (URL) (later this week also from (URL) ) Thanks to all beta testers, especially Mario Ferrari for his load of input to us. What's New?? Improvements in version 1.1 ---...--- * The user can select if the source (...) (26 years ago, 11-Mar-01, to lugnet.robotics.rcx.nqc)
 
  Basic Stamp to Handy Board Interfacing
 
Hello, Has anyone ever interfaced the Stamp to the Handy Board. I am thinking about using the SPI port on the HB to do this. I truly appreciate any assistance. Guillermo (26 years ago, 11-Mar-01, to lugnet.robotics.handyboard)
 
  Re: Robot navigation - barcode stations?
 
(...) Actually, if you are trying this, be aware that LEDs are typically mounted on a panel that faces the user (more or less) and as such the rounded housing of most LEDs acts as a lens which projects most of the light out toward the user rather (...) (26 years ago, 11-Mar-01, to lugnet.robotics.rcx)
 
  Re: Need Decision Help - Buy RIS 1.5 now or 2.0 later
 
(...) Actually, I wouldn't read too much into that. I just received my RIS 1.5 on Friday and it contained and RCX 2.0, but the photos in the manuals and on the box show at least 15 different RCX 1.0's (including 3 with 5 digit serial numbers). I (...) (26 years ago, 11-Mar-01, to lugnet.robotics)
 
  Re: Need Decision Help - Buy RIS 1.5 now or 2.0 later
 
(...) Strictly speaking, there is a difference, physically, between the 1.0 and the 1.5 or 2.0 RCX (I have a 1.0 and a 2.0). The 1.0 has an external power jack. This doesn't effect the physical characteristics of the RCX as far as where and how you (...) (26 years ago, 11-Mar-01, to lugnet.robotics)

Next Page:  5 more | 10 more | 20 more | 100 more
Redisplay Messages:  All | Compact

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR