 | | Re: rcx unit
|
|
(...) Basically yes, but you still need to install RIS 2.0 to your computer in order to download firmware to RCX. After downloading firmware you can drive RCX via remote control unit (...) Nope, as I wrote, you have to install RIS 2.0 first (but no (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Re: rcx unit
|
|
(...) Welcome to the world of LEGO robotics! You don't need to program the RCX to use it with the MindStorms remote, but you do need to download the firmware into the RCX before it will recognize the remote commands. When you first take the RCX out (...) (23 years ago, 17-Nov-03, to lugnet.robotics, FTX)
|
| |
 | | Re: rcx unit
|
|
(...) Definitely not. The signal is transmitted via infrared signals (IR) -- the same way your TV remote communicates with the television. If you cover up the receiver, there is no way to pick up the signal. Also, remember that IR is directed... so (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Re: rcx unit
|
|
(...) The RCX has to have the firmware installed to be able to respond to the remote--out of the box (or sometimes after replacing batteries), there is no firmware installed on the RCX and you have to download it using a PC. The issue of enclosing (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | rcx unit
|
|
I'm new to the RCX Lego world and robotics. Can I use the remote control unit item# 9738 with the Electric Mindstorms RCX unit item # 884 without any computer programming? Will they work together out of the box? Can the RCX unit be completely (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Memory
|
|
I'm using Robolab 2.5 and am running out of containers. I only need about 18 or so states, and I need as many as possible containers. I know in some languages like NQC you can store bits and bytes in containers when you only need a few states, but (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Please help (XP,RIS 2.0 problem)
|
|
(...) I would open the Lego tower control panel applet and see what it has to say about your tower. Also, I would try using NQC directly to see if it behaves any differently with respect to the USB tower. It sounds like a software problem with the (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
(...) Thanks. I hadn't heard that yet and I have to say it is dissapointing, but totally understandable. Jona LEGO Robotics Group of Ann Arbor (URL) (23 years ago, 17-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Please help (XP,RIS 2.0 problem)
|
|
Did you run the ris 2.0? I think you need to do something to setup the tower by running the ris software once. Scott ----- Original Message ----- From: "Rob Hendrix" <rhendrix@cei.net> To: <lego-robotics@crynwr.com> Sent: Sunday, November 16, 2003 (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Please help (XP,RIS 2.0 problem)
|
|
I have installed RIS 2.0 on my new laptop (3 weeks old). I have also installed Bricxcc. I have not installed the Mindstorms SDK 2.0. I have 3 built in USB 2.0 ports (which also run 1.1 USB devices, duh)... Anyway, when I start Mindstorms, I get to (...) (23 years ago, 17-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
(...) Mike Thorn tells us that movies are only available on Brickshelf during low bandwidth hours. I'm working on a website that does not depend on Brickshelf to hold my movies. I hope to have that up in a week. (...) (23 years ago, 17-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
Does anyone know what is going on at BrickShelf with regard to movie files? I sent email to the webmaster but haven't gotten a reply. Jona LEGO Robotics Group of Ann Arbor (URL) (23 years ago, 16-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Remote Camera
|
|
(...) This folder is not yet public. nanobapt (23 years ago, 16-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Remote Camera
|
|
Here is the bricklink url (URL) don't know if they allow avi files on there but I have uploaded one anyway. As for this ebay category number just type in wireless camera into the search. You can normally pick them up really cheap. But they hammer (...) (23 years ago, 16-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Remote Camera
|
|
"mick marriott" <mickmarriott@btinternet.com> wrote in message news:HoEDFD.Ioy@lugnet.com... (...) to the (...) lego (...) remotely. (...) receive (...) solution. (...) So when will you post pictures and more info on the brand and cat# of said (...) (23 years ago, 16-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
(...) As you wish: (URL) Quad242 walking forward. (URL) Quad242 turning left I've got two more but I'm having trouble uploading them.... I'll let you know when I get them uploaded. Kevin (23 years ago, 15-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
(...) Not sure if the part you are looking for is here: (URL) now has the big technic turntable as part of a technic service pack for GBP 8.99 Scott Lyttle (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
(...) Yes that set is great value, especially if its included in the 5/10/15% discount! Good supply of the new double bevel gears, including 36 tooth. Note that the large turntable is black base + trans clear top. ROSCO (23 years ago, 15-Nov-03, to lugnet.robotics)
|
| |
 | | Remote Camera
|
|
I have recently implemented a wireless remote camera for mindstorms. I purchased the camera unit from ebay at a cost of £13 including postage to the UK. I then built a lego casing for it and connected it's power supply to a lego electrical (...) (23 years ago, 15-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
(...) Don't forget the $6 for shipping. I don't think Pitsco ships outside the US... the poster is from the UK. -Rob. (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | RE: Technic Turntables
|
|
Well, that's why I started buying from pldstore.com... I had bought parts on BrickLink and eBay, and then checked out www.pldstore.com's prices.... And I have to say "duh" to me for my earlier blunder, because I bought ten of the things and you'd (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
(...) Hrmm... this is an eye-opener for me. I've been normally picking up spare parts via bricklink, but the _lowest_ price right now on bricklink for these things is $6.22 each, and that's overseas so the shipping would be even more expensive. (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | RE: Technic Turntables
|
|
You're right. My bad..... It's $10.99 for 2... Liz (...) them (...) <lego-robotics@crynwr.com> (...) It's (...) sites (...) sale (...) convenient (...) turntables. (...) (URL) > (...) (URL) > (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | RE: Technic Turntables
|
|
Hello ALL, Actually they are 10.99 for two. (URL) Message----- From: news-gateway@lugnet.com [mailto:news-gateway...ugnet.com] On Behalf Of Liz Bilbro Sent: Friday, November 14, 2003 9:01 AM To: lugnet.robotics@lugnet.com Subject: RE: Technic (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
I think that they're $10.99 for 2, at least they were when I order them about a year ago. Scott ----- Original Message ----- From: "Liz Bilbro" <liz@bookwyrmz.com> To: "'GAIER ADAM'" <M339302@Richmond.ac.uk>; <lego-robotics@crynwr.com> Sent: Friday, (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Bohrok Gears was: Technic Turntables
|
|
(...) Speaking of which, has anyone managed to come up with a good use for those two oddball gear levers in a MOC? I'm referring to the two pieces with partial gears on the ends that originally came in the Bohrok Bionicles. Mark (23 years ago, 14-Nov-03, to lugnet.robotics, lugnet.technic)
|
| |
 | | RE: Technic Turntables
|
|
The easiest place to buy these is from LEGO at www.pldstore.com. It's where I get mine. They've gone up I think; they're $10.99 each. Liz (...) some (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
(...) (URL) so expansive considering the gear collection !!! Philo (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Technic Turntables
|
|
(...) Try BrickLink. Gray turntables are here: (URL) sellers (including me!) ship internationally. I have 6 listed: (URL) Doucette. Falling Bricks (URL) (23 years ago, 14-Nov-03, to lugnet.robotics, lugnet.market.buy-sell-trade)
|
| |
 | | Technic Turntables
|
|
I've been looking for a while and have not been able to find any sites where I can buy Technic Turntables individually. I found one for sale on ebay (for $9) but I need four, and it would be much more convenient if it could be shipped to the UK. I (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
(...) I've added a total of four polarity reversers and now it can walk forward, backward, and turn right and left (within its own footprint)! The transistions from turning to walking and walking to turning involves flipping two of the polarity (...) (23 years ago, 14-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
(...) That happens with large pistons. (...) I knew you would ask :^) (...) So it doesn't tip!?! The center of mass is not always in line with the center of the footprint, so it can tip to one side or the other of the down feet diagonal. Also the (...) (23 years ago, 14-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Pnumatic Grabber arm using Large (48mm) cylinders
|
|
(...) logging machines were inspired by the elephants once used to move logs about, they seem to have similar configuration and work in a similar way. The steering is brilliant, one of the rear axles steers in addition to the model articulating in (...) (23 years ago, 14-Nov-03, to lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Pnumatic Grabber arm using Large (48mm) cylinders
|
|
Here be grabbers: (URL) last two use the small cylinder, but I'm sure you can beef things up a bit and use the big ones. Have fun! :) (23 years ago, 14-Nov-03, to lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Pneumatic Quadraped 242
|
|
(...) Wow, that's massive! And a video of at least one cycle would be helpful :) Why the large footprint? (23 years ago, 14-Nov-03, to lugnet.technic, lugnet.build, lugnet.robotics)
|
| |
 | | Pnumatic Grabber arm using Large (48mm) cylinders
|
|
Hi, i want to build a small pnumatic grabber for a little single rcx robot that i am building. The only problem is, i only have the pnumatic parts from the backhoe and ultimate builders set. I can't seem to come up with a design for a grabber that (...) (23 years ago, 14-Nov-03, to lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Motor Power
|
|
G'day Gahlord, Just outof interest, as an experiment with my science class, we easily towed 30kg (66pounds) on a trolly, using a robot with two motors, 8 tooth gear driving a 40 tooth gear. Traction was the limiting factor, with tyres slipping - the (...) (23 years ago, 14-Nov-03, to lugnet.robotics)
|
| |
 | | Pneumatic Quadraped 242
|
|
Hi All, I just snapped some pictures of my latest MOC. It is a pneumatic quadraped that has an advanced walking gait made completely out of lego pneumatics. Instant walking, just add air pressure. Quad242's front left and back right legs are paired (...) (23 years ago, 13-Nov-03, to lugnet.technic, lugnet.announce.moc, lugnet.build, lugnet.robotics)
|
| |
 | | Re: Motor Power
|
|
(...) And then there was a 48 pound lift: (URL) be more realistic, two 9V geared motors powered by 6AA batteries can provide much mechnical power. It all depends on your gearing and set-up, but I have a 10-pound model that rolls along easily powered (...) (23 years ago, 13-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 4095 Record and Play
|
|
"John Barnes" <barnes@sensors.com> wrote in message news:Ho92G6.170F@lugnet.com... (...) be (...) easier (...) that (...) battery (...) draped (...) standards (...) Sounds like promising news. I'd do almost anything (within reason) to make this (...) (23 years ago, 13-Nov-03, to lugnet.robotics)
|
| |
 | | Re: One Input - Two Outputs?
|
|
(...) The key to making this work is to ensure that there is tension at either end of the run that keeps the worm gear at one end of the axle or the other until it hits a hard stop. For example, my robot arm uses rubber bands to hold the gripper (...) (23 years ago, 13-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: One Input - Two Outputs?
|
|
Hi! Here's something at Brickshelf that might, or might not, be of help: (URL) pretty compact. Although it feels like a dif. and a couple of ratchets would do the same thing (but not what you're looking for). (23 years ago, 13-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: Motor Power
|
|
One of the most import parts of a moco system is how much space the camera needs to cover. They can range from just pan and tilt, commonly called a "hothead" which will either record or playback only rotational data (HPB), all the way up to systems (...) (23 years ago, 13-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Motor Power
|
|
(...) I've built a rudimentary motion control system with Mindstorms, but as the motors are not really steppers, I found I had some precision issues. Pulsing and timing never really got close enough for a repeatable move. You can use rotation (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Motor Power
|
|
(...) Heavens, yes. I haven't done any heavy movement myself, but I've been awed in particular by TJ Avery and Beat Felber: TJ: (URL) Yes, that's a twenty-pound barbell. Beat: (URL) I don't know for sure, but there's gotta be 50 pounds of plastic in (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Motor Power
|
|
Hi all, I'm a lurker/newbie. I'm wanting to build a controlled platform that can move and rotate (sort of like a turtle using LOGO). I'd like this platform to carry my E-10 camera (weighs 37 oz./1048 grams). Can anything using the RCX/mindstorms (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 4095 Record and Play
|
|
(...) Could you tell what the angular resolution of the slotted wheel was? Thanks, Mark (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: One Input - Two Outputs?
|
|
(...) Well, I think this is going to work. Do you have any pictures of the logic/gearing used downline from the transmission? I am concerned with how the worm gear makes the transition from front to back and the resulting interaction with the drive (...) (23 years ago, 12-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: 4095 Record and Play
|
|
To add some further information, I popped the unit open last night and observed that, as I had hoped, mechanically the unit should be capable of operating correctly. Each motor channel has a mouse style slotted wheel and sensor, so the firmware (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: One Input - Two Outputs?
|
|
(...) That's one of the links I was trying to find the other day! Thanks. I'm not sure if it will do what I want, but I'll have to stare at it a while to find out. Keep the ideas coming, if there are more. -Duane (23 years ago, 12-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: One Input - Two Outputs?
|
|
(...) You also might check out a construct called a Directional Transmission. This is a simple setup using a sliding worm gear that does pretty much what you are describing. Michael Powell has a web page describing his design that I used (...) (23 years ago, 12-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: One Input - Two Outputs?
|
|
(...) One way to do that is to have a rubber-band/spring/shock holding "Output B" in it's starting position. Then, you can use a differential to move both A and B. Going forward, A will be easier to drive, so it will push A to it's limit, then B (...) (23 years ago, 12-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: Lego brick Database
|
|
(URL) recommended by peeron.com Features: - Make and save your own inventory list - Combine and save inventory list - Sort parts by Part Number, Description, Color, or Count - View an image of the part (if an image is available) - Compare 2 list to (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | One Input - Two Outputs?
|
|
Has anyone been able to drive two seperate outputs with a single motor? Here's what I'm looking for advice on: Step One: Motor and Outputs A and B are all in their Home position. Step Two: Motor is manually turned on and Output A is driven to it's (...) (23 years ago, 12-Nov-03, to lugnet.technic, lugnet.robotics)
|
| |
 | | Re: Homebrew sensors (where to find them)
|
|
(...) Adding to the links already suggested: - Stef Mientki (URL) Claude Baumann / Boulette's Robotics (URL) Philo (shameless plug!) (URL) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Lego brick Database
|
|
"Jan Spies" <lego-robotics@crynwr.com> wrote in message news:000001c3a91d$ac...@hgfdhg... (...) www.peeron.com/inv Duq (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Homebrew sensors (where to find them)
|
|
(...) Don't forget MindSensors (URL) Robotics Group of Ann Arbor: (URL) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Lego brick Database
|
|
"Jan Spies" <lego-robotics@crynwr.com> wrote in message news:000001c3a91d$ac...@hgfdhg... (...) (URL) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Lego brick Database
|
|
Hi Does anyone know of a stock system which I can use to keep track of my lego bricks? JanS ---...--- Technikon Pretoria ---...--- This email is sent and received in terms of the Electronic Communications Policy of Technikon Pretoria. In line with (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: polish version of mlcad
|
|
DL (URL) (23 years ago, 12-Nov-03, to lugnet.cad.mlcad, lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Alternate IR Comm Setups
|
|
(...) Dustin, I believe that the built-in IR in a laptop uses a different carrier frequency than the 38KHz used by the RCX 1.0. I've seen reports here that the 2.0 RCX can be reconfigured (with some low-level system programming) to use a 76KHz (...) (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Alternate IR Comm Setups
|
|
Has anyone attempted or had any success using the built-in IR ports on laptops to communicate with the RCX? Dustin (23 years ago, 12-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Homebrew sensors (where to find them)
|
|
(...) I have used Pete's stuff. (URL) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Memory Map for the RCX
|
|
(...) Here's a brief summary: 0000-3FFF On-chip ROM 4000-7FFF Unused 8000-EFFF External RAM F000-FB7F External RAM, motor control register (write) FB80-FD7F Reserved FD80-FEFF On-chip RAM FF00-FF7F On-chip RAM (can use 8-bit addressing modes) (...) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mars Rover
|
|
We also had low battery ... on MARS! We beamed one human being to replace them. Then we had the firmware lost. This was a job only for Scotty. Now all seems to work again for three quarters of an hour. Then everything will be shut down until (...) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Memory Map for the RCX
|
|
Hello, Does anyone have a complete memory map for the RCX? Thanks, Rob (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mars Rover
|
|
(...) Taht's a really interesting job !! really great ! nanobapt (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 4095 Record and Play
|
|
I agree too that the record and play unit is not up to the task, even if models look fine and colorful - this is the case of all inventor sets, the shapes and color schemes are really attractive. My expectations were not too high for the control (...) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mars Rover
|
|
wrong link, here the correct one: (URL) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Mars Rover
|
|
Hi all, Have a look at http:\\www_convict.l...s\Main.htm which is a LEGO Mindstorms telerobotics project that we have realized for the Science Festival 2003 (Nov 7th to Nov 16th 2003), the most important science event in Luxembourg-Europe. The (...) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Homebrew sensors (where to find them)
|
|
(...) Here are two links that can be found right on the sidebar of the lugnet.robotics page. Michael Gasperi has done a lot of work in this area: (URL) Stormont also has a page with some very useful information: (URL) are other sites around, but (...) (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: polish version of mlcad
|
|
(...) Doceniam wysilek, dzieki! :) (23 years ago, 11-Nov-03, to lugnet.cad.mlcad, lugnet.robotics, lugnet.technic)
|
| |
 | | Homebrew sensors (where to find them)
|
|
Hi, i am looking for any homebrew sensor links on the Web. Any info would be helpful. -Nick (23 years ago, 11-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 4095 Record and Play
|
|
(...) I couldn't agree more. I was ecstatic when I saw this at the local TRU, so I bought one. Probably bought the FIRST one. The "programmable" brick did NOTHING like I had recorded it to do - time after time. Went too fast, didn't rotate to the (...) (23 years ago, 10-Nov-03, to lugnet.robotics)
|
| |
 | | Re: More Speed? Re: Mindstorms 3.0 Wish List
|
|
(...) OK, that's definitely a good reason to keep things simple. I'm far from convinced that _any_ sensor suite (advanced or not) will completely fix the drift problem, but if the sensors themselves return absolute coordinates (or even absolute (...) (23 years ago, 10-Nov-03, to lugnet.robotics)
|
| |
 | | 4095 Record and Play
|
|
I had to buy this set just to see. Total disappointment :( Nice idea, dreadful implementation. The motor/battery box clearly tries to record the rotation of each of two wheels in "record" mode, and I think it actually manages to do that part ok. The (...) (23 years ago, 10-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?
|
|
(...) I tried to do that, without success... it would be nice if someone else could try, I may have missed something ! BTW, NQC contains functions to send multibyte serial data, but none (except the single byte "Message()" function) to receive them. (...) (23 years ago, 8-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Biggest lego wheel?
|
|
(...) You're talking about a tri-star wheel. Here's but one thread on the topic: (URL) (23 years ago, 8-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?
|
|
(...) I wonder if the RCX 2.0 to RCX 2.0 range would improve if you changed to a 76KHz carrier. (23 years ago, 8-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Biggest lego wheel?
|
|
if the goal is to climb stairs, i remember seeing some designs that manage to function like larger wheels than they are. i can't find the links, maybe someone remembers where. was it lobster bot or something like that ? it used canterlever arms or (...) (23 years ago, 8-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mindstorms 3.0 Wish List
|
|
(...) How about doing what TI does with their graphics calculators instead... use small watch batteries to backup the memory (with a tiny inset button to reset). Michael ___...___ MSN Messenger with backgrounds, emoticons and more. (URL) (23 years ago, 8-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?
|
|
(...) Yes RCX 2.0 can communicate with spybot if you use "extra-soft" but not with RIS soft. RCX 2.0 does not work well with IR remote, you have to be exactly in front of the RCX 's IR port to pilot it. So you can' t pilot easily RCX2.0 vehicle with (...) (23 years ago, 8-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Biggest lego wheel?
|
|
"Mike Reddy" <mreddy@glam.ac.uk> wrote in message news:Hnz8uz.1yxp@lugnet.com... (...) students (...) The hailfire droid wheel is the biggest, but impossible to use. After that the balloon tyres from 8466/8457 are the largest. ((URL) and goes on (...) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Biggest lego wheel?
|
|
(...) I think we can be a little more specific here: Besides the Hailfire droid wheel Philippe Hurbain mentioned in his post, here are 3 more Peeron references to large wheels. If you follow the links, you will also see a list of what sets each one (...) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | polish version of mlcad
|
|
hi i just finished polish version of mclcad language pack i know there is not much polish members here but i just wanted to announce it :))) i hope michael will set this langpack on his site br pixel (23 years ago, 7-Nov-03, to lugnet.cad.mlcad, lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Biggest lego wheel?
|
|
(...) Not really easy to use... but by far the biggest: Hailfire droid wheel ( (URL) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?
|
|
(...) I don't think there is an RCX 1.5, there are different RCX 1.0 from RIS 1.0 (with AC-adapter) and from RIS 1.5 (without, I have two). As far as I understand (I have no first-hand experience) the only practical difference is that the RCX 2.0 IR (...) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | replacement for RCX 2.0
|
|
Hi ! As you possibly remember, I have asked you several questions concerning the modification of the serial speed of the RCX. I tried quite hard to change the speed to about 19,2 kb/s, but excactly nothing has changed so far. So I gave up working (...) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Biggest lego wheel?
|
|
If you are happy for "baloon" wheels, try the sheels from the 8466 4x4 off-roader, they are pretty big. Or you could try wheels from the Silver Champion/Williams F1 (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Biggest lego wheel?
|
|
What is the biggest lego technic wheel currently available? I have some students building a stair climber and they want to use BIG wheels in their design. (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mindstorms 3.0 Wish List
|
|
(...) ...and make sure that you don't accidentally hit the ON button while a battery is removed, as it would mean instantaneous memory erase! Philo (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?
|
|
(...) The only difference between a 1.5 and a 2.0 RCX is the sticker that says "2.0". Only the 1.0 RCX is a little different (it has an external power socket). However, there are lots of differences between the RIS 1.5 and RIS 2.0 sets (the (...) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mindstorms 3.0 Wish List
|
|
(...) The one thing I would say about this is that anyone who has ever tried to write replacement firmware, or who has programmed in BrickOS/LegOS has encountered situations where the RCX has become completely locked up due to a programming error. (...) (23 years ago, 7-Nov-03, to lugnet.robotics)
|
| |
 | | Re: RCX questions
|
|
Look here: (URL) Jürgen Stuber <stuber@loria.fr> (URL) rot 13 "fr" "se" (23 years ago, 6-Nov-03, to lugnet.robotics)
|
| |
 | | Re: More Speed? Re: Mindstorms 3.0 Wish List
|
|
(...) Lejos is notoriously short on memory, with a half decent communication stack the RCX is full. In general I'd say with more memory and speed you can program more "high-level", and build more intelligent robots. As for a new RCX version I'd say (...) (23 years ago, 6-Nov-03, to lugnet.robotics)
|
| |
 | | Re: Mindstorms 3.0 Wish List
|
|
External power Flash memory (no more losing the firmware and programming when power is removed or batteries die) An extensible 2-wire sensor bus allowing up to about 16 sensors attached to just one port on the RCX (freeing up 2 port locations) A (...) (23 years ago, 6-Nov-03, to lugnet.robotics, FTX)
|
| |
 | | Re: More Speed? Re: Mindstorms 3.0 Wish List
|
|
(...) Ah hah! And the reason I don't want to waste time and effort making my memory map (excuse the pun) any harder to code than it has to be is because I am busy building special sensors and other gizmos to solve the short range navigation and (...) (23 years ago, 6-Nov-03, to lugnet.robotics, FTX)
|
| |
 | | 9747 (RIS 1.5) comes with 2.0 RCX brick?!?
|
|
Hello, I opened a new 9747 (RIS 1.5) today and was slightly surprised to find a 2.0 RCX brick inside. Has anyone any clue how this can be? Kind regards, Wessel ...who wished they'd accidentaly put the USB tower in instead of the serial but alas. (23 years ago, 6-Nov-03, to lugnet.robotics)
|
| |
 | | Re: RCX questions
|
|
maybe this help (URL) Wilson" <jonwil@tpgi.com.au> wrote in message news:HnwoB5.EEM@lugnet.com... (...) (23 years ago, 6-Nov-03, to lugnet.robotics)
|
| |
 | | Re: RIS 2.0 USB Tower on a Mac
|
|
(...) As long as you are using OS X you'll be fine. NQC includes its own driver code for working with the USB tower under OS X. For Mac OS 9.x you'll need to install a driver from Lego. You'll also need to download firmware to the RCX. MacNQC can (...) (23 years ago, 6-Nov-03, to lugnet.robotics)
|