To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.roboticsOpen lugnet.robotics in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Robotics / *23669 (-100)
  Can anyone help identify a tyre?
 
There is a large rubber tyre about 1 3/4 inches diameter which comes with the Mindstorms stuff. Its a solid tyre and even though there's a lot of rubber, it's is fairly narrow and fits on the small sized yellow hubs. What I want to know is if there (...) (26 years ago, 18-Sep-00, to lugnet.robotics)
 
  Re: Making temporary lines on floors
 
there is that blue "painters tape" its designed to come off of painted surfaces without leaving a residue the downside is that ive only seen it in blue. b ---...--- (...) (26 years ago, 18-Sep-00, to lugnet.robotics)
 
  Making temporary lines on floors
 
Are there any good ways to produce TEMPORARY markings on large areas of floor surface (mainly carpet, some linoleum) suitable for line following robots, etc.? Someone suggested masking tape, but that wouldn't be good for long term usage (leaves (...) (26 years ago, 18-Sep-00, to lugnet.robotics)
 
  Hall Effect
 
You are going to find that it is not the encoders as I thought also. The HB seems to be incapable of reading correctly. I don't know why, but I have been trying for about 3 months with no/or little success. Someone knows, but no one is telling. I (...) (26 years ago, 18-Sep-00, to lugnet.robotics.handyboard)
 
  Re: Purchasing RCX...Which Version?
 
Neither the Cybermaster box or the unit itself shows any evidence of the unit having FCC approvals. Unless they change this, which I doubt because it's an older product, I don't think it will ever be officially available in the US. Randall (...) (26 years ago, 18-Sep-00, to lugnet.robotics)
 
  Re: Purchasing RCX...Which Version?
 
Eric, I've noticed that some of the TRUs around here (Cleveland, Ohio) still have both versions on their shelf, and the 1.0 has a big sticker on it saying that you can get the software upgrade free. The main difference is that 1.0 has the power (...) (26 years ago, 18-Sep-00, to lugnet.robotics, lugnet.market.shopping)
 
  Re: Purchasing RCX...Which Version?
 
You can get 1.0 and 1.5 systems on ebay, but there is some risk and the prices are amazingly high (80-95% of retail). There is not that much difference between the 1.0 and 1.5 kits, and I recommend the latest release, because half of it is a (...) (26 years ago, 18-Sep-00, to lugnet.robotics, lugnet.market.shopping)
 
  Re: Purchasing RCX...Which Version?
 
I think I can answer all of these. I'll make down what I'm not certain about, and my fellow list members can correct me as need be. 1. The only significant difference between the 1.0 and the 1.5 is the AC port, which the 1.0 has, but the 1.5 lacks. (...) (26 years ago, 18-Sep-00, to lugnet.robotics)
 
  HomeBrew Rotation Sensor
 
Hello I recently built the sensor defined here (URL) used an emitter detector pair out of a mouse and built the circuit as defined, with the exception of using a 22uF capacitor instead of a 25uF capacitor. Will this reduce the effectiveness of this (...) (26 years ago, 18-Sep-00, to lugnet.robotics.rcx)
 
  Re: Purchasing RCX...Which Version?
 
I have a similar question to Tim's. I'm finally gonna buy a Mindstorm's Invention Kit. Is it possible to find 1.0 RCX still? Where can the best deals on Invention Systems be found? thanx, eric (...) (26 years ago, 18-Sep-00, to lugnet.robotics, lugnet.market.shopping)
 
  Purchasing RCX...Which Version?
 
Hello, Everyone: I'm interested in purchasing an RCX, but from what I've read the 1.0 is a lot better than the 1.5 (and since they're still giving the upgrade kits free, what's the difference?). Can anyone explain the differences between the 1.0 and (...) (26 years ago, 17-Sep-00, to lugnet.robotics)
 
  Re: Solenoid Pneumatic Valve
 
(...) (URL) Now all I need is the reduction valve. regards. John (26 years ago, 17-Sep-00, to lugnet.robotics)
 
  Solenoid Pneumatic Valve
 
Hi Everyone: Chris Mango has put a couple of pictures on his web site if anyone is interested in seeing the teeny valve assembly. Thanks Chris. (URL) additional information for those who are curious....It's from a Parker Hannifin division called (...) (26 years ago, 17-Sep-00, to lugnet.robotics)
 
  Sonar and Compass together on expansion board.
 
I am working in adapting a PNI compass to the handyboard. And I have a 6500 sonar board connected to the expansion board, here's my idea: Use a Lithium 3.6V battery to save calibration settings after poweroff M/S is jumper selectable Calibrate is (...) (26 years ago, 17-Sep-00, to lugnet.robotics.handyboard)
 
  spirit.ocx
 
Where can I download spirit.ocx ? (I have Lego Robolab and spirit.ocx is not on CD with software). Zdenek Chmelar (26 years ago, 16-Sep-00, to lugnet.robotics.rcx)
 
  [ANN] TinyVM 0.2.2 with auto-power-off
 
The latest release's firmware shuts the RCX off if it's idle in program download mode for more than 8 minutes. If you have a program running indefinitely, though, batteries will still run out. Also, TinyVM 0.2.2 should work on CygWin 1.1.x, unlike (...) (26 years ago, 16-Sep-00, to lugnet.robotics.rcx.java)
 
  Re: Two original Technic creations
 
This is exactly the reaction I would have written! Keep on building! Klaas from Holland ---...--- Sean Kelly schreef: (...) (26 years ago, 16-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Re: My simple pneumatic switch
 
(...) Well, I came up with a simple design for a pneumatic switch: (URL) (26 years ago, 16-Sep-00, to lugnet.robotics)
 
  Re: My simple pneumatic switch
 
Remember that this holds most of the pneumatic stuff that does not move. If you only need one switch, then IMHO it is a very good switch/base. For more switches though, it could get a tad bulky. Andy (...) (26 years ago, 15-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Ok, here is the scoop. I've done the following tests... Installed Red Hat 6.2 Both rpm's worked just fine. (pre compiled & source) Installed Mandrake 7.1 as a 'Developer' (w/ Extension CD) Pre Compiled rpm failed. Same error. Compiled rpm (...) (26 years ago, 15-Sep-00, to lugnet.off-topic.geek, lugnet.robotics.rcx.nqc)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) [ -> followup-top .off-topic.geek ] (26 years ago, 15-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) If you can get me an account on a Mandrake box, I'll build an RPM for you and put it on my page. (26 years ago, 15-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Pcode benchmark
 
The pcode includes a benchmark primitive to see how well the multitasking environment is functioning. Does anyone know how to access this function? George Musser georgejr@musser.com Share information about yourself, create your own public profile at (...) (26 years ago, 15-Sep-00, to lugnet.robotics.handyboard)
 
  Re: My simple pneumatic switch
 
(...) What a horrific amount of work to get ONE switch to 'switch'. Ugg... I think I'll have to look into them Fishertecnic electronic ones. Anyone have an update? Good job though, it does look robust and reliable. Dean -- Coin-Op's For Sale!: (URL) (...) (26 years ago, 15-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Not after doing an upgrade, but I'd mucked so much around with the system I think I corrupted it. I downloaded and installed Red Hat 6.2 and the pre-compiled version ran. I haven't tried the source compile yet. (I can't get the ftp, telnet & x (...) (26 years ago, 15-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Communication Protocol
 
Hi everyone, I'm working on a project that implies the communication of the Handy-Board with a PC computer via the serial port. The person who is in charge of programming the software that will run on the PC asked me what is the communication (...) (26 years ago, 15-Sep-00, to lugnet.robotics.handyboard)
 
  Re: Plano 1258 storage for Classroom Robotics
 
Howdy, ...very nice! I still like my school's design with a mobile cart and removeable tubbies for the majority of parts. ( Take a look at (URL) for an example ). There are so many Lego elements in our labs, the stowaway boxes can become difficult (...) (26 years ago, 15-Sep-00, to lugnet.storage, lugnet.robotics.edu, lugnet.edu)
 
  Re: Easy Telerobotics, no programming needed!
 
That Math.random is a hack to fool JavaScript into sending messages to WebBrick. Here is how the JavaScript works: First, I make a fake image variable "dummy." When you push a button, JavaScript is given the command to load the image with the image (...) (26 years ago, 15-Sep-00, to lugnet.robotics.tele)
 
  Re: Old & New Motors: work output comparison???
 
(...) There is a good page about this here: (URL) his tests found that the the new 9V geared motor provides at least twice as much torque at a similar RPM. In practice, some pretty amazing torque can be obtained with either, and sometimes I favour (...) (26 years ago, 15-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Old & New Motors: work output comparison???
 
It's CRANE TIME ast Elwood & Bubbas' workshop. After a two year - hiatus, E & B are back at the drawing board, hard at work on their biggest crane ever. My quest is for performance measures of the old & new Lego motors: which one produces more work (...) (26 years ago, 15-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Solenoid Pnuematic Valve
 
I have finally found a tiny solenoid valve for use with the RCX. It fits into a 2x4 stud brick, and runs off one of the motor outputs. All I had to add was a resistor, a zener (the valve runs on 3 VDC), and a diode (reverse voltage stop). It's (...) (26 years ago, 15-Sep-00, to lugnet.robotics)
 
  Details of pneumatic stuff inside Otto
 
(...) Kevin and others asked for some more details about the pneumatic devices inside my robot Otto. I just put some more pics on the page, hope they help: (URL) (26 years ago, 15-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) So Dean, does the package rebuild after installing this? (26 years ago, 15-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: Easy Telerobotics, no programming needed!
 
That's a pretty slick program. It has a clean interface. What did you write it in? VB ? I imagine I can use the camera from Vision Command as a web cam. Unfortunately I don't know anything about web cam's as far as software goes. Can you point me in (...) (26 years ago, 15-Sep-00, to lugnet.robotics.tele)
 
  Easy Telerobotics, no programming needed!
 
WebBrick is a free program that lets you connect your Lego Mindstorm's robot to a web-page user interface. When anyone on the internet connects to your web page, they can press buttons on the page that activate your robot. There are 6 buttons you (...) (26 years ago, 15-Sep-00, to lugnet.robotics.tele)  
 
  Re: My simple pneumatic switch
 
Looks good. Thanks for sharing. Ryan -- reply to: rjschave at home dot com (URL) <lego-robotics@crynwr.com> wrote in message news:B5E5F934.3FF1%a...one.net... (...) obvious (...) (26 years ago, 15-Sep-00, to lugnet.robotics)
 
  Announcing new set database
 
LUGNET is pleased to announce a new and improved LEGO set database: (URL) over the previous database include: New Display Options Chose compact lists, thumbnails, or fully-detailed pages to browse through. Smarter Searches Display any range of set (...) (26 years ago, 15-Sep-00, to lugnet.admin.database, lugnet.general, lugnet.cad, lugnet.robotics, lugnet.market.shopping, lugnet.announce) !! 
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Wonderful. Which means it's in the "RPMS2" directories on FTP mirrors, which I didn't think to look in. So, there's the answer! (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Lego Lingo
 
Hi, I saw a message a few days ago asking about Director. I would be most interested to know if you could use Lego with Director as well. I am currently playing around with the Handy Board for the sole reason that I don't think I can use Lingo with (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) *Open mouth* *Insert foot* *Recheck CDs* ht@katzenminze%pts/2 (21:01) ~ > rpm -qf /usr/include/g++-3/vector.h libstdc++-devel-2.95.2-7mdk ht@katzenminze%pts/2 (21:01) ~ > l1 /misc/cd/Mandrake/RPMS/libstd* /misc/cd/Mandrake/RP...k.i586.rpm (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Ultimate Robotics Storage
 
For those of you who are interested, I've got a photo up of my Plano 758 box up. (URL) Wilcox Senior Web Developer iMcKesson Provider Solutions Group-Needham 160 Gould Street, Suite 130 Needham, MA 02494-2308 Phone: 781.453.2900 x 237 Fax: (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Styling Pack
 
I got a couple of the power packs. One color theme of the styling pack is silver. The big panels are silver and so are the flexible rods and most of the flexible tubes. The flexible rods are no good for drive shafts, they twist too easily. The rods (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: C/C++/ActiveX interface to Quickcam or Vision Command??
 
YES. Take a lot at VideoServer. It is a very simple interface to access any camera from windows to do any image processing. Here is the link (and it is free for non-commerical use): (URL) Original Message ----- From: "Amos" <amos@ite.his.se> To: (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: sound design (Re: 2nd RCX AND PNEUMATICS)
 
(...) Yup. You really have to use a belt somewhere in the drive train with these motors, which allows it to slip instead of jamming. (...) I'd tend to agree, although they can be useful in functional applications if you are very careful. Sometimes I (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) But that's not libstdc++-devel... (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Fresh install. To be sure, the package is right on the primary "install" CD: ht@katzenminze%pts/2 (17:54) ~ > ll /misc/cd/Mandrake/RPMS/libstd* /misc/cd/Mandrake/RP...k.i586.rpm I used the official ISO images from Mandrake. Regards, Hakan (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: Two original Technic creations
 
(...) Thanks - I did things this way simply because I too love reading such material, not just about Lego but on many technical subjects. Looking forward to checking out your Robot Diaries ASAP. Jennifer Clark (26 years ago, 14-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) (See my previous message.) Weird. I wonder why that package is missing from the mirrors? (Metalab, for example, and rpmfind.net). Was your 7.1 system installed fresh, or upgraded from an earlier install? (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Ok, did some poking around. In Red Hat 6.2 and in Mandrake 6.1, vector.h is part of "egcs-c++". With Red Hat 7.0 beta, vector.h is part of "libstdc++-devel". I looked on a Mandrake 7.1 mirror and could find neither package. However, I checked (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  FA: gears, Intelligent House (2 micromotors), Duplo and more
 
I have a bunch of LEGO auctions up now with lots including all different types of gears, 2 Intelligent House sets (w/light sensor and 2 micromotors), Duplo Toolo and Early Simple Machines, and more. Thanks for the read Ebay username - SaraJoey (URL) (26 years ago, 14-Sep-00, to lugnet.market.auction, lugnet.robotics)
 
  IR transmission
 
What value resistor should I put in series with the IR led for transmitting from the hb ?. The red led that is present as an indicator is rated for about 5mA (I think they normally run at about 2-3mA) using a 1K resistor (R5) so should I run the IR (...) (26 years ago, 14-Sep-00, to lugnet.robotics.handyboard)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) On *my* system (relatively stock Mandrake-7.1), vector.h comes with the libstdc++-devel package. ht@katzenminze%pts/2 (13:01) ~ > locate vector.h /usr/include/g++-3/bvector.h /usr/include/g++-3/vector.h /usr/include/g++-3/s..._bvector.h (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) [snipped the rest] All the rest is a follow-up to the fact that vector.h is missing. As root, do "updatedb" followed by "locate vector.h" If it doesn't return anything, you need to install the egcs-c++ rpm, which is under (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: My first Lego robotics competition
 
(...) If you have the Cybermaster touch sensors, you can multiplex all three on a port, see (URL) . Use a task to look at the raw values and decode which sensors are pressed, e.g. in NQC: #define TOUCH_SENSOR SENSOR_1 int touch_sensor_state; #define (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  C/C++/ActiveX interface to Quickcam or Vision Command??
 
Does there exist a C/C++/ActiveX programming interface (custom-built or supplied by the companies) that allows a user to control and process the image captured from Quickcam or Vision Command, preferrably under Visual C++ environment?? (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  sound design (Re: 2nd RCX AND PNEUMATICS)
 
(...) Yes, my two also emit a rather unpleasant high-pitched sound. Personally, I tend to always use gear motors. In the beginning I used a minimotor for steering a robot, but it was very slow and jammed often. I'd say they are better for rotating (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  My simple pneumatic switch
 
Since this topic has come up, I would like to share my simple pneumatic switch design. It's robust, it works great, and it should be fairly obvious from the picture and description provided in the link below how it works. (URL) (26 years ago, 14-Sep-00, to lugnet.robotics)  
 
  Re: 2nd RCX AND PNEUMATICS
 
(...) Speaking of rattling, I recently bought the little red servo motor and that blasted thing is *loud*! Is this normal or did I get a bad model with a flaw? (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: connectivity for Windows CE
 
Ted Hess sent me a compilation of NQCCE V2.1r2 for windows CE, i have not been able to test it yet. Let me know if you need it.(It's for SH3) I have more need of controling the Control Lab for Dacta, then the RCX at the moment... /J "mike fusion" (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx)
 
  RE: good sets?
 
(...) I think it´s running out so get it while you can! ;) The catalogue inside was from 98, in the 2000 catalogue it´s only very small and not featured at all and in the online catalogue I can´t even find it. Now that I´ve assembled it I must say (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) The compiler can't find "vector.h" - which will cause lots of problems because without vector.h, all of the instantiations of the vector template won't make syntactic sense (leading to lots of random syntax errors later on in Scope.h and (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Converting the (MS)2 from 6 to 10 outputs... Aide?
 
I've been thinking of upgrading my (MS)2 Expander from it's current 6 ports to 10 ports. For those of you that aren't familiar with the (MS)2 Expander you can look here: (URL) the (MS)2 gives you two banks of 3 outputs. Each bank is independent and (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: buy single pneumatics, sensors, gears, etc
 
(...) Be aware though that some of the prices for "spare parts" are not as good as their service pack counterparts, and the Dacta "kits" are fantastically overpriced. This is especially true of anything electric. You definitely want to wait until (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: buy single pneumatics, sensors, gears, etc
 
(...) Just a small warning: if your surfin' the site and come across this (URL) link - sorry) It is #9290 Thematic Builder Set. Don't get too excited - they are out :-( Julie (26 years ago, 14-Sep-00, to lugnet.technic, lugnet.robotics, lugnet.robotics.rcx)
 
  Re: buy single pneumatics, sensors, gears, etc
 
(...) (i.e., pld = _P_itsco _L_EGO _D_ACTA). The site used to be called www.pitsco-legodacta.com or some equally ungodly long name like that. :) --Todd (26 years ago, 14-Sep-00, to lugnet.technic, lugnet.robotics, lugnet.robotics.rcx)
 
  Got some code for you: Sonar on handy in feet & inches!
 
Hi, I wanted to see how to convert the sonar hits into feet in inches. Well as the textbook rule goes it looke like it takes 333.333 ticks = 1 inch round trip. Since the timer is running 2,000,000 counts per second. But in real life I had to fudge (...) (26 years ago, 14-Sep-00, to lugnet.robotics.handyboard)
 
  re: connectivity for Windows CE
 
"> (...) i have a version of NQC for WinCe but i forgot who i got it from. ithe readme includes a small hack for using the rf tower directly from your device. if you would like me to e-mail it to you reply to mikefusion@hotmail.com or (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) After installing the bison package from the Ret Hat 6.1 CD I now get the following. Even MORE errors then before... [root@linux SPECS]# rpm -bb nqc.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.26034 + umask 022 + cd /usr/src/RPM/BUILD + (...) (26 years ago, 14-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Re: My first Lego robotics competition
 
Here you go...One of the robotics questions I actually CAN answer! Just go to the sight I've copied and pasted below: (URL) thanks to Michael Gasperi for that great site. And ditto for all who make Lego robots fun! Rob H. (...) (26 years ago, 14-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Yep. Install the bison package. :) This is one of my gripes with mandrake, by the way. Their install program makes it very easy to not install stuff which you will actually want. (26 years ago, 13-Sep-00, to lugnet.robotics.rcx.nqc)
 
  My first Lego robotics competition
 
Hello, I am soon going to enter my first Lego Robotics competition, and I would like some help. I guess there is no better place to go for Lego wisdom than Lugnet! I am looking for a clear explanation of how to multiplex sensors. I would like to (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Re: Buying the sets
 
Christopher J Alexander (02:20 PM 09.13.2000) wrote: >I live in the UK and want to buy the Mindstorms set. I thought I had ordered >it but ended up with the Scout which I am now having to return. I want the >proper one (the name of which I have (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Buying the sets
 
Hello I live in the UK and want to buy the Mindstorms set. I thought I had ordered it but ended up with the Scout which I am now having to return. I want the proper one (the name of which I have forgotton) but cannot find it anywhere. Can anyone (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Re: 2nd RCX AND PNEUMATICS
 
(...) Hmm...I imagine the nature of pnuematics would make precision movement control challenging, to say the least. Hey LEGO! We want hydraulics next. :) Greg Betzel (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Hall Effect Encoder = sloppy, going optical
 
Well the Quad hall effect switch encoder does not give repeable resolution. If I say 14 ticks = right turn (motors going in opposite direction) well. sometime it is on the money, sometime it's not. And I don't have a racer.. I have it running slow (...) (26 years ago, 13-Sep-00, to lugnet.robotics.handyboard)
 
  Re: Rover based on Hanyboard is evolving well!
 
Sure.. hey I thought I replied to the list. Here's the picture so far.. note: lugenet doesn't allow jpeg attachments so You will get the image, lugenet will reject them. I am hoping to put up a webpage soon. I've got a few sensors I am designing (...) (26 years ago, 13-Sep-00, to lugnet.robotics.handyboard)
 
  buy single pneumatics, sensors, gears, etc
 
here's a link where you can buy, among other things, pneumatics singly, sensors, and lots of other cool technic stuff (URL) (26 years ago, 13-Sep-00, to lugnet.technic, lugnet.robotics, lugnet.robotics.rcx)
 
  **cant use 100 step mtr prgrm wth...
 
Hi, I am trying to use the 100 step motor code and a Hb expansion board. I can get either one of them to work ALONE ONLY. So I can only use the expansion board. OR the 100 step pcode, How do I install both so they dont conflict with one another. (...) (26 years ago, 13-Sep-00, to lugnet.robotics.handyboard)
 
  Re: 2nd RCX AND PNEUMATICS
 
(...) Another nice thing about the belts is that they don't rattle like the gears, in particular when you change direction often. Jürgen (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  RE: good sets?
 
I had the same problem with the main model for the BarCode Multi-Set. I couldn't bear to disassemble it! Doug Wilcox Senior Web Developer iMcKesson Provider Solutions Group-Needham 160 Gould Street, Suite 130 Needham, MA 02494-2308 Phone: (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Re: good sets?
 
I had one problem with the Tow Truck I bought for parts, I could not scrap it! It is too nifty. It is on the shelf in a safe place waiting for a chance to build it as it was meant to be. This is the first Lego I have bought for parts that looks so (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  RE: Two original Technic creations
 
Great site, and absolutely wonderful models. ::: sets fire to his own Lego collection and vows to go back to DUPLO ::: I love the numerous photographs detailing the assemblies, and the narrative text is interesting. I love reading about the process (...) (26 years ago, 13-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Re: Two original Technic creations
 
(...) Absolutely wonderful! Reier (26 years ago, 13-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Re: Two original Technic creations
 
(...) I think you ought to take over set design at the LEGO Group! Jennifer, these are beautiful models, beautifully described and depicted and cleverly constructed. Thanks for taking the time to not just construct, but thoroughly describe your (...) (26 years ago, 13-Sep-00, to lugnet.technic, lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Ok, I did as above and here is what I got along with an error message. [root@linux SPECS]# rpm -bb nqc.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.29920 + umask 022 + cd /usr/src/RPM/BUILD + cd /usr/src/RPM/BUILD + rm -rf nqc-2.2.r1 + (...) (26 years ago, 13-Sep-00, to lugnet.robotics.rcx.nqc)
 
  C++
 
Has anyone been able to import the spirit.ocx file into borland builder 4 or 5? | i tried it with 5 but when i went to compile the component, i got some errors... | thanks for your help, | josh (26 years ago, 13-Sep-00, to lugnet.robotics.rcx)
 
  Two original Technic creations
 
Hi folks, I've just put a new website online with a couple of my recent Technic creations, a "technic figure scale" skid steer loader and a mobile crane. The loader is fully operated by pneumatics and motors, and the crane by motors. I've put a lot (...) (26 years ago, 13-Sep-00, to lugnet.announce, lugnet.technic, lugnet.robotics, lugnet.build) !! 
 
  RE: good sets?
 
This sounds excellent, they had a sellout of the 8462 for $55.5, I bought 2 (12 wheels!). I'm in need of 'basic' Technics pices (beams and axels) the wheels are pretty cool looking too and I have no pneumatics today. They also had theese set for a (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Re: 2nd RCX AND PNEUMATICS
 
(...) This generally not a problem with the motors, which can generate surprising amounts of torque particularly if geared down a lot. Rather, it is to do with the drive train tearing itself apart precisely because of this torque. You need to brace (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  RE: good sets?
 
I was going to recommend that tow truck set as well, but wasn't sure of its availability. Doug Wilcox Senior Web Developer iMcKesson Provider Solutions Group-Needham 160 Gould Street, Suite 130 Needham, MA 02494-2308 Phone: 781.453.2900 x 237 Fax: (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Ok, well. In that case, let's assume that you have the compilers installed properly by now. :) Have you tried rebuilding the RPM? Download (URL), and install it as you would a binary RPM. Then look in /usr/src/RPM/SPECS/ and do "rpm -bb (...) (26 years ago, 13-Sep-00, to lugnet.robotics.rcx.nqc)
 
  Problems with microprocesseurs
 
Hello, I work with a Handy Board and an other board based on 68hc11E2. The first is master and the second is slave. The SPI communication is OK between 2 boards. The first send the position of servos to the second. At the start, all is OK. After 2 (...) (26 years ago, 13-Sep-00, to lugnet.robotics.handyboard)
 
  Re: Rover based on Hanyboard is evolving well!
 
Hi You can only run the counter 4x slower as now. But in this case, the complete HB works 4x times slower, so this isn't a usefull solution. The other possibility is the use the overflow flag and integers. I didn't solve that problem. For more (...) (26 years ago, 13-Sep-00, to lugnet.robotics.handyboard)
 
  Re: good sets?
 
(...) I recently bought a sort of towing truck with pneumatics (8462 I think) which is available here in Germany in every toy store, don´t know about the US, it´s not listed in the online catalogue but then again you can find hardly anything there. (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Lego robotics + macromedia director, possible?
 
I am wondering if anyone has attempted to interface either the RCX or the Dacta Control Lab serial box to macromedia director. I work for a company that designs science museum exhibits, and I think there are some neat things that could be done with (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) I've just spent hours pouring though the RPM's installing anything to do with c++, c, gcc and egcs... But I still get the below error... nqc: error in loading shared libraries: nqc: undefined symbol: _t24__default_alloc_....free_list I'm at (...) (26 years ago, 13-Sep-00, to lugnet.robotics.rcx.nqc)
 
  2nd RCX AND PNEUMATICS
 
Hello Everyone 1) Ive got The lego mindstorms VER 1 and want to get a second RCX , now available is the rcx v1.5 , can i use it with my lego ver 1 cd will it cominucate with the Rcx 1.5 , will there be any error in communicating with one another as (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Mindstorms vision command, focus and price question
 
howdy, I'm about to get one...How much resistance is there in the turning of the grey ring for focus> Would a red micromotor turn it without too much grief? Where are the people getting these sets that are selling them on Yahoo and ebay, for $89 no (...) (26 years ago, 13-Sep-00, to lugnet.robotics)
 
  Rover based on Hanyboard is evolving well!
 
Hi, I managed to build up a pan & tilt platform for my rover out of Servos, I hot glued them together and built a mount for my ultrasonic transducer out of perfboard. Also you need to make a baffle for the rear of the transducer or you do get (...) (26 years ago, 13-Sep-00, to lugnet.robotics.handyboard)
 
  Re: Can't get Linux NQC to compile/Run
 
(...) Try `locate vector.h`. I'm not sure what package vector.h belongs to on Mandrake; on Red Hat 6.x, it's one of the egcs packages, but I know that gcc/egcs is one of the things Mandrake does differently. (26 years ago, 13-Sep-00, to lugnet.robotics.rcx.nqc)

Next Page:  5 more | 10 more | 20 more | 100 more
Redisplay Messages:  All | Compact

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR