 | | Gearing down a lego motor
|
|
Hi, Before I invest a lot of time on this, what is the minimal gearing I need to do in order for a Lego motor to let itself up. How about a lego motor lifting itself and another motor up? I want the motor to be powerful but at the same time fast... (...) (26 years ago, 20-Jan-01, to lugnet.robotics.rcx, lugnet.robotics)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) I cleaned up my code (found one bug!), the patch follows. As you may see now there are two semaphore, because two are the resources to give access to: the LNP buffer and the IR port. I modified the calling of the handlers to avoid race (...) (26 years ago, 20-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Scout and External Iight sensor question
|
|
Hi all, I read once that it is possible to use an external light sensor on on of the 2 available input ports on the SCOUT in RAW mode. I attempted to do this with SENSOR_1 in NQC with little success. Here is what I have tried. (...) (26 years ago, 20-Jan-01, to lugnet.robotics.scout)
|
| |
 | | Sonar and the expansion board.
|
|
I am having quite a problem with getting the proper readings from the sonar. Here is a little background on what I have tried. I have a total of four driver boards and four sonar modules. I have soldered on the non-polarized tantalum 0.1uF (...) (26 years ago, 20-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | Re: adder-subtractor ????
|
|
Could you give some directive to the maximum size of it in 'bricks'? It would be a challenge to make a small adder-subtracter with a small basis, although it would probably mean that it will become a little higher than usual. Jeroen. ___...___ Visit (...) (26 years ago, 20-Jan-01, to lugnet.robotics)
|
| |
 | | Re: adder-subtractor update
|
|
Your adder-subtracter looks a lot like my model which I have placed on my website a few months ago. If anyone is interested, you can find step-by-step building instructions on my site, under the Lego Technic-link (URL) Stap ___...___ Visit my (...) (26 years ago, 20-Jan-01, to lugnet.robotics)
|
| |
 | | RE: Palmpilot and RCX
|
|
Maybe we could just convince someone (Charlie, perhaps) to come up with a Lego IR Tower Springboard module for the Visor?! -----Original Message----- From: Martin [mailto:martin@mediax.com] Sent: Friday, January 19, 2001 2:11 PM To: Dean Husby Cc: (...) (26 years ago, 20-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Palmpilot and RCX
|
|
(...) It hardly seems necessary, and frankly there's probably not enough of a market to actually go through the R&D phase. It should be quite possible to do IR communication with the RCX/Scout/What have you via Palm IR and/or Omniremote IR. (26 years ago, 20-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Palmpilot and RCX
|
|
(...) No, at least not yet. Charlie has discussed with me the *possibility* of developing a library that other people could use to do IR communication via the omniremote hardware. This would allow porting NQC to the Palm in a meaningful way. (...) (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Vison Command & W2K
|
|
I bought a Vision Command set and found that the LEGO software installer detects NT & 2K and refuses to go further. However, the CD for VC has 2k drivers and the QUICKCAM program works fine. Anyone have a way around this problem? (26 years ago, 19-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Palmpilot and RCX
|
|
(...) I'm looking at getting a Visor unit. But it depends on what it can do. Can it use NQC and upload firmware/programs etc? My other main use would be a remote that can send messages up to 255. (...) Can you post some URL's on this info? Thanks (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: RCX Firmware (was: Remote dead, what to do?)
|
|
(...) Correct, there is a 16k ROM chip in the RCX that holds the built in functions and code programing code. (For uploading firmware in the first place etc.) Once the firmware is loaded it takes over most of the functions of the 16k ROM. That's in (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Palmpilot and RCX
|
|
(...) This doesn't always have a low range; Palm V IR and Palm Pro w/2MB upgrade IR are both fairly strong. On other models, yes, the range sucks. Also, there is a omniremote module for the handspring visor which has a very high power IR LED on it. (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: undefined reference to `___ucmpsi2'
|
|
(...) With regards to this, it appears that Markus left out two necessary functions in lib/mint. Specifically, cmpsi2 and ucmpsi2. These are a part of librcx but apparently they were omitted from LegOS when Markus included support for the other (...) (26 years ago, 19-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Scanner / Terrain Modeller?
|
|
It was Ben's creation I was looking for. Someone else has lready sent me the project PDF file, thanks for your help though. Gary (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Scanner / Terrain Modeller?
|
|
(...) I think it was on Ben's lego creation page. (URL) the nameserver for staticip.cx seams to be down today and I can't find the PDF describing the project. Carsten Müller (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: okay, so i'm an idiot WAS :Re: adder-subtractor update
|
|
and i forgot the url again! odin.prohosting.com/...d-sub.html mike "hiding in the corner" fusion "Mike Fusion" <mikefusion@hotmail.com> wrote in message news:G7F3p5.Gn8@lugnet.com... (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | programming interface i think
|
|
i found this in rec.toys.lego (URL) i can't read it, anyone know what it is? something with the borland c++ builder i guess mike "now scratching his head" fusion (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Scanner / Terrain Modeller?
|
|
I, personally, would take some sort or range sensor and pass it over the model in a grid fashon. You could then take that data into a computer and wouldn't require you to have a camera. I can provide help if you want it. This might be somewhat (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | okay, so i'm an idiot WAS :Re: adder-subtractor update
|
|
thanks to all who remembered what it was, my posting was the last thing i did before going home yesterday and i was rushed. i will update it again today because there is a missing piece between the turning motor and the adder differential. it needs (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Palmpilot and RCX
|
|
It is possible, but the IR transceiver in most Palms is too weak to control the device from over ~2 feet away. Most people have success with using a Palm i neither of two ways: 1.) Use the serial port to connect to the IR tower. Advantages: full (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Scanner / Terrain Modeller?
|
|
(...) Oh! I see. OK - then using the Lego camera should be a one place to start. You'll need the power of the PC to turn that into 3D though. There has been some work on the business of turning a LOT of 2D images (taken with a video camera or (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: robolab/rcx/scout/send mail command
|
|
(...) Yes. I've been doing that a lot recently...under NQC that is. (...) Dunno about robolab. On either the RCX or the Scout, I've been using: x = Message() ; to read a message (x==0 if no message has arrived) ClearMessage() ; ...to erase the (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Swedish article about real-size LEGO car
|
|
(...) ___...___ SOPORCEL,S.A. +351-233940411 Dp.Sistemas de Informacao - Sv.Desenvolvimento mailto:marco@soporcel.pt +351-233900312 (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: adder-subtractor update
|
|
LOL, ok, final URL: (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Another way to avoid Float
|
|
For the navigation of my robot, I do not plan to use float or trig function. I will use long integer (32bits). the high 16 bit are the true integer value. the low 16 bits are 1/65535 value. let say 1 = 0x00010000 2 = 0x00020000 2.5 = 0x00028000 2.25 (...) (26 years ago, 19-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Swedish article about real-size LEGO car
|
|
(...) Found one! (URL) Manni - 070-5850517 -"Do not take life too seriously.You will never get out alive." (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Swedish article about real-size LEGO car
|
|
(URL) Company is planning to build a real-sized car that's made with children in mind. I hope some can find a english article about this... //Harri Manni - 070-5850517 -"Do not take life too seriously.You will never get out alive." (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: adder-subtractor update
|
|
And maybe the "d" in add? (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | the 'java on host' concept
|
|
to overcome limitations of the prog. size in my CM, and my experience with Java, I decided to have the applications running on the host laptop. In the mean time things are looking very good. I'm only running Java on the host. I didn't touch the CM. (...) (26 years ago, 19-Jan-01, to lugnet.robotics.rcx.java)
|
| |
 | | Re: adder-subtractor update
|
|
Forgot the 'l' of html ;) (URL) C." <lego-robotics@crynwr.com> wrote in message news:3.0.6.32.200101...gtlinux... (...) be (...) well (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: adder-subtractor update
|
|
(...) At 06:36 16-01-2001 GMT, mike fusion wrote: (...) (URL) ? :) mc. (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | robolab/rcx/scout/send mail command
|
|
i have an rxc, a scout and a copy of robolab 2 for macintosh (i don't have any instruction books for robolab). i understand that it is possible to send commands from the rcx to the scout and receive replys. could any one give me a quick start (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | legOS v2.5 merge-map utility still using perl ?
|
|
I read somewhere that perl was no more needed in v2.5. And as I began with this v2.5 version, I didn't install perl. So when I try to use merge-map to get a symbolic disassembled file of my code, it fails. Should I install perl or is there any way (...) (26 years ago, 19-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Vision command & macintosh
|
|
(...) That is what it seems to be. (...) You can't use a logitech camera with the Lego software, but you can use the lego camera with the logitech SDK though there is no SDK for macintosh systems. Take a look at question No. 7 at (URL)I have no (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Visual NQC 2001
|
|
Thanks to all who have tested my program. I know there are some problems and runtime errors. The biggest problem for me was the bad website on with some of you used the bugs report to tell me what's wrong, but this information didn't never reach my (...) (26 years ago, 19-Jan-01, to lugnet.robotics.rcx.nqc)
|
| |
 | | Re: Lego News?
|
|
(...) Ditto. Any projections for the release of RIS 2.0 or the Scout add-on? Would these be mid-year releases under the usual scheme of things? Also curious, John (26 years ago, 19-Jan-01, to lugnet.robotics.scout)
|
| |
 | | Re: Vision command & macintosh
|
|
(...) I believe that someone said that whilst the Lego camera is made by Logitech, it has a different USB identifier or some such thing - that made it so you couldn't interchange Lego and Logitech cameras with the same software. I have no firsthand (...) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Re: adder-subtractor update
|
|
One question: What is the URL? -- Bob Fay California, USA rfay@we.mediaone.net (URL) (26 years ago, 19-Jan-01, to lugnet.robotics)
|
| |
 | | Lego News?
|
|
Does anyone know what "cycle" Lego uses to release new sets? I'm really curious about any upcoming Mindstorms releases, as are most of the people here too. Thanks! JOSH (26 years ago, 19-Jan-01, to lugnet.robotics.scout)
|
| |
 | | Re: adder-subtractor update
|
|
please take me off the list. I just don't have the time to read all of it Thanks (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | adder-subtractor update
|
|
my site has been updated today, added a new chassis which has a shorter gearing (less gear lashing) but is one brick higher. it is still shorter than a motor any questions? mike (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | Re: undefined reference to `___ucmpsi2'
|
|
(...) Another choice may be a cast in the switch statement, like this: static wakeup_t light_found(wakeup_t sens_num) { switch ((unsigned int)sens_num) { case 2: return (LIGHT(SENSOR_2) > THRESHOLD); break; case 3: return (LIGHT(SENSOR_3) > (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) Ok, I clean up the code and send you a patch. (...) This one is not yet ready. As soon as I do it you'll know. bye Bernardo (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: util/dll-src makefile patch
|
|
(...) current cvs (...) lnp.c under (...) windows. The other (...) They works. :-) Bye, Paolo. --- I'm an optimist, but I don't think it helps. (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: undefined reference to `___ucmpsi2'
|
|
Hi, The problem is that wakeup_t is an unsigned long, and in order to save space, the switch statement is optimized to call a library comparator, ucmpsi2. Since the argument to ds_scale is an unsigned int, the argument to LIGHT should also be an (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Vision command & macintosh
|
|
(...) I had heard that the actual camera was a Logitech QuickCam, but I could find no Mac drivers on their site that will work with the Lego camera. Any ideas? John (26 years ago, 18-Jan-01, to lugnet.robotics, lugnet.robotics.rcx)
|
| |
 | | Re: Sharing USB cable between IR and VC?
|
|
(...) 1. The "hub" inside the camera will not help you unless it actually has additional "ports" on it. It's probably a one port "USB Hub" which is present as a result of logitech using someone else's USB solution instead of developing a custom (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | Re: RCX Firmware (was: Remote dead, what to do?)
|
|
(...) Thanks for the clarification. So... am I correct to assume that there is some portion of the RCX firmware that is not accessable for update/replacement? This would be the portion that describes/controls the 'built-in functions? Thanks again, (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Scout Booster Set
|
|
you may want to hold off on purchasing an IR tower, john barnes is working on one that uses the power from the serial port(doing away with the battery) and the parts should be very cheap. i will be working on a free-form solution that should fit (...) (26 years ago, 18-Jan-01, to lugnet.robotics.scout)
|
| |
 | | Re: Remote dead, what to do?
|
|
(...) Correct, the Remote requires Firmware in the RCX. (...) No. It needs the Firmware to set up the IR port to receive the commands. The Built-in programs will run without firmware with the RUN Button. (...) The SCOUT always has it's firmware. (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | RE: Cable length
|
|
You mean the 9-pin cable for the IR tower, right. Yes, you can use a much longer cable. Get one with one female (holes) and one male (pins) connector, and you should be OK. You have to use it on the computer end, because the tower only accepts a (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | undefined reference to `___ucmpsi2'
|
|
I get this error when linking if I have the following in my source code in a wait_event function: #define THRESHOLD (unsigned short)50 static wakeup_t light_found(wakeup_t sens_num) { switch (sens_num) { case 2: return (LIGHT(SENSOR_2) > THRESHOLD); (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: pass by refrence or value?
|
|
Did you care to declare your global variable as volatile? this (normaly) prevent the compiler to optimize memory access and force it to read the actual value of the variable each time it need it ( instead of localy storing it in a register wich will (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | c++ changes
|
|
After some prompting, I have made the method names in the c++ classes uniform in case. Unfortunately, the changes are not backward compatible. Please let me know of any problems you discover. If I don't hear of any problems, I'll check in the (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | util/dll-src makefile patch
|
|
Hi, Here is a set of patches for util/dll-src/Makefile against the current cvs version. The first patch avoids the need of a symbolic link to lnp.c under unix. Can somebody please let me know if it works under windows. The other patches are for (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Remote dead, what to do?
|
|
(...) No, the Remote functionality requires (AFAIK) the RIS firmware. It won't work with the Robolab firmware which is different. (...) ?? Programs won't run w/o firmware of some kind. (...) The Scout wasn't designed to be used with a remote (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | First SMART meeting reminder
|
|
This is just a reminder that SMART (the Seattle Mindstorms And Robotic Techies) is having their first meeting on Sunday January 28th, at 2pm in the Bellevue Public Library. The first mini-challenge is to build a robot to track the edge of a line. (...) (26 years ago, 18-Jan-01, to lugnet.org.us.smart, lugnet.loc.us.wa.sea, lugnet.loc.us.wa.tac, lugnet.loc.us.wa, lugnet.robotics.events)
|
| |
 | | Re: News sensors and the RDS
|
|
John Barnes wrote in message <4.2.0.58.2001011614...server>... (...) competition (...) I have an answer to this. You don't need a computer to program it and it's easier for younger children (or adults that don't want to get on the computer) to play (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Remote dead, what to do?
|
|
Will the Remote Control directly control the RCX output ports A - C without downloading firmware? Will it run the RCX built-in programs without downloading firmware? The output ports and built-in programs of the Scout from set 9735 Robotics (...) (26 years ago, 18-Jan-01, to lugnet.robotics)
|
| |
 | | pass by refrence or value?
|
|
Hi all, i have a slight problem with legosv0.2.5 . The program code on the rcx is set up so that there is serverall callback methods which get called when a message comes in on the particular port for that object or class. These callback methods set (...) (26 years ago, 18-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: LegOS 0.2.5 and LNP
|
|
(...) Btw. README is (...) Ooops... :-) Changed to 0.2.5 version inside. (...) transport (...) packets of (...) mainly as way for (...) collisions, lost (...) which works as (...) write code to (...) To cut time (...) code that (...) directives (...) (26 years ago, 17-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Palmpilot and RCX
|
|
i have it at home, but i do have someone else's port of nqc to the palm, and the direct controller, i guess you can use the palm as a remote. actually it may be for windows ce, but i'll check all the same. m. "Sebastian Scherer" (...) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | RE: Sharing USB cable between IR and VC?
|
|
Probably not a good idea. First, unless you replace the cable on the camera, you'll have to roll it up and carry it on your robot. USB cables have a minimum length, so you need another rolled up USB cable carried on your robot to connect the tower (...) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Help/Advice How to buy certain bricks in the UK
|
|
I think Pitsco sells two big turntables for $10! JB (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Re: News sensors and the RDS
|
|
please take me off the list. I don't have time anymore to read all the mail. Thanks (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | RE: LEGO Injuries (was adder-subtractor)
|
|
(...) I once tried to catch one of those rubber-tipped "arrows" in mid-air between my two hands, using a motion like clapping your hands. The problem is that I caught it sideways, with the rubber-tipped end pointing at one hand, and the thin end (...) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Help/Advice How to buy certain bricks in the UK
|
|
Funny you should mention this because I just finished my "rough draft" syncro-drive bot. I found my turntables at www.brickbay.com for about $10 US each. There are are few UK located shops but they currently seem to be out of tables in any quantity. (...) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Palmpilot and RCX
|
|
Hi! Does anybody see a possibility to use the Palmpilots IR-Port with the RCX. I know that it is a IrDA-Port, but is it possible that the RCX understands IrDA or either way the Palm sends some RCX style commands? Any suggestions? Thanx! Sebastian (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Re: News sensors and the RDS
|
|
(...) Yeah, it's called an RCX ;) I have no idea why the RDS brick has any real appeal in the face of competition from the RCX one. No active sensor capability, and only 1k of room for programs? Even at Lego's $129 for the RCX, if you already have a (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Motor mis-match.
|
|
(...) What's 'semi' about it ? (...) I'm not sure that this is true. Firstly, the copper windings will become poorer conductors as they heat up. And they will likely be the hottest part of the motor. Secondly, thermal expansion may well increase the (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | LegOS 0.2.5 and LNP
|
|
Yesterday I downloaded legOS 0.2.5 and peeked at the code. Btw. README is not up to date. For last two month I was working with a friend of mine on a transport protocol implemented on top of LNP for the transmission of packets of unlimited size and (...) (26 years ago, 17-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Vision Command within Virtual PC ver 4
|
|
Uups, .... ;-) Rainer (26 years ago, 17-Jan-01, to lugnet.robotics.vc)
|
| |
 | | Re: Vision Command within Virtual PC ver 4
|
|
(...) If you try to run the Vision Command software with the logitech driver, this won't work ! The lego-camera comes with a proprietary driver. The vision command software neither run with the logitech driver under Windows98. (...) Rainer (26 years ago, 17-Jan-01, to lugnet.robotics.vc)
|
| |
 | | The Lego Spooler
|
|
The LEGO Spooler is my latest creation. It is a model of a photographic film spooler which converts large stock-rolls of microfilm to small customer rolls. You can see it here: (URL) was a fun thing to build. There are three control systems at work (...) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Vision Command within Virtual PC ver 4
|
|
(...) If you try to run the Vision Command software with the logitech driver, this won't work ! The lego-camera comes with a proprietary driver. The vision command software neither run with the logitech driver under Windows98. (...) Rainer (26 years ago, 17-Jan-01, to lugnet.robotics.vc)
|
| |
 | | Re: Sharing USB cable between IR and VC?
|
|
(...) 1. There are actually a USB hub inside the CAM. Both the logitech cam and mic are connected to this hub. (That's why you find 3 devices in the windows 9.x after you installed the driver) 2. The case material is transparent. It means a IR or (...) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | RIS 2.0 / USB / MAC?
|
|
As the RIS 2.0 will support USB, is there in suggestion that it will also support the iMac/Mac platform this time around? Scott A (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Vision Command within Virtual PC ver 4
|
|
I have installed Vision Command in VPC4* on my G3/233 Powermac but cannot get it to work - plus the Lego software for it runs extreemely slowly. The Legocam is made by Logitech and I downloaded the only Mac USB drivers I could find on their website (...) (26 years ago, 17-Jan-01, to lugnet.robotics.vc)
|
| |
 | | Re: Lght Sensor & Three colors?
|
|
(...) I had good luck with black, green, and yellow. You could probably substitute red or white for the yellow if you wanted. Dave (26 years ago, 17-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | Re: Sharing USB cable between IR and VC?
|
|
(...) If I understand USB you will need a HUB. You can't just splice them together. Dean -- Coin-Op's For Sale!: (URL) Lego Workshop: (URL) Lego Club: (URL) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Re: News sensors and the RDS
|
|
(...) You only get 400 bytes of memory for your program. I'm afraid something like that would eat up a huge chunk of the available ram... Dean -- Coin-Op's For Sale!: (URL) Lego Workshop: (URL) Lego Club: (URL) (26 years ago, 17-Jan-01, to lugnet.robotics)
|
| |
 | | Re: downloading the pcode during assembly
|
|
It is possible that the pins of the 68HC11 chip are not making good contact in the socket. To fix the problem remove the chip, take a sewing push pin and make a hook in the tip. Use it to very gently pull out each pin connection in the CPU socket. (...) (26 years ago, 16-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | 2x20 Optrex LCD for my handyboard
|
|
Hi, I recently purchased a 2x20 LCD pannel for my Handy Board, I need to know how to modify the pcode to take advantage of the new screen, Can anyone help? (26 years ago, 16-Jan-01, to lugnet.robotics.handyboard)
|
| |
 | | Scanner / Terrain Modeller?
|
|
Some time ago I saw a website where someone had created scanner / terrain modeller. One could place objects under the scanner and using some software they'd written it would create a 3d representation of it on their PC. I remember they'd placed a (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Sharing USB cable between IR and VC?
|
|
The Vision Command camera is connected to the PC using USB. In RIS 2.0 the IR tower will use USB too. Can I put both the VC camera and the IR tower on the mobile robot, and make them share the same umbilical cord to the PC? Will I also need to put a (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | adder-subtractor site
|
|
well, after wasting the whole morning at work finding out that i had a #$%$@#%^ SPELLING ERROR. the site is finally up at (URL) forgot to bring the two reference files and will update as soon as possible (have to give credit where credit is due) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Re: News sensors and the RDS
|
|
There must be a way to come up with a transmitter that interprets the signal and creates a discrete signal output that the RDS could use. Then you could program that at "X" rotation or feet do "Y". Has anyone tried this? Rose Dean Husby wrote in (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Truck move along round
|
|
(...) Why go high-tech when low-tech might work just as well? The last GMLTC layout had a small dump truck that would drive in circles. Here's a thumbnail: (URL) small truck in the center of the picture has a magnet mounted on the front. Underneath (...) (26 years ago, 16-Jan-01, to lugnet.robotics.rcx, lugnet.trains)
|
| |
 | | Re: Help/Advice How to buy certain bricks in the UK
|
|
(...) I'd try the Service Catalogue first of all - the phone number is in the leaflets that (used to?) come with sets. I can't remember if they do a large turntable or not. They are also available in the DACTA range, which can be bought from (...) (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Truck move along round
|
|
(...) Note that the Miniland autonomous vehicles do this... every so often they come to a stop at a known place, their whiskers pick up recharge and exchange messages with the central controller, and reset their location (they learn how far they've (...) (26 years ago, 16-Jan-01, to lugnet.robotics.rcx, lugnet.trains)
|
| |
 | | Re: Truck move along round
|
|
(...) Hi Z. , This will only be possible with limitations. Because you will have several errors every round, you will lose your track after some rounds. This errors are given from (for example) 1. not at once stopping motors when the given value for (...) (26 years ago, 16-Jan-01, to lugnet.robotics.rcx, lugnet.trains)
|
| |
 | | Re: Check LEGO set form Mobile Phone
|
|
Looks like the LUGNET version is WEB only, while this new version is a minimal interface created for some web enabled cell phones. (...) (26 years ago, 16-Jan-01, to lugnet.trains, lugnet.general, lugnet.lego, lugnet.robotics, lugnet.technic)
|
| |
 | | Re: lcd trouble and velocities questions.
|
|
first message, first error! As this message is about legOS, I repost it in lugnet.robotics.rcx.legos If you have any answer to it, please reply in the lugnet.robotics.rcx.legos thanks. michael. (26 years ago, 16-Jan-01, to lugnet.robotics.rcx)
|
| |
 | | legOS lcd management and thoughts on velocities
|
|
Hello! I' am french, from Paris ( a way to say: excuse my english... or feel free to correct it!). Few weeks ago I download legOS (v2.5), and I made my first step with it. First all I wish to thank all people involved in this project. This OS is (...) (26 years ago, 16-Jan-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Check LEGO set form Mobile Phone
|
|
(...) thats exactly what Lugnet offers here (URL) (26 years ago, 16-Jan-01, to lugnet.trains, lugnet.general, lugnet.lego, lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Check LEGO set form Mobile Phone
|
|
(...) thats exactly what Lugnet offers here (URL) (26 years ago, 16-Jan-01, to lugnet.trains, lugnet.general, lugnet.lego, lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Possible bug in firm0328 or NQC 2.2
|
|
"Dave Baum" <dbaum@spambgoneenteract.com> ha scritto: (...) I feel totally stupid, first thing I should have checked. Thanks Dave. Mario (26 years ago, 16-Jan-01, to lugnet.robotics.rcx.nqc)
|
| |
 | | Help/Advice How to buy certain bricks in the UK
|
|
I am trying to build a synchrodrive. For this I require 4 turntables (part no.9876). If I live in the UK, what would be the quickest way of obtaining these pieces? Thanks for your time, Robin (26 years ago, 16-Jan-01, to lugnet.robotics)
|
| |
 | | Re: Lght Sensor & Three colors?
|
|
Matthew Fisher <matthew.fisher@bigfoot.com> wrote in message news:G78nAy.D0A@lugnet.com... (...) The LEGO light sensor is based on a silicon photo transistor. It really doesn't "see" the colors we do. It is sensitive to the near IR. That said, I'd (...) (26 years ago, 16-Jan-01, to lugnet.robotics.rcx)
|