 | | Re: RIS2 Upgrade on W95 & Pentium(I)
|
|
(...) Well, I have a fully functional RIS 1.5 including the serial tower. I got the RIS2 "Upgrade" disk from S@H. It's installer checks for OS and bails when it finds W95. And, of course, the .cab files are password protected, so, none of this (...) (25 years ago, 21-Dec-01, to lugnet.robotics.rcx, lugnet.robotics)
|
| |
 | | Re: Using the Home-made One-way valve
|
|
(...) Great ideas there! The Window Walker is a really nice practical application of the one-way split-valve. So that's how the old pre-1989 pneumatic systems operated...:-) -Gaurav Thakur, raving madman cp5670@home.com (URL) (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | I need to borrow a USB Tower.
|
|
I don't post to these groups very often, being mostly a lurker, but I am attempting to make a contribution to the world of lego robotics. I am working on what will be an open source version of the spirit.ocx. In fact it's been available as an alpha (...) (25 years ago, 21-Dec-01, to lugnet.robotics.rcx)
|
| |
 | | Re: USB, Windows, legOS
|
|
I tried the patch and still get the error "Error 6 GetCommState". Anyone know what this error means and what I can do to correct it? I would really like to get legOS running. (...) (25 years ago, 21-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Storing Data
|
|
(...) It was suggested by some of my 'c++' co-workers that this was the case (shared memory was available). However, I don't deal with that in my Visual Basic world. They also suggested there were 'unused' memory blocks in LegOS where data could be (...) (25 years ago, 21-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Scout SDK missing from mindstorms.lego.com?
|
|
Hi Chris, I seem to be hosting the only copy in existance :) Try here: (URL) down to the downloads!) Phil. (...) (25 years ago, 16-Dec-01, to lugnet.robotics.scout, lugnet.robotics)
|
| |
 | | Re: Storing Data
|
|
(...) As there is no memory management, any memory not on the stack is by definition shared between any threads. Concurrency control is up to you however. John A. Tamplin jat@jaet.org 770/436-5387 HOME 4116 Manson Ave 770/431-9459 FAX Smyrna, GA (...) (25 years ago, 21-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Remote servo motor controller for RCX
|
|
Mindsensors has developed a two servo motor control for the RCX. This interface works on IR message Sent from RCX. It can control tow servo motors with 1 degree resolution, and can move from 0 to 180 degrees. You can have look at it (URL) this page (...) (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Using the Home-made One-way valve
|
|
(...) Agreed! (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | New MindStorms SDK
|
|
Dear LUGnetters and LEGO MINDSTORMS users You can download our new LEGO MINDSTORMS SDK from: (URL) non-standard location is because we were delayed in getting it up and running on the official mindstorms.lego.com pages before X-mas. However, we felt (...) (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Storing Data
|
|
(...) What you request is shared memory and shared memory is not a part of legOS. My way to simulate shared mem is to put the two (or more) tasks into one legOS program. Each task is started as a thread by an execi() call, triggered by the user via (...) (25 years ago, 21-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Using the Home-made One-way valve
|
|
(...) (URL) interesting robot - and it works! BEN (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | Using the Home-made One-way valve
|
|
Wow, I didn't realise that Christophe's home-made one-way valve would lead us into such deep discussion into vacuum storage and the like... On a more practical plane, here are some uses for the one-way valve (URL) they don't require you to have a (...) (25 years ago, 21-Dec-01, to lugnet.robotics, lugnet.technic)
|
| |
 | | Re: Home-made One-way valve
|
|
If the surrounding environment is the same as what should be in the tank if not for the vacuum - since all are partial anyway - the the vacuum doesn't increase. The matter has to be the same. Andy ----- Original Message ----- From: "Steve Baker" (...) (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | Re: RIS2 Upgrade on W95 & Pentium(I)
|
|
(...) Yes - that'll be the problem. Win95 definitely doesn't support USB. There was a patch put out by M$ to add USB to Win95 but it didn't work well. ---...--- Steve Baker ---...--- Mail : <sjbaker1@airmail.net> WorkMail: <sjbaker@link.com> URLs : (...) (25 years ago, 21-Dec-01, to lugnet.robotics)
|
| |
 | | announcing the Handy Cricket!
|
|
(a little late for X-mas, but maybe in time for New Year's...) As many of you know, when I was at MIT one of the last things I worked on (from 1996 to 2000, actually) was a tiny robotics controller called the Cricket. In May, 2001, I obtained rights (...) (25 years ago, 20-Dec-01, to lugnet.robotics.handyboard)
|
| |
 | | RE: RIS2 Upgrade on W95 & Pentium(I)
|
|
Well the concern there is that RIS2.0 uses a USB IR tower - which is not natively supported by W95. If you can get USB working, then you might be alright... HTH, James. (...) (25 years ago, 20-Dec-01, to lugnet.robotics.rcx, lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) So you are happy to say that you can increase the amount of vacuum in a sealed tank by placing it at the bottom of a bucket of water? Mmm'K. ---...--- Steve Baker ---...--- Mail : <sjbaker1@airmail.net> WorkMail: <sjbaker@link.com> URLs : (8 (...) (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | RIS2 Upgrade on W95 & Pentium(I)
|
|
Has anyone succeeded in getting the upgrade to work on less-than-minimum-requirement PCs? In their infinite wisdom, LEGO has "upgraded" the minimum platform for the RIS. I'd like to be able to run it on my existing machine. Moving up to W98 is (...) (25 years ago, 20-Dec-01, to lugnet.robotics.rcx, lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) If you had a 1 atmosphere vacuum in a blue LEGO tank and you took it to the bottom of the Mariana Trench you would have about 13,000 atmospheres of vacuum in it. And if you took it out into space you would have *no* atmospheres in it. All this (...) (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | LNP: host address
|
|
Is there a reason to "hardcode" the host address using a define (LNP_HOSTADDR)? Things would be easier for me if I could change the address at run time (when calling lnp_init). Is it safe to replace the defines by a variable? Eric (25 years ago, 21-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Robot Controller 1.3b1
|
|
I've posted a new version of Robot Controller ---the ideal companion to NQC for Mac OS X users. This version adds several new features: it can synchronise the RCX watch with your computer's clock, it has a new pane which lets you read and change the (...) (25 years ago, 20-Dec-01, to lugnet.robotics.rcx.nqc)
|
| |
 | | Re: Mario's new book...
|
|
I just got my copy of this book from Amazon yesterday. In terms of explaining the elements of mechanical design of Lego robot building (which is what the author intended to focus on), it is an excellent book! I hardly slept last night because I (...) (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | Source for a few IS1U60 sensors
|
|
I'm looking for two of the IS1U60 sensors for the Handyboard. Anyone know where I can purchase them? The only place I could find that carried them would only sell them in lots of 1000 pieces. If you know where I can get a couple please let me know. (...) (25 years ago, 20-Dec-01, to lugnet.robotics.handyboard)
|
| |
 | | Proximity
|
|
Next question: Does any one have a proximity routne (code) I can review (steal) using LegOS, a light sensor, and the IR port? I've used the NQC stuff, but now I've moved up to LegOS. I haven't been able to find the right commands for the IR port. (...) (25 years ago, 20-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Storing Data
|
|
When using LegOS (a most excellent creation, btw) is it possible to store a value and use it in different programs? Actually, I'm sure it is, but how would someone do it? I want to have one program to configure my light sensor, and use those values (...) (25 years ago, 20-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) a (...) tanks (...) own (...) So, define vacuum as an area of lower pressure than the surrounding environment. I think that satisfies most if not all of your requirements, and is what most people seem to think of when they mention vacuum. Andy (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
In lugnet.robotics, sjbaker1@airmail.net writes: [snipped rant about light-bulbs] (...) Well, since a perfect vacuum has never (AFAIK) been shown to exist anyware (even in space), I guess you're right. However a partial vacuum is easy to "store" and (...) (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) Argh! <rant> It's been a long time since domestic lightbulbs were even partially evacuated - these days they are filled with some kind of relatively inert gas. Back in the 1940's and 50's they were partially evacuated - and on some old movies (...) (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
c s soh <cssoh@singnet.com.sg> wrote in message news:3C213F4F.CC899E....com.sg... (...) and (...) How about a vacuum flask (thermos), domestic lightbulb, or even CRT (cathode ray tube such) as in your TV or monitor. These all rely on a stored (...) (25 years ago, 20-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) I think the reason for that is simply that you can't store very much "vacuum" in a tank. While you can pressurize a tank to several hundred PSI or better, for vacuum you're limited to completely (well, OK, nearly completely) evacuating it--a (...) (25 years ago, 20-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) Somehow I'm a bit queasy about this business of "storing vacuum" in a tank. So I checked with the local supplier of industrial gases. If you need a tank of compressed air, that's no problem. But a tankful of vacuum, er that's not listed in the (...) (25 years ago, 20-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Contests?
|
|
I'm working on a new web site which I hope to launch over the holidays, but I've got a couple of January events listed on the calendar already. It's basically non-functional now, so if you know of an event, drop me an email or post it here and I'll (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Contests?
|
|
Hi. Are there any robot contests other than the Trinity College Fire Fighting Robot Constest being held in 2002? Best Wishes Barbara Nostrand (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Proximity sensors.
|
|
see (URL) capteur section ----- Original Message ----- From: "Ismael Salvador" <issalig@doctor.upv.es> To: <lego-robotics@crynwr.com> Sent: Wednesday, December 19, 2001 6:26 PM Subject: Proximity sensors. (...) building (...) cheap (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Chemical Sensors
|
|
You can interface pH and other sensors with Mindstorms using logIT, look at (URL) ColePalmer (mentioned below) it is not clear to me what they offer in terms of Mindstorms compatible sensors? - Thomas Hoeg-Jensen (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Chemical Sensors
|
|
(...) J. David Malinsky University of Calgary Department of Chemistry Phone (403) 220-5371 Fax (403) 289-9488 mailto:malinsky@ucalgary.ca (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Chemical Sensors
|
|
Does anyone know of sources for chemical sensors. Things that can report ph, oxidation, etc? Robb, or bid at (URL) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Proximity sensors.
|
|
(...) building (...) For cheapness the following probably can't be beat: (URL) ($free) otherwise you can buy IR proximity sensors based on reflected IR: (URL) ($40) (URL) ($34) (URL) ($14) or a sonar range sensor: (URL) ($80) or a brick that (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Proximity sensors.
|
|
I have done a few proximity sensors using the light sensor and the RCX's messaging. Examples are here: (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Proximity sensors.
|
|
Hi all. I want play with my RCX this Christmas so I have thought about building a proximity sensor. So guys, do you have any ideas?. I prefer simple and cheap solutions. Bye. (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Serial Port (IR Tower) communication procedures with LegOs
|
|
If you mean standard firmware message, I think you should use my remote control patch for legOS025, you can find them at (URL) luck! Zhengrong (...) (25 years ago, 19-Dec-01, to lugnet.robotics, lugnet.robotics.rcx.legos)
|
| |
 | | Re: Mario's new book...
|
|
(Posted this to .books too, but I don't know if anyone bothers looking there any more ...) This book is available (in stock!) from Computer Manuals at (URL) . £19.95, free UK p&p until 24th December, and if you review any books they're giving away a (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Serial Port (IR Tower) communication procedures with LegOs
|
|
Hi, We need to send and receive messages between a PC and a RCX with legOs, but we can't find the serial communication procedures in the code or libraries. Does anybody can help us??? Thanks in advance, Mauro + Prof. Dr. Mauro Roisenberg Dept. de (...) (25 years ago, 19-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Shuting up the RCX
|
|
It is easier to use legOS to instead NQC, and it is more power, very easy to be used. Zhengrong (...) (25 years ago, 19-Dec-01, to lugnet.robotics.rcx, lugnet.robotics.rcx.nqc)
|
| |
 | | Re: Battery use
|
|
Yes, but it won't last long. The HB's electronics draw around 20 - 40 mA. the lifetime of an alkaline 9v is approx 1 Amp hour. So that give you 25 - 50 hours of run time. In practice, you'd get less, 'cause the 1 AH rating assumes a much slower (...) (25 years ago, 19-Dec-01, to lugnet.robotics.handyboard)
|
| |
 | | Re: Shuting up the RCX
|
|
(...) Well, you could hack the LEGO firmware. Not easy but possible. Jürgen (25 years ago, 19-Dec-01, to lugnet.robotics.rcx, lugnet.robotics.rcx.nqc)
|
| |
 | | Battery use
|
|
If I use a separate battery supply for the motor outputs, will a single 9v battery provide sufficient power for the rest of the Handyboard instead of the 8 AA cells (9.6V)? (25 years ago, 19-Dec-01, to lugnet.robotics.handyboard)
|
| |
 | | Re: Home-made One-way valve
|
|
Alternativeley you can continue using the valve with the old style pump and have an air tank (if you own two) on each side i.e. one that holds the vaccum and one that holds the pressureized air. but... theres still the problem of flipping the valve (...) (25 years ago, 19-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) Yes, you can store vacuum. But all you can store is 1 atmosphere. So a little blue tank with 4 atmospheres has a lot more storage than one with negative 1 atmosphere! Also, it's real hard to make vacuum, in the real world. I once built a (...) (25 years ago, 18-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Shuting up the RCX
|
|
(...) Right, that's an option but perhaps not the ideal for me since I'm working with NQC. Any other? Thanks anyway Jürgen. (25 years ago, 18-Dec-01, to lugnet.robotics.rcx, lugnet.robotics.rcx.nqc)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) Also, the external pressure is usually fairly fixed (atmospheric pressure) and there's a lower limit to the internal pressure (absolute vacuum), but no intrinsic upper limit (though it is limited by the strength of the tank). Therefore a (...) (25 years ago, 18-Dec-01, to lugnet.robotics, lugnet.technic)
|
| |
 | | Re: How to get interval of time
|
|
(...) correct? Yep, that's how I do it & it seems to work. ROSCO (25 years ago, 18-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Site Redesign
|
|
Hi all. I have finally gotten around to yet another site re-design. I have added some new areas including pics of my climber robot, and a reviews section. link - www.astolfo.com/lego Dave (25 years ago, 18-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
Instead of pushing a pneumatic switch back and forth, you can use the old non-return valve: (URL) the pump to the middle hole, connect the air tank to the left hole and leave the right hole free. The old style pump will pull air out of the tank and (...) (25 years ago, 18-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) matter, (...) Well said, Steve, I agree. A tank is simply a container whose inner gas (air in this case) can have a different pressure from the one outside. This pressure can be higher or lower than the one of the air in the environment, but (...) (25 years ago, 18-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) ...the whole concept of "storing vacuum" is a little disturbing. :-) Perhaps "lowering the air pressure" in the tank would be a little more reasonable! ---...--- Steve Baker ---...--- Mail : <sjbaker1@airmail.net> WorkMail: <sjbaker@link.com> (...) (25 years ago, 18-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Installation Problem: RIS2.0 USB on Fast Athlon ??????
|
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Just a few questions. What type processor is it? (Pentium III or Pentium IV) What OS? The reason being is, there are some minor issues with Win98 and Pentium IV processors, as well as having some (...) (25 years ago, 18-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) you can store the vacuum in the LEGO tank or any other tank for that matter, but the technic pumps will not work for this unless you do a bit of work to figure this out: if you hook an old style pump straight to a valve (dont know which pin (...) (25 years ago, 18-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) made (...) hose (...) You store it the same way. A tank can store a vacuum as well as pressure - it's basically equivalent to increasing the pressure outside. This principal was used on many steam trains (and some diesels?), which use vacuum (...) (25 years ago, 18-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) Alas it doesn't work that way at all. The air tanks will definitely not work with the old style pneumatics whatever way you try to incorporate them in (yep, I spent a good hour checking). Now as I understand it, the air tank is meant to store (...) (25 years ago, 18-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | How to get interval of time
|
|
In NQC, I can use ClearTimer(0) and Timer(0) to get interval of time, how can I do it in legOS? I used t1 = sys_time, then t2 = sys_time, so interval = t2 - t1, is it correct? Zhengrong (25 years ago, 18-Dec-01, to lugnet.robotics.rcx.legos)
|
| |
 | | Robot Controller 1.2b1
|
|
I've posted a new version of Robot Controller ---the ideal companion to NQC for Mac OS X users. This version fixes a couple of bugs. Download from: (URL) the way, has anyone tried it? It would be nice to get some feedback! Barney. (25 years ago, 17-Dec-01, to lugnet.robotics.rcx.nqc)
|
| |
 | | Re: RCX remote control and the use of PICs
|
|
Hi Stef, A great project, well designed, and very well documented and presented. Thanks! I'll probably make one of these pretty soon. Nice work Michael (...) (25 years ago, 17-Dec-01, to lugnet.robotics, lugnet.robotics.rcx, lugnet.robotics.rcx.nqc)
|
| |
 | | RCX remote control and the use of PICs
|
|
hi All, Inspired by some applications of the 16F84 PIC, we came up with the idea to make a IR-module, which is capable of doing all the InfraRed tasks we could imagine with the RCX. Well it hasn't come so far, but we have build a RCX IR-remote (...) (25 years ago, 17-Dec-01, to lugnet.robotics, lugnet.robotics.rcx, lugnet.robotics.rcx.nqc)
|
| |
 | | Re: How to read the touch sensors on the Scout in NQC?
|
|
I was using my scout this past weekend as a coinbox detector to launch a mono rail. The touch sensors work exactly as Dave suggests. You can also just do the following: until(SENSOR_1); Waits until it's touched. until(!SENSOR_1); Waits until the (...) (25 years ago, 17-Dec-01, to lugnet.robotics.rcx.nqc, lugnet.robotics.scout)
|
| |
 | | Re: Injection-Molding Factory
|
|
(...) I will try to answer your questions here: Andrew- ROBOLAB is a great program. NQC is also a great program. I have used them both. It depends on which you prefer. In my case, I do not use (say) C++ elsewhere and I find ROBOLAB easier to (...) (25 years ago, 17-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Shuting up the RCX
|
|
(...) Change the firmware. Maybe we should make this a selling point of Lejos :-) (at the moment it beep too, I think) Jürgen (25 years ago, 17-Dec-01, to lugnet.robotics.rcx)
|
| |
 | | Re: How to read the touch sensors on the Scout in NQC?
|
|
(...) That is what I thought, but it will determine if the touch sensor is pressed. (...) Dunno, I'll try. Then again, if !=255 works... (...) If it were not for Perl I'd never write a line of code ^_^ (25 years ago, 17-Dec-01, to lugnet.robotics.rcx.nqc, lugnet.robotics.scout)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) Difficult to regulate though - as the same pump affects both. When the high pressure one is full & low pressure one needs pumping, it'll keep adding pressure to both (one outside, one inside). You'd have to have some kind of pressure release (...) (25 years ago, 17-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: Three kinds of motors?
|
|
(...) All three work with Mindstorms. * The micromotor is low in power and low in speed - you'd really only want to use it where space is at a premium. The micromotor is just 2x2 studs and two bricks high! * The motor that comes with RIS and RDS is (...) (25 years ago, 17-Dec-01, to lugnet.robotics)
|
| |
 | | Three kinds of motors?
|
|
Looking at brickbay for an extra motor for mindstorms i found three different kinds of motor: - Technic motor (not the one it came with RIS) - Technic Mini-motor (RIS one) - Technic Micromotor (?) Can someone explain the differences, and most (...) (25 years ago, 17-Dec-01, to lugnet.robotics)
|
| |
 | | Shuting up the RCX
|
|
Hi all. Just a simple question, does anybody know if there is anyway to stop rcx beeping everytime i turn it on or off. It is terribly annoying at 2:00 in the morning :-) Thank Francis (25 years ago, 17-Dec-01, to lugnet.robotics.rcx)
|
| |
 | | Re: How to read the touch sensors on the Scout in NQC?
|
|
This program turns on motor A and leaves it running until a touch sensor attached to input 1 is pressed, then it turns off the motor and plays a sound: task main() { On(OUT_A); until(SENSOR_1 == 1); Off(OUT_A); PlaySound(SOUND_UP); } Dave (...) (25 years ago, 16-Dec-01, to lugnet.robotics.rcx.nqc, lugnet.robotics.scout)
|
| |
 | | Re: How to read the touch sensors on the Scout in NQC?
|
|
Hi Chris, (...) this is a bit crazy, unless your sensor value is a bit pattern. (...) This is sensible, but are you sure it's ok to use equality and not inequalities like SensorValueRaw(1) < 240? (...) but it's equivalent, also in C, where & is (...) (25 years ago, 16-Dec-01, to lugnet.robotics.rcx.nqc, lugnet.robotics.scout)
|
| |
 | | Re: Home-made One-way valve
|
|
(...) stuff. You say it is not possible to use an air tank in the old style circuit, but would it work with two air tanks, one on the high pressure hose and the other on the vaccuum hose, between the pneumatic "diode" and valve? Jennifer (25 years ago, 16-Dec-01, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: How to read the touch sensors on the Scout in NQC?
|
|
I've sort of solved my problem, but not in a way which really makes total sense. Both of the below fragments work as expectd: #1 if ((SensorValueRaw(1) & SensorValueRaw(0)) != 255) #2 if ((SensorValueRaw(1) != 255) || (SensorValueRaw(0) != 255)) (...) (25 years ago, 16-Dec-01, to lugnet.robotics.rcx.nqc, lugnet.robotics.scout)
|
| |
 | | How to read the touch sensors on the Scout in NQC?
|
|
All, I'm feeling pretty stupid right about now. I've read the NQC docs, looked in the newsgroups, books, etc, but I can't seem to figure out how to read the touch sensors on my Scout. I want to implement a bumper checking task but no matter how I (...) (25 years ago, 16-Dec-01, to lugnet.robotics.rcx.nqc, lugnet.robotics.scout)
|
| |
 | | Re: About SensorValueRaw(SENSOR_3) in Scout
|
|
Zhengrong, I'm sure you figured this out by now, but I just got it last night so here is a task which reads the light sensor and outputs a sound based on the raw reading. task drone() { CalibrateSensor(); while (shut_up==0) { int b = (...) (25 years ago, 16-Dec-01, to lugnet.robotics.scout)
|
| |
 | | Re: MIDI to NQC/RIS2.0 translator "Midi2LSC"
|
|
Makino-san, I'm gald you did this because you just saved me the trouble of doing it myself!!! Thanks, Chris Barker (...) (25 years ago, 16-Dec-01, to lugnet.robotics, lugnet.robotics.rcx, lugnet.robotics.rcx.nqc)
|
| |
 | | Installation Problem: RIS2.0 USB on Fast Athlon ??????
|
|
Anyone heard of this?? Getting desparate!! I have installed RIS2.0 on about 12 machines of various types at the local school, and on my wife's IBM laptop: no problems. I recently built a new machine. Fast (1.4G) AMD Athlon, 512M, ASUS motherboard. I (...) (25 years ago, 16-Dec-01, to lugnet.robotics)
|
| |
 | | Home-made One-way valve
|
|
For those who are willing to dismember their Legos, here's how to make your own one-way valve from the hand pump: (URL) designed by Christophe Masclet from France. To be sure, Chris has some more home-made pneumatics stuff coming up. Btw, the (...) (25 years ago, 16-Dec-99, to lugnet.robotics, lugnet.technic, lugnet.build)
|
| |
 | | Re: legOS
|
|
Luis Villa wrote a howto for legOS. (URL) is a legOS list at lugnet. Andy ----- Original Message ----- From: "nanobapt" <nanobapt@nordnet.fr> To: <lego-robotics@crynwr.com> Sent: Friday, December 14, 2001 2:38 PM Subject: legOS (...) (25 years ago, 15-Dec-01, to lugnet.robotics)
|
| |
 | | Pictures from Mindfest in Texas
|
|
almost 4 months late, but who is counting? Pictures of spin-art machines from Mindfest in Forth Worth: (URL) Erwin (URL) (25 years ago, 15-Dec-01, to lugnet.robotics.rcx)
|
| |
 | | Re: learning RoboLab (long)
|
|
(...) I haven't seen this but I imagine that it is similar to the Control Lab version, only taking advantage of the multi-processing capability of the RCX. At least that was my $0.02 during the brainstorming session for this packet. :) (...) If this (...) (25 years ago, 15-Dec-01, to lugnet.robotics.rcx.robolab, lugnet.edu, lugnet.dacta, lugnet.books, lugnet.robotics.scout, lugnet.robotics.vll)
|
| |
 | | Re: Injection-Molding Factory
|
|
Great job! The fiber optics are just super in the movie. -- Bob Fay THE SHOP (URL) Kalpin" <jdkalpin@sympatico.ca> wrote in message news:GoCoIG.L0o@lugnet.com... (...) Molding (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Injection-Molding Factory
|
|
Oh, that's cool! I worked with Injection molding machines as part of my college degree, and worked a few jobs with IM machines--killer job! -Scott (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Forced to use IR Tower?
|
|
(...) built into your (...) this is not (...) You understood me correctly. <snip> :-( (25 years ago, 13-Dec-01, to lugnet.robotics.rcx)
|
| |
 | | Re: I'm not into robotics myself but........
|
|
[snip] (...) The software sounds like an interesting project, but I'd have to know how the hardware works and I'm not sure I could even do it. Keep us updated if you decided to build it. (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | legOS
|
|
Did some help me for an introduction to legOS ??no howto please ... nanobapt (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Expansion sets questions
|
|
(...) One thing that's thrown me in the past is that the big blue brick and the big yellow brick (The Scout and RCX respectively) are not quite the same height and have totally different mounting holes. Whilst it's generally possible to adapt Scout (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Injection-Molding Factory
|
|
My 0.00000250 Ton LEGO Injection-Molding Factory can be seen at (URL) Navigate to the section: "Inj. Molding Factory". It consists of a Mold Press, with a motorized screw, barrel heaters, a pneumatic ram; also a 4-cavity mold with a manifold heater (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Expansion sets questions
|
|
Greetings, Julie! IMHO you're perfectly safe in putting them under the tree! To be honest, "RIS required" seems pretty far-fetched of LEGO... I believe the software on the CDROM only provides building instructions (and may integrate with RIS is some (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | RE: Expansion sets questions
|
|
He can of course use the regular old lego parts from the kit to build things (robotic or otherwise). As far as the Mindstorm specific stuff he will probably find that less useful with the Scout. DISCLAIMER: I don't remember the exact part list for (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Expansion sets questions
|
|
Feeling quite ignorant here...last year I bought my son 9735 Robotics Discovery Set for Christmas. This year, since I just can't let cheap Lego sit on a shelf ;-) I picked up 9730 RoboSports,9732 Extreme Creatures and 9736 Exploration Mars. Those (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: Trigonometry and NQC
|
|
Thank you for these posts! This idea of creating a table of arctangents is just what I need. I'll let everyone know how it works after I redesign the racer. (The prototype, designed for speed, experienced a significant mechanical shock when it (...) (25 years ago, 14-Dec-01, to lugnet.robotics.rcx.nqc)
|
| |
 | | Re: I'm not into robotics myself but........
|
|
(...) That's right, its a tower, three bricks wide. The bricks are rectangular, three to a layer, each layer is orientated 90 degrees to the one before. (...) It's not really like the tower's of hanoi as the bricks you remove have other bricks (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: E-Zine for LEGO Robotics
|
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I would be very interested. Let me know if you need help. :) Q (...) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see (URL) PGP SIGNATURE----- (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | Re: I'm not into robotics myself but........
|
|
"Steven Lane" <steveroblane@aol.com> wrote in message news:GoBD4y.F5t@lugnet.com... (...) could (...) required (...) in (...) I (...) and (...) That is such a clever idea. Wow... I love it! I can't quite remember how to play Jenga. Do the players (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|
| |
 | | I'm not into robotics myself but........
|
|
Wouldn't it be cool if someone built a robot (Lego or otherwise) that could play Jenga. It would need sensetive devices to determine the force required to withdraw a block. It would then have to build up a model of the tower in memory to enable it (...) (25 years ago, 14-Dec-01, to lugnet.robotics)
|