|
In lugnet.cad.dev, Kevin L. Clague wrote:
Hi Kevin,
> When you say unofficials and custom folders, what are you thinking? Since it
> uses ldglite, there are some rederer features I do not have control over.
I was refering to the use of unofficial and custom parts and the possibilities
to include them into BI without the need to store them in the <LDRAWDIR>Parts
folder or include them in Parts.lst.
w.
|
|
|
In lugnet.cad.dev, Willy Tschager wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
>
> Hi Kevin,
>
> > When you say unofficials and custom folders, what are you thinking? Since it
> > uses ldglite, there are some rederer features I do not have control over.
>
> I was refering to the use of unofficial and custom parts and the possibilities
> to include them into BI without the need to store them in the <LDRAWDIR>Parts
> folder or include them in Parts.lst.
>
> w.
You are more knowledgable on this topic than I am. As far as the assembly
images go, at least for now I'm at the mercy of LDGlite. I've made good use of
the superb document and specifications on LDraw.org. I want to thank all
involved in updating the specifications and website.
I did not find any "official" specification for alternate pathing of parts. I'm
very interested in implementing the standard, or the defacto standard, if I knew
where to find an explanation.
In PLI's, LPub displays the parts color name (from LDConfig), the part number
(yes, even on the Mac version Allan!), and the part title. Currently I get
these titles from PARTS.LST, but that is not sufficient, and it is a short
sighted implementation.
I also get part length from the titles, so supporting unofficials is important.
I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
getting LPub going there. I know it is unix (which I know very well), but I did
not find make or the gcc tools (which I also know very well) using find.
I'm antsy to get going there. Any ideas on where to get started?
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
> getting LPub going there. I know it is unix (which I know very well), but I did
> not find make or the gcc tools (which I also know very well) using find.
>
> I'm antsy to get going there. Any ideas on where to get started?
I think those and other development tools are available as an optional install
from your system DVD, if they're not already present on the machine.
Jim
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> In lugnet.cad.dev, Willy Tschager wrote:
> > In lugnet.cad.dev, Kevin L. Clague wrote:
> >
> > Hi Kevin,
> >
> > > When you say unofficials and custom folders, what are you thinking? Since it
> > > uses ldglite, there are some rederer features I do not have control over.
> >
> > I was refering to the use of unofficial and custom parts and the possibilities
> > to include them into BI without the need to store them in the <LDRAWDIR>Parts
> > folder or include them in Parts.lst.
> >
> > w.
>
> You are more knowledgable on this topic than I am. As far as the assembly
> images go, at least for now I'm at the mercy of LDGlite. I've made good use of
> the superb document and specifications on LDraw.org. I want to thank all
> involved in updating the specifications and website.
>
> I did not find any "official" specification for alternate pathing of parts. I'm
> very interested in implementing the standard, or the defacto standard, if I knew
> where to find an explanation.
>
> In PLI's, LPub displays the parts color name (from LDConfig), the part number
> (yes, even on the Mac version Allan!), and the part title. Currently I get
> these titles from PARTS.LST, but that is not sufficient, and it is a short
> sighted implementation.
>
> I also get part length from the titles, so supporting unofficials is important.
>
> I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
> getting LPub going there. I know it is unix (which I know very well), but I did
> not find make or the gcc tools (which I also know very well) using find.
>
> I'm antsy to get going there. Any ideas on where to get started?
>
> Kevin
LDView and MLCad shows a way for solving this issue.
In the MLCad.ini you can define alternate search path for parts, so you do not
have to mix official and unofficial parts.
Also LDView has the possibility to search in different directories.
cu
mikeheide
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> I did not find any "official" specification for alternate pathing of parts. I'm
> very interested in implementing the standard, or the defacto standard, if I knew
> where to find an explanation.
The LSC voted on that, and officially declined to specify an official location
for unofficial parts.
> I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
> getting LPub going there. I know it is unix (which I know very well), but I did
> not find make or the gcc tools (which I also know very well) using find.
You have to install the dev tools from the OS CD (DVD?) that came with your Mac.
They aren't installed by default (which is probably a wise choice on Apple's
part).
> I'm antsy to get going there. Any ideas on where to get started?
Once you've installed the dev tools, you'll have all the command line tools you
expect. Having said that, qmake on QT for Mac actually generates an XCode
project by default instead of a makefile, and I'd recommend just going with
that. I can send you the .pro file (input for qmake) that I created from the
source tree you sent me if you want (unless I already did).
--Travis
|
|
|
In lugnet.cad.dev, Michael Heidemann wrote:
> LDView and MLCad shows a way for solving this issue.
> In the MLCad.ini you can define alternate search path for parts, so you do not
> have to mix official and unofficial parts.
> Also LDView has the possibility to search in different directories.
Additionally, LDView is hard-coded to look in the <LDrawDir>/Unofficial/Parts
and <LDrawDir>/Unofficial/p directories when it doesn't find a part in its
search path. It then attempts to download unofficial parts from the part
tracker into that directory if it can't find the part (assuming the user hasn't
disabled this feature).
It could be argued that the user should be able to configure where unofficial
parts get downloaded to, but I'm not sure I'll ever implement that. The way it
is now basically produces a de-facto standard for anyone using LDView, and
adding a configuration option for this would defeat that.
As it happens, BrickSmith on the Mac has these directories in its search path
also (which was purely coincidental; Allen and I didn't talk about it, and
neither of us was aware of the other's use of that directory at the time we did
our implementation).
Willy has a tutorial and sample MLCad.ini file that sets up MLCad to look in
these Unofficial directories.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
> > I did not find any "official" specification for alternate pathing of parts. I'm
> > very interested in implementing the standard, or the defacto standard, if I knew
> > where to find an explanation.
>
> The LSC voted on that, and officially declined to specify an official location
> for unofficial parts.
>
>
> > I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
> > getting LPub going there. I know it is unix (which I know very well), but I did
> > not find make or the gcc tools (which I also know very well) using find.
>
> You have to install the dev tools from the OS CD (DVD?) that came with your Mac.
> They aren't installed by default (which is probably a wise choice on Apple's
> part).
>
>
> > I'm antsy to get going there. Any ideas on where to get started?
>
> Once you've installed the dev tools, you'll have all the command line tools you
> expect. Having said that, qmake on QT for Mac actually generates an XCode
> project by default instead of a makefile, and I'd recommend just going with
> that. I can send you the .pro file (input for qmake) that I created from the
> source tree you sent me if you want (unless I already did).
>
> --Travis
Hi Travis,
Thanks for the help. I have a .pro from Orion. I have to update it, because
the list of files has changed, but that should be straight forward.
Thank you very much,
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> Thanks for the help. I have a .pro from Orion. I have to update it, because
> the list of files has changed, but that should be straight forward.
>
> Thank you very much,
You're welcome. Can you verify that you got my email messages regarding the
source tree you sent me? I never got any responses to the messages I sent you,
and I want to make sure they got through.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
> > Thanks for the help. I have a .pro from Orion. I have to update it, because
> > the list of files has changed, but that should be straight forward.
> >
> > Thank you very much,
>
> You're welcome. Can you verify that you got my email messages regarding the
> source tree you sent me? I never got any responses to the messages I sent you,
> and I want to make sure they got through.
>
> --Travis
Hi Travis,
I did not get any emails from you about the code tree. Would you please try
again?
Thanks,
Kevin
|
|
|
In lugnet.cad.dev, Michael Heidemann wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
> > In lugnet.cad.dev, Willy Tschager wrote:
> > > In lugnet.cad.dev, Kevin L. Clague wrote:
> > >
> > > Hi Kevin,
> > >
> > > > When you say unofficials and custom folders, what are you thinking? Since it
> > > > uses ldglite, there are some rederer features I do not have control over.
> > >
> > > I was refering to the use of unofficial and custom parts and the possibilities
> > > to include them into BI without the need to store them in the <LDRAWDIR>Parts
> > > folder or include them in Parts.lst.
> > >
> > > w.
> >
> > You are more knowledgable on this topic than I am. As far as the assembly
> > images go, at least for now I'm at the mercy of LDGlite. I've made good use of
> > the superb document and specifications on LDraw.org. I want to thank all
> > involved in updating the specifications and website.
> >
> > I did not find any "official" specification for alternate pathing of parts. I'm
> > very interested in implementing the standard, or the defacto standard, if I knew
> > where to find an explanation.
> >
> > In PLI's, LPub displays the parts color name (from LDConfig), the part number
> > (yes, even on the Mac version Allan!), and the part title. Currently I get
> > these titles from PARTS.LST, but that is not sufficient, and it is a short
> > sighted implementation.
> >
> > I also get part length from the titles, so supporting unofficials is important.
> >
> > I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
> > getting LPub going there. I know it is unix (which I know very well), but I did
> > not find make or the gcc tools (which I also know very well) using find.
> >
> > I'm antsy to get going there. Any ideas on where to get started?
> >
> > Kevin
>
> LDView and MLCad shows a way for solving this issue.
> In the MLCad.ini you can define alternate search path for parts, so you do not
> have to mix official and unofficial parts.
> Also LDView has the possibility to search in different directories.
>
> cu
> mikeheide
I understand and respect wisdom of the the LSC's decision to not define where to
store unofficial parts.
I was wondering if the LSC would consider defining how one defines the paths to
unofficial directories? At least that would give us some commonality to the
solution of unofficial parts.
Respectfully,
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
|
In PLIs, LPub displays the parts color name (from LDConfig), the part number
(yes, even on the Mac version Allan!), and the part title. Currently I get
these titles from PARTS.LST, but that is not sufficient, and it is a short
sighted implementation.
|
Is PARTS.LST the file that gets generated by some DOS utility in the original
LDraw distribution? You cant rely on that being present. Not being able to rely
on a DOS utility, Bricksmith reads the part library and generates its own XML
parts list; I assume other programs do something similar.
|
I got a Mac mini yesterday, so Im at the bottom of the learning curve on
getting LPub going there. I know it is unix (which I know very well), but I
did not find make or the gcc tools (which I also know very well) using find.
Im antsy to get going there. Any ideas on where to get started?
|
Congratulations! This is wonderful news for Mac LDraw users. I have fielded
numerous requests asking for an instruction-generation tool in Bricksmith, and
Ive always been ashamed to respond that there isnt one, never will be, and the
process of doing it manually is probably too hard for them to figure out. I
eagerly anticipate being able to direct people to a real solution. Thanks for
making the capital investment to support us!
As others have noted, in order to get the developer tools on your Mac, you need
to install the Xcode Tools package. It is found somewhere on your Mac OS
installer DVD. That installs the gcc toolchain, Apples graphical IDE, and lots
of other stuff.
Allen
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> As it happens, BrickSmith on the Mac has these directories in its search path
> also (which was purely coincidental; Allen and I didn't talk about it, and
> neither of us was aware of the other's use of that directory at the time we did
> our implementation).
>
> Willy has a tutorial and sample MLCad.ini file that sets up MLCad to look in
> these Unofficial directories.
Hi Kevin,
I bet you've already found what Travis's talking about; if not the tutorial can
be found here:
http://www.holly-wood.it/mlcad/ini-en.html#scan
Initially I used <LDRAWDIR>Unofficial_Parts since MLCad was the first prog
supporting unofficial parts but agreed with Travis and Allen to change it to
<LDRAWDIR>Unofficial after the LSC had voted down the proposal.
w.
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> Hi Travis,
> I did not get any emails from you about the code tree. Would you please try
> again?
Sorry to everyone else for having this on a public forum, but since Kevin
doesn't appear to be receiving my emails, I feel that I need to post this here.
I just resent all the messages I've sent you in the past month or so. I
strongly suspect that they're all going to end up in your spam box; please check
that, and do what you can (if anything on yahoo) to stop getting them tagged as
spam. If you don't get them, or you can't get my address marked as non-spam,
you're probably going to have to send me another email address I can use to send
you stuff. I could try sending from another address also, I suppose.
--Travis
|
|
|
In lugnet.cad.dev, Allen Smith wrote:
|
In lugnet.cad.dev, Kevin L. Clague wrote:
|
In PLIs, LPub displays the parts color name (from LDConfig), the part
number (yes, even on the Mac version Allan!), and the part title. Currently
I get these titles from PARTS.LST, but that is not sufficient, and it is a
short sighted implementation.
|
Is PARTS.LST the file that gets generated by some DOS utility in the original
LDraw distribution? You cant rely on that being present. Not being able to
rely on a DOS utility, Bricksmith reads the part library and generates its
own XML parts list; I assume other programs do something similar.
|
As will LPub before it is made available to the public. Thus the comment about
short sighted. Now that I have an example on what to do, Ill implement that
instead. There is one class that will have to be changed, and no one else needs
to know the difference.
|
|
I got a Mac mini yesterday, so Im at the bottom of the learning curve on
getting LPub going there. I know it is unix (which I know very well), but I
did not find make or the gcc tools (which I also know very well) using find.
Im antsy to get going there. Any ideas on where to get started?
|
Congratulations! This is wonderful news for Mac LDraw users. I have fielded
numerous requests asking for an instruction-generation tool in Bricksmith,
and Ive always been ashamed to respond that there isnt one, never will be,
and the process of doing it manually is probably too hard for them to figure
out. I eagerly anticipate being able to direct people to a real solution.
Thanks for making the capital investment to support us!
|
It turns out that I get an employee discount through work, even though I dont
work for Apple. Who could resist?
Now, if someone would make a platform independent editor, wed be in fantastic
shape!
|
As others have noted, in order to get the developer tools on your Mac, you
need to install the Xcode Tools package. It is found somewhere on your Mac OS
installer DVD. That installs the gcc toolchain, Apples graphical IDE, and
lots of other stuff.
Allen
|
Im grateful for all the help.
Ive gotten LPub to build successfully, and am working on interfacing to
renderers. On vidoze I used ldglite originally on LPub 4, and all was well.
Don Heyse had added some features to ldglite to make it easier for LPub to work
with, by adding some of the L3P camera lens and positioning options, and getting
it to render offscreen. Today, the Mac version of ldglite does not have these
features.
LPub 2 supports LDView, which I hadnt gotten around to doing with LPub 4 until
last night. Travis was nice enough to make the L3P camera command line option
changes to LDView a few years back. Ive not got LDView and LPub 4 working well
on the Mac yet, but that will be just a matter of debug time.
Im very excited.
Kevin
|
|
|
In lugnet.cad.dev, Willy Tschager wrote:
> In lugnet.cad.dev, Travis Cobbs wrote:
> > As it happens, BrickSmith on the Mac has these directories in its search path
> > also (which was purely coincidental; Allen and I didn't talk about it, and
> > neither of us was aware of the other's use of that directory at the time we did
> > our implementation).
> >
> > Willy has a tutorial and sample MLCad.ini file that sets up MLCad to look in
> > these Unofficial directories.
>
> Hi Kevin,
>
> I bet you've already found what Travis's talking about; if not the tutorial can
> be found here:
>
> http://www.holly-wood.it/mlcad/ini-en.html#scan
>
> Initially I used <LDRAWDIR>Unofficial_Parts since MLCad was the first prog
> supporting unofficial parts but agreed with Travis and Allen to change it to
> <LDRAWDIR>Unofficial after the LSC had voted down the proposal.
>
> w.
Thanks Willy! I'll work on this very soon.
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
|
Ive gotten LPub to build successfully, and am working on interfacing to
renderers. On vidoze I used ldglite originally on LPub 4, and all was well.
Don Heyse had added some features to ldglite to make it easier for LPub to
work with, by adding some of the L3P camera lens and positioning options, and
getting it to render offscreen. Today, the Mac version of ldglite does not
have these features.
|
Yeah, gotta work on that... But hey, the kids just got a macbook! And, as
of yesterday, it has a sneaky ssh login just for me so I can soak up some of the
idle cycles from across the living room.
But...my notes on libpng for OS-X are about 5 years old. Is
this the current recommended way to
get it? If so, what does the code patch do? Is the patch still needed? I ran
the script without patching and was able to build an executable with the
resulting libpng, but I didnt actually try the png functions yet, because...
I havent fetched the LDRAW parts library yet. So whats the best way to
get the parts for the Mac -- With bricksmith? In ldview? Straight from
ldraw.org? -- and where do you folks put the LDRAWDIR on the MAC these days?
Have fun,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
But...my notes on libpng for OS-X are about 5 years old. Is
this the current recommended way
to get it? If so, what does the code patch do? Is the patch still needed?
I ran the script without patching and was able to build an executable with
the resulting libpng, but I didnt actually try the png functions yet,
because...
|
How about I send you a universal binary of a static libpng? (If I remember
correctly, it was a real pain to make.)
|
I havent fetched the LDRAW parts library yet. So whats the best way to
get the parts for the Mac -- With bricksmith? In ldview? Straight from
ldraw.org? -- and where do you folks put the LDRAWDIR on the MAC these days?
|
I think I got mine via BrickSmith, which is kind of sad, really, but I just
checked, and LDView will happily download the official library on the Mac if you
just run it and open its sample file.
--Travis
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
I havent fetched the LDRAW parts library yet. So whats the best way to
get the parts for the Mac -- With bricksmith? In ldview?
|
One of those.
No. They dont distribute the full library; you would have to merge together all
the updates with the original LDraw DOS package. Not fun.
|
and where do you folks put the LDRAWDIR on the MAC these days?
|
Wherever you want it. If Bricksmith is installed, you can find out where the
LDraw folder is by issuing the following terminal command:
defaults read com.AllenSmith.Bricksmith LDraw Path
On Bricksmiths first launch, it automatically searches in /Applications,
/Library, ~/Library, and directories relative to Bricksmith.app itself
(which is where it usually finds it).
Allen
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
How about I send you a universal binary of a static libpng? (If I remember
correctly, it was a real pain to make.)
|
I havent fetched the LDRAW parts library yet. So whats the best way to
get the parts for the Mac -- With bricksmith? In ldview? Straight from
ldraw.org? -- and where do you folks put the LDRAWDIR on the MAC these days?
|
I think I got mine via BrickSmith, which is kind of sad, really, but I just
checked, and LDView will happily download the official library on the Mac if
you just run it and open its sample file.
|
Thanks guys for all the help. I grabbed BrickSmith and moved the ldraw
folder that came with it to /Library. I wanted both anyhow so it seemed
to be the way to go. Then I built a new (universal?) ldglite with your
static libpng and some patches to render offscreen via the carbon fns. It
didnt work from an ssh login (carbon is forbidden), but when I logged
locally I got a png file without opening a graphics window. Cool!
Kevin, if you want to test it I put a beta of just the executable
here.
Enjoy,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
How about I send you a universal binary of a static libpng? (If I remember
correctly, it was a real pain to make.)
|
I havent fetched the LDRAW parts library yet. So whats the best way to
get the parts for the Mac -- With bricksmith? In ldview? Straight from
ldraw.org? -- and where do you folks put the LDRAWDIR on the MAC these
days?
|
I think I got mine via BrickSmith, which is kind of sad, really, but I just
checked, and LDView will happily download the official library on the Mac if
you just run it and open its sample file.
|
Thanks guys for all the help. I grabbed BrickSmith and moved the ldraw
folder that came with it to /Library. I wanted both anyhow so it seemed
to be the way to go. Then I built a new (universal?) ldglite with your
static libpng and some patches to render offscreen via the carbon fns. It
didnt work from an ssh login (carbon is forbidden), but when I logged
locally I got a png file without opening a graphics window. Cool!
Kevin, if you want to test it I put a beta of just the executable
here.
Enjoy,
Don
|
Hi Don,
It worked!
Now I just have to figure out how to get my main menu and popup menus to work
on the Mac from Qt!
Thanks!
Kevin
|
|
|
In lugnet.cad.dev, Allen Smith wrote:
|
In lugnet.cad.dev, Kevin L. Clague wrote:
|
In PLIs, LPub displays the parts color name (from LDConfig), the part
number (yes, even on the Mac version Allan!), and the part title. Currently
I get these titles from PARTS.LST, but that is not sufficient, and it is a
short sighted implementation.
|
Is PARTS.LST the file that gets generated by some DOS utility in the original
LDraw distribution? You cant rely on that being present. Not being able to
rely on a DOS utility, Bricksmith reads the part library and generates its
own XML parts list; I assume other programs do something similar.
|
snip
LPub does not need a total list of parts, so it doesnt have to scan all the
paths. It does need the titles of parts that are used however. Since parts.lst
is a precomupted list of some of them, LPub reads it and puts the contents in an
associative array.
If we need the title for a part not in the array, we check the list of paths
(which now includes Unofficial/Parts, et. al.). If found, the part file is
opened, then title extracted and thrown in the associative array.
So, Willy, LPub supports the unofficial parts path stuff, including Helpers, and
Custom Parts. Do we want to add Development/Parts Development/P?
Development/P48?
So, this leads to a few more questions......
Allen,
You know those obtuse MLCad metas we talked about, like rotation step, buffer
exchange, GHOST? Sounds because LPub supports these, you might want to add them
to BrickSmith.
Don,
Did you get a chance to add the unofficial path support to LDGLite?
Kevin
|
|
|
In lugnet.cad.dev, Jim DeVona wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
>
> > I got a Mac mini yesterday, so I'm at the bottom of the learning curve on
> > getting LPub going there. I know it is unix (which I know very well), but I did
> > not find make or the gcc tools (which I also know very well) using find.
> >
> > I'm antsy to get going there. Any ideas on where to get started?
>
> I think those and other development tools are available as an optional install
> from your system DVD, if they're not already present on the machine.
>
> Jim
So, popup menus work, but my main menu does not show up.
I found this information on trolltech:
http://doc.trolltech.com/3.3/mac-differences.html
but I don't know what it means to run out of a bundle.
Qmake created
lpub.app
Contents
Info.plist
MacOS
PkgInfo
Info.plist contains
<?xml version "1.0" "file://localhost/System/Library/DTDs/Property/List.dtd>
<plist version="0.9">
<dict>
<key>CFBundleIconFile</key>
<string></string>
<key>CFBundlePackageType</key>
<string>APPL</string>
<key>CFBundleGetInfoString</key>
<string>Created by Qt/QMake></string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleExecutable</key>
<string>lpub</string>
<key>NOTE</key>
<string>Please, do NOT change this file -- It was generated buy
Qt/Qmake.</string>
</dict>
</plist>
PkgInfo contains
APPL????
It would seem these files are related to the issue, but I've got no idea how to
change them to use widgets.app as indicated by trolltech.
Any ideas?
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
|
In lugnet.cad.dev, Allen Smith wrote:
|
In lugnet.cad.dev, Kevin L. Clague wrote:
|
In PLIs, LPub displays the parts color name (from LDConfig), the part
number (yes, even on the Mac version Allan!), and the part title.
Currently I get these titles from PARTS.LST, but that is not sufficient,
and it is a short sighted implementation.
|
Is PARTS.LST the file that gets generated by some DOS utility in the
original LDraw distribution? You cant rely on that being present. Not
being able to rely on a DOS utility, Bricksmith reads the part library
and generates its own XML parts list; I assume other programs do
something similar.
|
LPub does not need a total list of parts, so it doesnt have to scan all the
paths. It does need the titles of parts that are used however. Since
parts.lst is a precomupted list of some of them, LPub reads it and puts the
contents in an associative array.
|
I believe a MAC version mklist utility used to generate the PARTS.LST
file comes bundled with the OS-X version of ldglite. Source code is
available, so anyone can build it on whatever platform they like.
There may be better ways to build the list, but PARTS.LST should always
be available as the least common denominator.
|
Don,
Did you get a chance to add the unofficial path support to LDGLite?
|
Not yet, but soon...
Don
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> So, popup menus work, but my main menu does not show up.
OK, that's very very strange. LDView's main menu "just worked" (mostly). I had
to do some fixups to make it fit the Mac style, but it was perfectly usable
without those. It "just works" when compiled with QT 4 also.
> I found this information on trolltech:
>
> http://doc.trolltech.com/3.3/mac-differences.html
It's not talking about the menu you think it's talking about. The "Application
Menu" on a Mac isn't the application's menu, it's the first item in the
application's menu, with a title that matches the application name. The
"Bundle" they're referring to is just the app wrapper (the LPub.app dir).
--Travis
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> So, popup menus work, but my main menu does not show up.
Just out of curiosity, what IS in the menu bar when the LPub window is the
current active window?
--Travis
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> So, popup menus work, but my main menu does not show up.
>
> I found this information on trolltech:
>
> http://doc.trolltech.com/3.3/mac-differences.html
>
> but I don't know what it means to run out of a bundle.
>
> Qmake created
>
> lpub.app
> Contents
> Info.plist
> MacOS
> PkgInfo
>
> Info.plist contains
>
> <?xml version "1.0" "file://localhost/System/Library/DTDs/Property/List.dtd>
> <plist version="0.9">
> <dict>
> <key>CFBundleIconFile</key>
> <string></string>
> <key>CFBundlePackageType</key>
> <string>APPL</string>
> <key>CFBundleGetInfoString</key>
> <string>Created by Qt/QMake></string>
> <key>CFBundleSignature</key>
> <string>????</string>
> <key>CFBundleExecutable</key>
> <string>lpub</string>
> <key>NOTE</key>
> <string>Please, do NOT change this file -- It was generated buy
> Qt/Qmake.</string>
> </dict>
> </plist>
>
> PkgInfo contains
>
> APPL????
>
> It would seem these files are related to the issue, but I've got no idea how to
> change them to use widgets.app as indicated by trolltech.
I'm not too familiar with Qt or Trolltech's recommendations, so maybe someone
else can help work out what you need to do. The Mac version of LDView 3.2 is a
Qt app, so maybe Travis can get you started.
The application bundle structure applies to most apps, though, so if you're not
familiar with that yet, take a look at some other applications to see how it
works. Right-click an application and select "Show Package Contents" - you'll
see the same sort of directory structure. Contents/Info.plist provides all sorts
of meta-data about the program
(http://developer.apple.com/documentation/MacOSX/Conceptual/BPRuntimeConfig/Articles/PListKeys.html),
Contents/MacOS typically contains the actual executable, and Contents/Resources
holds pretty much anything else - icons, help, etc. (Although Qmake presumably
sets all this up for you.)
The CFBundleExecutable property in Info.plist identifies the executable in
Contents/MacOS that runs when you launch the application.
Jim
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
> > So, popup menus work, but my main menu does not show up.
>
> Just out of curiosity, what IS in the menu bar when the LPub window is the
> current active window?
>
> --Travis
All I get is a single menu item in the menu bar above the desktop. It says
LPub. The contents of the menu are not from LPub though.
I've built LPub using QMainWindow. It has a function that returns a pointer to
the menuBar(). I build all my main menus using that.
Maybe you're doing things differently?
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> All I get is a single menu item in the menu bar above the desktop. It says
> LPub. The contents of the menu are not from LPub though.
>
> I've built LPub using QMainWindow. It has a function that returns a pointer to
> the menuBar(). I build all my main menus using that.
>
> Maybe you're doing things differently?
LDView has its main menu inside the .ui file for the main window. It was
created and is maintained in QT Designer. Take a look at LDView.ui to see if
there's anything obviously different there.
--Travis
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> So, Willy, LPub supports the unofficial parts path stuff, including Helpers,
> and Custom Parts. Do we want to add Development/Parts Development/P?
> Development/P48?
Perfect - many thx! Don't think there is any need for "development" but
"<LDRAWDIR>LSynth" wouldn't hurt. You could then store all constraints and
synthesis parts in that folder without the need to mix them with the official
parts or rebuild Parts.lst, while I, as maintainer of the MLCad.ini, could
include a search path and scan for LSynth by default.
w.
|
|
|
In lugnet.cad.dev, Willy Tschager wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
> > So, Willy, LPub supports the unofficial parts path stuff, including Helpers,
> > and Custom Parts. Do we want to add Development/Parts Development/P?
> > Development/P48?
>
> Perfect - many thx! Don't think there is any need for "development" but
> "<LDRAWDIR>LSynth" wouldn't hurt. You could then store all constraints and
> synthesis parts in that folder without the need to mix them with the official
> parts or rebuild Parts.lst, while I, as maintainer of the MLCad.ini, could
> include a search path and scan for LSynth by default.
>
> w.
I figured that Development would be use by parts authors. I was offering it as
an alternative to D:work_in_progress. LSynth it is.
Kev
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Kevin L. Clague wrote:
> > All I get is a single menu item in the menu bar above the desktop. It says
> > LPub. The contents of the menu are not from LPub though.
> >
> > I've built LPub using QMainWindow. It has a function that returns a pointer to
> > the menuBar(). I build all my main menus using that.
> >
> > Maybe you're doing things differently?
>
> LDView has its main menu inside the .ui file for the main window. It was
> created and is maintained in QT Designer. Take a look at LDView.ui to see if
> there's anything obviously different there.
>
> --Travis
Hmmm..... one major difference is that I didn't use the designer for any of my
GUI.
I wonder if that is why things are different.
Kevin
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> Hmmm..... one major difference is that I didn't use the designer for any of my
> GUI.
>
> I wonder if that is why things are different.
I'm guessing it's related, but there's presumably something you did that QT
Designer doesn't do, or vice versa. Obviously QT is designed so that apps can
be written completely without using QT Designer.
One thing you might do is create a QMainWindow subclass in QT Designer, add menu
items to that, then set that as the superclass of your current main window
class. See if the Desinger-designed menu shows up.
To be honest, I would think it would be a lot easier to maintain your main menu
using Designer. If the above test menu shows up, you might consider just doing
that and getting rid of your source-code based menu/action building.
--Travis
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> In lugnet.cad.dev, Travis Cobbs wrote:
> > In lugnet.cad.dev, Kevin L. Clague wrote:
> > > All I get is a single menu item in the menu bar above the desktop. It says
> > > LPub. The contents of the menu are not from LPub though.
> > >
> > > I've built LPub using QMainWindow. It has a function that returns a pointer to
> > > the menuBar(). I build all my main menus using that.
> > >
> > > Maybe you're doing things differently?
> >
> > LDView has its main menu inside the .ui file for the main window. It was
> > created and is maintained in QT Designer. Take a look at LDView.ui to see if
> > there's anything obviously different there.
> >
> > --Travis
>
> Hmmm..... one major difference is that I didn't use the designer for any of my
> GUI.
>
> I wonder if that is why things are different.
>
> Kevin
problem fixed.
extern void qt_mac_set_native_menubar(bool);
qt_mac_set_native_menubar(true);
Kevin
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
to be the way to go. Then I built a new (universal?) ldglite with your
static libpng and some patches to render offscreen via the carbon fns. It
didnt work from an ssh login (carbon is forbidden), but when I logged
locally I got a png file without opening a graphics window. Cool!
|
If you used my code as an example for Core GL setup, then the error was due to a
bug in my code. If not, put the following in your CGLPixelFormatAttribute
array, and it should work even via ssh:
CGLPixelFormatAttribute attrs[] =
{
kCGLPFADepthSize, (CGLPixelFormatAttribute)24,
kCGLPFAColorSize, (CGLPixelFormatAttribute)24,
kCGLPFAAlphaSize, (CGLPixelFormatAttribute)8,
kCGLPFAStencilSize, (CGLPixelFormatAttribute)8,
kCGLPFAAccelerated,
kCGLPFAPBuffer,
kCGLPFARemotePBuffer,
(CGLPixelFormatAttribute)0
};
The last setting (kCGLPFARemotePBuffer) is the important one for remote
rendering. Note, thought, that you dont want that setting set when saving a
file from the UI. I suspect that you can skip the kCGLPFAAccelerated entry.
I updated LDView, and it now works fine remotely via ssh from an account
different than the logged in user (and probably when nobody is logged in; I
cant test that right now).
--Travis
|
|
|
In lugnet.cad.dev, Kevin L. Clague wrote:
> problem fixed.
>
> extern void qt_mac_set_native_menubar(bool);
> qt_mac_set_native_menubar(true);
>
> Kevin
OK, now that's just plain weird. Glad to hear it's fixed, though.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Don Heyse wrote:
> > to be the way to go. Then I built a new (universal?) ldglite with your
> > static libpng and some patches to render offscreen via the carbon fns. It
> > didn't work from an ssh login (carbon is forbidden), but when I logged
> > locally I got a png file without opening a graphics window. Cool!
>
> If you used my code as an example for Core GL setup, then the error was due
> to a bug in my code. If not, put the following in your
> CGLPixelFormatAttribute array, and it should work even via ssh:
>
> | CGLPixelFormatAttribute attrs[] =
> | {
> | kCGLPFADepthSize, (CGLPixelFormatAttribute)24,
> | kCGLPFAColorSize, (CGLPixelFormatAttribute)24,
> | kCGLPFAAlphaSize, (CGLPixelFormatAttribute)8,
> | kCGLPFAStencilSize, (CGLPixelFormatAttribute)8,
> | kCGLPFAAccelerated,
> | kCGLPFAPBuffer,
> | kCGLPFARemotePBuffer,
> | (CGLPixelFormatAttribute)0
> | };
>
> The last setting (kCGLPFARemotePBuffer) is the important one for remote
> rendering. Note, thought, that you don't want that setting set when
> saving a file from the UI. I suspect that you can skip the
> kCGLPFAAccelerated entry.
>
> I updated LDView, and it now works fine remotely via ssh from an account
> different than the logged in user (and probably when nobody is logged in; I
> can't test that right now).
Actually it turned out that despite the warning message my settings
did work from a remote ssh login as a different user. The old AGL code,
while it worked locally (that was a surprise), did not work remotely and
produced the same warning message:
_RegisterApplication(), FAILED TO establish the default connection to the
WindowServer, _CGSDefaultConnection() is NULL.
When I searched for that I found some dev notes for daemon developnemt
that said carbon and opengl calls were not allowed for this sort of thing.
Since it warned me but still worked I wonder if this was more of a
problem with older versions of OS-X.
I took a peek at your code, but pbuffers make me nervous. I sorta
remember a Dev Connection table that showed them as unsupported on
some of the older Macs. (Like before 10.3)
So I skipped the pbuffer and went straight to ordinary offscreen
memory for the absolute lowest performance. ;-) I only use the stencil
buffer for editing mode, and I forgot to ask for alpha, but got it
anyhow with this setup:
CGLPixelFormatAttribute attribs[] = {
kCGLPFAOffScreen,
kCGLPFAColorSize, 32,
kCGLPFADepthSize, 32,
0};
Have fun,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
Kevin, if you want to test it I put a beta of just the executable
here.
|
Apparently this is working for others, but when I run it (on an original MacBook
in OS 10.4), all I get is a bus error. Did you compile it as a Leopard app?
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
In lugnet.cad.dev, Don Heyse wrote:
|
Kevin, if you want to test it I put a beta of just the executable
here.
|
Apparently this is working for others, but when I run it (on an original
MacBook in OS 10.4), all I get is a bus error. Did you compile it as a
Leopard app?
|
Err, I rushed it and sorta botched the build. So a few files got built
with no PPC code. I rebuilt it, but didnt get a chance to borrow an
older machine to test it on yet.
Hey, maybe (probably) you know this. Whats involved in supporting
a G3, or say OS 10.3? I dont know my way around the compiler switches
well enough yet to turn off altivec or use the older libraries.
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
Err, I rushed it and sorta botched the build. So a few files got built
with no PPC code. I rebuilt it, but didnt get a chance to borrow an
older machine to test it on yet.
|
Actually, I dont have a PPC Mac, just the previous OS version. I believe that
if you dont get everything right for the universal stuff, it will give you an
error at link time. I know thats what it does to me if any of the libraries
arent universal and I try to do a universal build.
|
Hey, maybe (probably) you know this. Whats involved in supporting
a G3, or say OS 10.3? I dont know my way around the compiler switches
well enough yet to turn off altivec or use the older libraries.
|
No idea. I know how to set up the OS setting in XCode, but I dont know
off-hand even how to do that in a Makefile.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
In lugnet.cad.dev, Don Heyse wrote:
|
Err, I rushed it and sorta botched the build. So a few files got built
with no PPC code. I rebuilt it, but didnt get a chance to borrow an
older machine to test it on yet.
|
Actually, I dont have a PPC Mac, just the previous OS version.
|
Thats interesting. I built it on a new laptop with the version of XCode
that comes with leopard. However I just added the arch targets to the
old makefile (but missed one of the libraries). So I guess the default
is to target leopard only. I suppose I should try to build from an
XCode project and see if its easier to target older OS versions and
CPUs with that.
|
I believe
that if you dont get everything right for the universal stuff, it will
give you an error at link time. I know thats what it does to me if any of
the libraries arent universal and I try to do a universal build.
|
It let me link in an X86 only lib without an error. Maybe there was a
warning, I didnt pay too much attention. I can imagine reasons why
you *might* want a special lib thats only called from the X86 code.
|
|
Hey, maybe (probably) you know this. Whats involved in supporting
a G3, or say OS 10.3? I dont know my way around the compiler switches
well enough yet to turn off altivec or use the older libraries.
|
No idea. I know how to set up the OS setting in XCode, but I dont know
off-hand even how to do that in a Makefile.
|
I found some documentation, but I printed it and dont have it on hand
right now. It sure looks easier to do from the XCode gui though.
So whats the oldest, junkiest Mac thats known to run the LDView executable?
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
So whats the oldest, junkiest Mac thats known to run the LDView executable?
|
No idea. Whatever it is, it needs Tiger, though, since LDView is built to
require Tiger. It presumably needs a G4.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
In lugnet.cad.dev, Don Heyse wrote:
|
So whats the oldest, junkiest Mac thats known to run the LDView
executable?
|
No idea. Whatever it is, it needs Tiger, though, since LDView is built to
require Tiger. It presumably needs a G4.
|
For what its worth, Tiger will run on a 300 MHz G3. While it certainly wasnt
fast, I dont recall ever encountering any software that simply said I need a
G4. Thats not to say theres no reason why such software couldnt or shouldnt
exist, of course.
Jim
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
In lugnet.cad.dev, Don Heyse wrote:
|
Err, I rushed it and sorta botched the build. So a few files got built
with no PPC code. I rebuilt it, but didnt get a chance to borrow an
older machine to test it on yet.
|
Actually, I dont have a PPC Mac, just the previous OS version.
|
Thats interesting. I built it on a new laptop with the version of XCode
that comes with leopard. However I just added the arch targets to the
old makefile (but missed one of the libraries). So I guess the default
is to target leopard only. I suppose I should try to build from an
XCode project and see if its easier to target older OS versions and
CPUs with that.
|
I believe
that if you dont get everything right for the universal stuff, it will
give you an error at link time. I know thats what it does to me if any of
the libraries arent universal and I try to do a universal build.
|
It let me link in an X86 only lib without an error. Maybe there was a
warning, I didnt pay too much attention. I can imagine reasons why
you *might* want a special lib thats only called from the X86 code.
|
|
Hey, maybe (probably) you know this. Whats involved in supporting
a G3, or say OS 10.3? I dont know my way around the compiler switches
well enough yet to turn off altivec or use the older libraries.
|
No idea. I know how to set up the OS setting in XCode, but I dont know
off-hand even how to do that in a Makefile.
|
I found some documentation, but I printed it and dont have it on hand
right now. It sure looks easier to do from the XCode gui though.
|
Since I already lost this once, Im gonna stash it here just in case.
To compile something that runs on Tiger from a makefile on Leopard add
this:
CFLAGS+= -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk
LDFLAGS+= -isysroot /Developer/SDKs/MacOSX10.4u.sdk
That should make it build and run with the older Tiger sdk and libs.
Add -arch i386 -arch ppc and I should be able to make a universal
binary for 10.4 and up. (I hope)
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
|
Since I already lost this once, Im gonna stash it here just in case.
To compile something that runs on Tiger from a makefile on Leopard add
this:
|
Good idea.
|
CFLAGS+= -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk
LDFLAGS+= -isysroot /Developer/SDKs/MacOSX10.4u.sdk
That should make it build and run with the older Tiger sdk and libs.
Add -arch i386 -arch ppc and I should be able to make a universal
binary for 10.4 and up. (I hope)
|
Ill be happy to be your Tiger test subject, but I can only test Intel.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
|
In lugnet.cad.dev, Don Heyse wrote:
|
Since I already lost this once, Im gonna stash it here just in case.
To compile something that runs on Tiger from a makefile on Leopard add
this:
|
Good idea.
|
CFLAGS+= -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk
LDFLAGS+= -isysroot /Developer/SDKs/MacOSX10.4u.sdk
That should make it build and run with the older Tiger sdk and libs.
Add -arch i386 -arch ppc and I should be able to make a universal
binary for 10.4 and up. (I hope)
|
Ill be happy to be your Tiger test subject, but I can only test Intel.
|
Ok, give this one a try.
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
That one works for LPub. The buffer isnt getting flushed to the screen right.
I have to resize or force a redraw in order. Are you calling CGLFlushDrawable
at the end of your drawing code?
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Don Heyse wrote:
> > Ok, give http://ldglite.sf.net/ldgliteosx1_2_1beta2.zip a try.
>
> That one works for LPub. The buffer isn't getting flushed to the screen
> right. I have to resize or force a redraw in order. Are you calling
> CGLFlushDrawable at the end of your drawing code?
No, I use glfinish(). I've had all sorts of problems over the years
with Apple because I often render in the front buffer to emulate
the various ancient ldlite immediate rendering modes. Does it update
ok when you spin the model with the mouse? I think that's pure back
buffer rendering (at least until you're done spinning). What about using
-n4 on the command line? That's the ldlite command to render the whole
thing before displaying it. It looks like I forced that mode when the gl
render string contains "RADEON 7000", so I must have had problems with
that one too. Really, at this point I should probably give up rendering
in the front buffer except perhaps for editing mode and maybe for the
slow software renderers.
What does ldglite print for GL_VENDOR and GL_RENDERER?
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> In lugnet.cad.dev, Travis Cobbs wrote:
> > In lugnet.cad.dev, Don Heyse wrote:
> > > Ok, give http://ldglite.sf.net/ldgliteosx1_2_1beta2.zip a try.
> >
> > That one works for LPub. The buffer isn't getting flushed to the screen
> > right. I have to resize or force a redraw in order. Are you calling
> > CGLFlushDrawable at the end of your drawing code?
>
> No, I use glfinish(). I've had all sorts of problems over the years
> with Apple because I often render in the front buffer to emulate
> the various ancient ldlite immediate rendering modes. Does it update
> ok when you spin the model with the mouse? I think that's pure back
> buffer rendering (at least until you're done spinning). What about using
> -n4 on the command line? That's the ldlite command to render the whole
> thing before displaying it. It looks like I forced that mode when the gl
> render string contains "RADEON 7000", so I must have had problems with
> that one too. Really, at this point I should probably give up rendering
> in the front buffer except perhaps for editing mode and maybe for the
> slow software renderers.
>
> What does ldglite print for GL_VENDOR and GL_RENDERER?
Sorry about the self reply, but now I'm really curious about this.
I found myself an old G4 EMac with a Geforce2 and OSX Tiger for testing
and everything worked ok. It also worked on an Intel Macbook with
the Intel GMA X3100 graphics. So I guess that means I've got the
universal binary build process down.
Now I just need to fix the display bugs on some systems. I'm guessing
they use ATI chips, but it'd be nice to know for sure. It'd also be nice
to know if the -n4 arg makes it better, because if so I'll make that the default
moving forward.
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> Sorry about the self reply, but now I'm really curious about this.
> I found myself an old G4 EMac with a Geforce2 and OSX Tiger for testing
> and everything worked ok. It also worked on an Intel Macbook with
> the Intel GMA X3100 graphics. So I guess that means I've got the
> universal binary build process down.
Sorry for not responding, but I didn't remember to look at it while I was at
home. I'll try to do so tonight.
> Now I just need to fix the display bugs on some systems. I'm guessing
> they use ATI chips, but it'd be nice to know for sure. It'd also be nice
> to know if the -n4 arg makes it better, because if so I'll make that the default
> moving forward.
Actually, my Intel MacBook (one of the original ones) has Intel motherboard
graphics. Probably a different model than yours, but Intel nonetheless.
--Travis
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> Sorry about the self reply, but now I'm really curious about this.
> I found myself an old G4 EMac with a Geforce2 and OSX Tiger for testing
> and everything worked ok. It also worked on an Intel Macbook with
> the Intel GMA X3100 graphics. So I guess that means I've got the
> universal binary build process down.
Here's my info:
Vendor: Intel Inc.
Renderer: Intel GMA 950 OpenGL Engine
Version: 1.2 APPLE-1.4.56
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Don Heyse wrote:
> > Sorry about the self reply, but now I'm really curious about this.
> > I found myself an old G4 EMac with a Geforce2 and OSX Tiger for testing
> > and everything worked ok. It also worked on an Intel Macbook with
> > the Intel GMA X3100 graphics. So I guess that means I've got the
> > universal binary build process down.
>
> Here's my info:
>
> Vendor: Intel Inc.
> Renderer: Intel GMA 950 OpenGL Engine
> Version: 1.2 APPLE-1.4.56
Hmmm, I guess that's slightly different from the GMA X3100, which
seemed to work for me. If you get a chance, try and run it with
-n4 on the command line. That should render everything in the back
buffer like 99.99% of the opengl programs out there.
Thanks again,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> Hmmm, I guess that's slightly different from the GMA X3100, which
> seemed to work for me. If you get a chance, try and run it with
> -n4 on the command line. That should render everything in the back
> buffer like 99.99% of the opengl programs out there.
The -n4 didn't have any noticeable effect. What exactly does n4 mean. I know
it means "draw to back buffer", but what does the n and the 4 mean?
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Don Heyse wrote:
> > Hmmm, I guess that's slightly different from the GMA X3100, which
> > seemed to work for me. If you get a chance, try and run it with
> > -n4 on the command line. That should render everything in the back
> > buffer like 99.99% of the opengl programs out there.
>
> The -n4 didn't have any noticeable effect.
Arrgh, that's not good. It worked for me whenever I had a problem
like that. I guess I'll have to use the OSX flush function. Are
you by chance using partially transparent windows, or something
fancy like that?
> What exactly does n4 mean. I know it means "draw to back buffer",
> but what does the n and the 4 mean?
It's hooked to an ldlite variable that tracks what level is
being rendered (P=1, Part=2, Model=4, Other=8). Don't ask me what
other means. I think this was documented with the 2.4 release notes
for ldlite, but I lost track of that. I posted the ldlite 2.3
release notes as the ldlite sourceforge web page at some point, but
that doesn't mention it. So I suppose it's possible that I made the
whole thing up myself 6 years ago, but my memory from that time is
gone now.
Have fun,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> In lugnet.cad.dev, Travis Cobbs wrote:
> > The -n4 didn't have any noticeable effect.
>
> Arrgh, that's not good. It worked for me whenever I had a problem
> like that. I guess I'll have to use the OSX flush function. Are
> you by chance using partially transparent windows, or something
> fancy like that?
Nope. It starts out partially under my dock, which I keep on the left. I can't
remember if I ever moved it completely out from under the dock or not, but I'm
pretty sure I did. (As a note, I looked around, and it appears that
HIWindowGetAvailablePositioningBounds is the Carbon API to use to avoid
overlapping the Dock; GLUT REALLY should use that automatically when you ask it
for a maximized window.)
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Don Heyse wrote:
> > In lugnet.cad.dev, Travis Cobbs wrote:
> > > The -n4 didn't have any noticeable effect.
> >
> > Arrgh, that's not good. It worked for me whenever I had a problem
> > like that. I guess I'll have to use the OSX flush function. Are
> > you by chance using partially transparent windows, or something
> > fancy like that?
>
> Nope. It starts out partially under my dock, which I keep on the left.
> I can't remember if I ever moved it completely out from under the dock
> or not, but I'm pretty sure I did. (As a note, I looked around, and it
> appears that HIWindowGetAvailablePositioningBounds is the Carbon API
> to use to avoid overlapping the Dock; GLUT REALLY should use that
> automatically when you ask it for a maximized window.)
Hmmm, a partially obscured window. Sounds like a clue. I'll have to
run some tests with a side mounted dock on the G4. And I should probably
look back and see what I did on windows when the annoying popup tooltips
were driving me nuts.
Thanks,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> Hmmm, a partially obscured window. Sounds like a clue. I'll have to
> run some tests with a side mounted dock on the G4. And I should probably
> look back and see what I did on windows when the annoying popup tooltips
> were driving me nuts.
Well, I pulled the window out from under the dock, and that didn't help. On an
unrelated note, why will it only open models in the current directory? If I
give the full path to a model in a different directory, it fails to load it.
--Travis
|
|
|
In lugnet.cad.dev, Travis Cobbs wrote:
> In lugnet.cad.dev, Don Heyse wrote:
> > Hmmm, a partially obscured window. Sounds like a clue. I'll have to
> > run some tests with a side mounted dock on the G4. And I should probably
> > look back and see what I did on windows when the annoying popup tooltips
> > were driving me nuts.
>
> Well, I pulled the window out from under the dock, and that didn't help.
Yeah, but the hint helped me. With the side mounted dock I was able
to reproduce the problem (or a problem at least) on the G4. I cleaned up
some of the buffer swapping and window reshaping code, and it seems
to work better for me now. Of course I seem to be moving further and
further away from glut with every fix. Oh well. If you want, you could
try out this one and see if it's better on your system.
http://ldglite.sf.net/ldgliteosx1_2_3beta5.zip
> On an unrelated note, why will it only open models in the current
> directory? If I give the full path to a model in a different directory,
> it fails to load it.
I've started looking into that. It does the same thing on linux, I think.
I suspect I broke that a while ago when I added some code on Windows to
find the path to the executable in order to run lddesignpad plugins.
It's been a long time since I did much testing on anything but windows.
Have fun,
Don
|
|
|
In lugnet.cad.dev, Don Heyse wrote:
> Yeah, but the hint helped me. With the side mounted dock I was able
> to reproduce the problem (or a problem at least) on the G4. I cleaned up
> some of the buffer swapping and window reshaping code, and it seems
> to work better for me now. Of course I seem to be moving further and
> further away from glut with every fix. Oh well. If you want, you could
> try out this one and see if it's better on your system.
>
> http://ldglite.sf.net/ldgliteosx1_2_3beta5.zip
Yep, that fixed it.
--Travis
|
|
|