 | | Re: The Great Ball Contraption
|
|
(...) I didn't think about this until lunch, but you'll note this little yellow modules conforms to the spec, and works very well as an 90 degree turn to the left, and could also turn right: (URL) fact, it may be interesting to see someone build a (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) That's a good idea, which I don't think has been suggested, yet. However, that sort of requires a module to have corner studs... :) This module mostly uses liftarms: (URL) it turns out, I suspect 90% of the modules will not require (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Steve Hassenplug writes: > (URL) notice that the spec says "Currently, there is no standard for physically connecting modules together." One possibility is for a module to grab onto the two corner studs of the input bin of the module to the right, (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Why impose more limits than necessary? Of the 10 modules in our (very successful) test GBC, these 4 would have to be eliminated for being out-of-spec: (not a multiple of 32) (URL) I forgot, you can't use 48x48 baseplates. Add this: (URL) to (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Wow. Mondayness for me as well. I agree with you, Rob. That said, to start, Steve and Co. have their little thing goin' on, and I just wanted to point out that, within the parameters as layed out by them, one has toe potential to make a module (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
"David Koudys" <dkoudys@redeemer.on.ca> wrote in message news:IA3zL9.xKJ@lugnet.com... (...) What's the big deal? Either you can make a module to comply with simple specs, or you can't. If you need more space and can't fit everything inside 1 - (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) <snip> (...) I love standards, but I also like the 'variedness' of the GBC modules--trying to get somethign specific hammered down, like 'only 32x32 baseplates with the bin in the bottom left corner' might be a little difficult. As it is, (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | RE: The Great Ball Contraption
|
|
<SNIP> (...) Personally, I think something similar to the moonbase concept should be applied--an input bin with opening or edge at a given heighth and width and placed in a specifica location on a standard footprint size, or perhaps by allowing (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) I completely agree with that assessment. However, the premise is that I'm using a 32x32 baseplate with the hopper in the bottom left hand corner--using that premise, the module can be used either in-line, or 90 degrees. If one does not use the (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
news-gateway@lugnet.com wrote on 01/10/2005 10:01:48 AM: (...) thus the (...) module, (...) or 90 (...) That assumes that there is nothing in front of the hopper. There is nothing to say that you are limited to a module 32 studs deep. If you choose (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | RE: TGBC - The Weakest Link?
|
|
<SNIP> (...) Like a train layout, how about routing/switching module to create multiple ball routes? This way, if any one module acts up, only modules affected in that path need to be dealt with. Given the standards (regarding input/output bin (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Not to oversimplify, but I mean if the 'standard' for the ball contraption is 32 studs from the front of the hopper to the back edge of the baseplate, and thus I personally would probably grab a 32 x 32 stud baseplate to build on, thus the (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Is there something that a module builder can not do because the standard is too simple? Steve (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Steve Baker writes: > So simply write into the rules that everyone who submits a left hand > turn has to submit a corresponding right hand turn or they won't > be accepted. Excellent idea! But it's even easier than that!! Do NOT change the (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
tmassey@obscorp.com writes: > Or not: leave the standard as it is (except for specifying that the space > above the input belongs to the previous module), and have the organizers > build (or specificially request) out-of-spec modules to accomplish (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Brian Davis writes: > Instead of that, just make sure that your module delivers through > the "side" of the downstream module's territory. Then the spec should say that the ball should go through a vertical plane, and specify the size of the (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Why not universalize the standard so that a module that can turn must be configurable to turn either to the left or the right? A few ways this could be done are movable output stages, EG a sliding or drop-in output that can be placed where (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Actually, it's pretty interesting, if you consider how complex making a pair of turns really is. If you make a 90 degree right hand turn on a 32x32 baseplate, the module must output right next to it's own input. But, bins on a left-hand turn (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Who will promptly tell you to talk to Nik. They're his, not mine. However I CERTAINLY will be advising him to hold out for good space parts in trade. :) I might have to see if we can build one or two of these, seems like good fun. I might even (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) I think you can handle this with a little care in the design of the rules. If the table you are setting it up on is deep enough to permit it, you could always use four 90 degree pieces in a LEFT/RIGHT/RIGHT/LEFT sequence to keep the overall (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Yeah - I agree. You need the 'average builder' to stick to a simple straight-line standard one-size-fits-all module. If you don't then everyone will want to build something esoteric and you'll get hardly any simple modules of the kind that (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Instead of that, just make sure that your module delivers through the "side" of the downstream module's territory. In other words, using a chute (even a very short one) is a pretty easy solution. And that way the standard isn't further (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Or create other "Types" That's the long-term plan. Of course, any GBC that uses some of these other module types will require considerabily more planning prior to set-up, and it will also make the whole contraption less tolerant to the (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: TGBC - The Weakest Link?
|
|
(...) Not really. :) However, we're not expecting the GBC to run 100% of the time. It's not like letting a train run in a circle for eight hours. There are all kinds of things going on at the same time. In our testing, we seemed to run for about 20 (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: TGBC - The Weakest Link?
|
|
(...) First, test the modules as they are added to the system to make sure they meet the minimum requirement. Second, watch the whole thing like a hawk, being ready to shut it down to fix such problems. Third, there will have to be some (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) The list is on Steve's GBC page, below the Type I standard - just scroll down. (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
"Brian Davis" <brdavis@iusb.edu> wrote in message news:IA02Dv.1DH7@lugnet.com... (...) Hmm I must have missed that list post. I am kind of working on a contraption, but it's main aim is to sort LEGO bricks, which are a lot less likely to slide than (...) (22 years ago, 10-Jan-05, to lugnet.robotics)
|
| |
 | | Re: TGBC - The Weakest Link?
|
|
(...) Any operation involving a long sequence of events as in The Great Ball Contraption (TGBC) is likely to be fouled up by failure of one of the events in the chain - the so called weakest link. Is there allowance for the fact that one of the (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Russell Nelson <nelson@crynwr.com> wrote on 01/09/2005 04:20:10 PM: (...) Or not: leave the standard as it is (except for specifying that the space above the input belongs to the previous module), and have the organizers build (or specificially (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) I made a device that sends balls alternately down two chutes. Balls enter through a 2x2 hole in the top, onto the centre of a 7L studless beam, set up as a see-saw. Which ever way a ball goes, it drops onto another, longer, see-saw that tilts (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Steve Baker writes: > Another thought I had was that the organisers might want to consider > building a stage that has one input hopper and TWO outputs that sends > balls alternately to the two places. Yes! Since the soccer and basket balls are the (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Steve Hassenplug writes: > As you can see, it hangs over it's neighbor a bit. > > Of course, if you ass-u-me anything about the neighboring modules > you could run into problems. You can assume anything that's in the specification! Speaking of (...) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) That module is pretty simple and small. The whole thing is just 10 studs x 13 studs (with a power cord coming out) Here's a picture I just uploaded to brickshelf. More waiting for moderation. (URL) (22 years ago, 9-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Steve Hassenplug wrote: <snip> (...) Steve, What can you tell me about the Yellow "step feeder" type device in the "lower left corner" of the GBC ? A step feeder is a solution to a lego idea I wanted to build. How complex is it? Thanks Chris (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Actually, we've tried this. Our first get-together was an all-day event, where we did all sort of messing around. In addition to a ton of soccer balls, I've receintly picked up a few different basket ball sets, including a set that had two (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
In lugnet.robotics, Steve Baker <sjbaker1@airmail.net> wrote <snip> (...) That's a just a cool idea in general, to have a branching arrangement. Maybe some 'special' builders could produce modules that either divide or recombine streams? I am really (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Having different coloured balls would also be cool because it would allow machines to do things like sorting them so that one colour does one thing and another colour does something different. Mixing soccer and basket balls would let people do (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: Lego Pneumatics
|
|
(...) I would just buy a bunch of 8455 Backhoes: (URL) set gives you the best bang for your buck. Unfontunatly it's more than $70.00. -Orion (22 years ago, 8-Jan-05, to lugnet.market.buy-sell-trade, lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Best idea I have seen in a while. Will be quite a machine when done. You should try to paint or die a few balls a different color so spectators can follow a particular ball thruoghout the whole machine. Good luck guys. (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Lego Pneumatics
|
|
I am looking for large quantities of large pneumatic cylinders (up to 6); I have already tried Bricklink and Ebay and am rather wary of international shipping (due to costs and having to cange dollars into other currency). On Bricklink most stores (...) (22 years ago, 8-Jan-05, to lugnet.market.buy-sell-trade, lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) As I recall (I was not present, but talked with Steve about it) that module had problems with jamming - I think what you see in the video is a single ball partially jamming the mechanism and being kicked out hard. That particular module used (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
Do you have any better photos (particularly a top-down view) of that particular module? I don't quite understand how his module managed to fling the ball out instead of pushing or dropping it. I'd also like to see more photos of the individual (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Over time, as I gaze at my collection of parts, notably as my interests change, and curiosity is peaked, I realise that the floccinaucinihilipilification parts, such as soccer/basketballs, now are not only useful but in serious demand. I guess (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
"Steve Hassenplug" <steve@teamhassenplug.org> wrote in message news:I9yEEL.1s4z@lugnet.com... (...) time was very jerky and the sound was all messed up. If anyone else strikes this problem remember to hit play a second time, as I believe it should (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) In our test, when people dump, they usually dump onto a ramp in their own module, that drains onto the next module. Like on John's back hoe: (URL) you can see, it hangs over it's neighbor a bit. Of course, if you ass-u-me anything about the (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Well, at this point, it's not really a competition, so there aren't many "rules" beyond the "standard". So, you can use whatever you want. For example, the module at the bottom of this picture has a red & white distance sensor to detect when (...) (22 years ago, 8-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
news-gateway@lugnet.com wrote on 01/07/2005 04:11:02 PM: (...) one (...) the (...) This was my *exact* reason for asking: tipping containers. If the tip left to right (from their space to the next module's space), there is no need for extra width: (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Are non-LEGO items allowed? I'm just talking small parts of a mostly LEGO module, not a whole non-LEGO module. One obvious possibility I'm thinking about is string, but there may be others. ROSCO (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Just because you haven't done it, yet, doesn't mean you won't be able to do it in seven or eight months... Earlier today, someone said this, and it really sums up the possibilities with The Great Ball Contraption: "It can be really simple, or (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
This is outstanding! I have absolutely no expertise at this sort of thing, so I can't contribute anything but to stand on the sidelines cheering, but I look forward to seeing what sort of things people come up with. Bruce (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) In addition, there's an actual *reason* why that is set up that way. Can you picture trying to set up a large scale GBC if we need a certain number of "turns" and "straights"? There could also be interference issues if the rear of the GBC line (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Man, this project is so cool!!!!!!! (...) I am so looking forward to it. (...) No questions...... but one comment..... Chris may be King of rtl, and Dave is King of the Sheets! Move over guys, because Steve has got balls, and that makes him (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
"Brass Tilde" <brasstilde@insightbb.com> wrote on 01/07/2005 01:52:19 PM: (...) edge, (...) participate. (...) a (...) correct (...) and (...) While what you're saying will work fine, the standard does say: Each module should have an "in" basket, (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | RE: The Great Ball Contraption
|
|
(...) Soccer balls, like Ruffles, have ridges... (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) The standard doesn't explain this very well, because I'm really not sure how to write it. A module can be any size, but the input and output should be on opposite sides, with the front of the input being no more than 32 studs from the back of (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | RE: The Great Ball Contraption
|
|
(...) I happen to have a LEGO basketball set on my desk... Eyeing it up against a ruler, it is 14mm in diameter. Depending on design choice, one might consider using only LEGO basketballs or soccer balls because other materials would have different (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) This post will be overkill I am sure but this Bricklink store sells has 42 soccer balls $.10 US a piece (URL) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) I'll point out that the standard as it's defined pictorially allows for a non-linear layout just as it stands. As long as the input in in the correct place relative to the previous block's output, and the output is placed correctly relative to (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) I'd really recommend against using anything but LEGO balls. If you just want to play around and test, one good place to get a couple balls are the LEGO NBA sets. I've seen them on sale all over. Using any other type of balls will not give you (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Well, it's LEGO - it's just a tad smaller than 2 studs in diameter. If you've got a marble or wooden ball that will roll between two walls two studs apart (clearance about 1.5 mm on each side) you've got the size. The only real problem is (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Yep. The IN basket is really more of a "target zone" - the upstream module should drop the balls into your IN basket zone (really, the 8x8 center section) from a height of at least 10 bricks (no specified upper limit, so when building your (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Really, the only thing defining a "module space" is a flat L & R edge, and no part of the module extending more than 32 studs from the front edge of the input bin "zone" - the footprint need not be remotely rectangular, nor is there a set (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Sure enough, that'll happen. What about the sawdust envy that LEGO soccer balls will inevitably suffer from? Ed (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Or someone who owns a soccer ball could measure it and publish the size. Most craft stores sell a selection of little wooden balls. It might be cheaper to buy a few about the right size rather than paying to mail genuine Lego ones? Of course, (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Cool - That works for me :) Steve - on the page it says "The IN basket should be 10 studs by 10 studs (outside dimension) with an 8x8 opening, and should be 10 bricks (beams) tall." and "Each module should be able to accept balls at an average (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) I read that, I just decided to be a little more apparent, as in 'Gee Steve, send me some balls!' ;) I have a grande total of, wait for it... 1 soccer ball, and it came with my Brickfest '04 set. At your convenience, of course :) Dave K (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) To clarify--are we allowed to use 2 'module spaces' if we want? As well, I notice that the train ran along 'outside' the designated module area--is that allowed as well? Do we then have to get permission from our neighbouring module owners to (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Hidden somewhere on the page above, it says I can suppily you with soccer balls. Thanks to Christina, I have exactly enough to suppily EVERYONE with soccer balls. If I run short, I'll just talk with Larry... :) And, for the record, the you are (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) This is fantastic. The movie is well worth the download, because if the words don't encourage, the pictures certainly will. If enough people sign up, we'll need a seperate GBC room :) JB (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: The Great Ball Contraption
|
|
(...) Oh My Goodness!!! I'm so there for this!!! This looks like the funnest thing to happen to RCX's since rtl events. Where does one purchase 20-30 soccer balls? Dave K (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | The Great Ball Contraption
|
|
In an attempt to provide Technic & Mindstorms builders the same cooperative building opportunity that's available to Moonbase, Castle, and Town/Train builders at Brickfest, we present to you: The Great Ball Contraption. When it's assembled at (...) (22 years ago, 7-Jan-05, to lugnet.robotics, lugnet.technic, lugnet.trains, lugnet.events.brickfest, lugnet.events, lugnet.announce) !!
|
| |
 | | Re: RCX Sensor Port
|
|
(...) Experiments completely second that, see this V/I curve I measured while preparing my (URL) GP2D12 interface>. Philo (URL) (22 years ago, 7-Jan-05, to lugnet.robotics, FTX)
|
| |
 | | RCX Sensor Port
|
|
I've been looking into the interface of the RCX sensor port, as well as studying available information. This page from Stef Mientki suggests that the port uses a current source: (URL) believe this to be correct. According to the circuit topology and (...) (22 years ago, 7-Jan-05, to lugnet.robotics)
|
| |
 | | Re: Uses for tacho wheel?
|
|
(...) Whilst white tacho wheels were used by the barcode truck for speed sensing (on the truck for variable engine rev sounds), the Star Wars UCS X-Wing used grey ones on the cannons(?) on the wings. Tacho wheels have 8 slots that will hold flex (...) (22 years ago, 6-Jan-05, to lugnet.robotics)
|
| |
 | | Re: Uses for tacho wheel?
|
|
(...) They were used to interupt the light beam/sensor on the Code Pilot allowing the Code Pilot to sense shaft rotation. -Rob. (22 years ago, 5-Jan-05, to lugnet.robotics)
|
| |
 | | RE: Uses for tacho wheel?
|
|
If you point a light sensor at them, you can use them as a rotation sensor. They are also available in one of the NBA basketball sets. If memory serves, they used it as a gear that was part of a ratchet mechanism to keep the wind-up motor from (...) (22 years ago, 5-Jan-05, to lugnet.robotics)
|
| |
 | | Uses for tacho wheel?
|
|
Attempt #2 at this post... I recently aquired (via the "grab bags" at LEGO stores - wonderful idea, second only to PaB for me) two of the "tacho wheels": (URL) played with them only a little, but how do you *use* these things? I'd download the (...) (22 years ago, 5-Jan-05, to lugnet.robotics)
|
| |
 | | Re: RCX IR Transceiver and Sensor Port Circuits
|
|
(...) Here's the (hopefully) finished circuit diagram for the IR Transceiver, complete with semiconductor component types and bold lines. I changed the supply rail voltage to concide with the zener diode voltage. There's also a space on the board (...) (22 years ago, 4-Jan-05, to lugnet.robotics, FTX)
|
| |
 | | out
|
|
Please put me out of the adress list. I don't want to receave any post any more. Tanks (22 years ago, 3-Jan-05, to lugnet.robotics)
|
| |
 | | Re: 2-wheelers
|
|
I've been looking at that little piece of code, and trying to duplicate its effect in my YAL-based program, without much luck. When I had Steve's code running, it did tend to stay in one spot, but it eventually became unstable. At this point I plan (...) (22 years ago, 2-Jan-05, to lugnet.robotics)
|
| |
 | | Re: RCX IR Transceiver and Sensor Port Circuits
|
|
hi Mark, i have learned a lot from your RCX IR Transceiver Circuit. Things i did not know before. But please dont forget to show us that Sensor Board Circuit. As far as i know, a real introduction into designing RCX selfmade Sensors is not available (...) (22 years ago, 1-Jan-05, to lugnet.robotics)
|
| |
 | | New invention instructions
|
|
Where can I get new inventions and their building instructions besides those given in Lego Mindstorms Robotics Invention System 2.0? (22 years ago, 1-Jan-05, to lugnet.robotics)
|
| |
 | | Re: 2-wheelers
|
|
(...) I think another huge difference (for me at least) is that Steve's code learns where the upright position is, while most of the others need to be put down in the correct position. (That is what the piece of code does in the 50ms if()). John (22 years ago, 1-Jan-05, to lugnet.robotics)
|
| |
 | | 2-wheelers
|
|
I don't know if anyone cares about this, but -- I think I figured out something about Legway-type bots and the software that drives them. The puzzle is: why do some versions need a full PID controller (Proportional-Derivative Integral feedback), (...) (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Transistors used in Lego Electronic products
|
|
Can anyone tell me what type of transistor is in a surface mount package marked "E16"? They're used in the Cybermaster radio tower. Are the transistors NPN or PNP? Do they have the usual pin-out (collector on its own, base and emitter on the other (...) (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Re: controlling RC-servos
|
|
(...) Again, I forgot the link : (URL) (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | controlling RC-servos
|
|
Ultimate ROBOLAB v. 1.4.5.7 now has the feature to control 1 to 3 RC-servo motors with full access to the normal Ultimate RCX-functionality. This version will be available soon for beta-testing. Cheers, Claude (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Re: RCX IR Transceiver and Sensor Port Circuits
|
|
(...) Thanks Mark, it's on my page, but as I said it's mess, so it's on a slightly different page: (URL) hope to rearrange my Lego Website in one of the next months, but first I've to write a decent html editor ;-) cheers, Stef (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
I recently implemented a new motor control "source" specifically targeted at PID algorithms in the new firmware. It takes a signed number in the range -128 to +128 and converts it into a motor control command. -128 to -1 is reverse direction and (...) (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
(...) that would be interesting, but I meant the wheels. (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
this looks similar to the logic I got working. I tweaked the parameters (equiv. to a,b,c in your code) and it's much more stable now. Interestingly, I have to set 'b' very high, about 2X of what 'a' is set to -- most code I've seen is just the (...) (22 years ago, 31-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
thanks much for the links! Using a mod of Frederic Siva's code, I've managed to get my bot somewhat stable. It wobbles around like a drunken sailor but basically stays up. I've got a movie file of it careening around the floor for about a minute (...) (22 years ago, 30-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
(...) ...and here is a NQC sample code that works on YAL, using Dick Swan's fast firmware. Try it on a clear color surface (not necessarily even, some patterns help stabilize position) with overhead diffuse lighting. YAL must be started balanced (...) (22 years ago, 30-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
(...) There was one design out there that works with standard Lego - but it has (IIRC) two light sensors out on long booms in front and behind the robot. At those distances from the pivot point, they move a much larger distance than if they are (...) (22 years ago, 30-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
(...) You may have a look to YAL: (URL) (22 years ago, 30-Dec-04, to lugnet.robotics)
|
| |
 | | Re: balancing bot
|
|
Hi Dan, (...) I have also been playing with it the last week or so and got it to work. At the end I used Steve's legway.c program with everything except the balancing removed and used the raw sensor values, tweaked a bit. That together with two (...) (22 years ago, 30-Dec-04, to lugnet.robotics)
|
| |
 | | balancing bot
|
|
hi all-- lately I've been playing with legway-inspired ideas. After much frustration, I'm finally getting some results using a standard lego light sensor with some custom enhancements (not taking it apart, just adding a lens and a light source). At (...) (22 years ago, 30-Dec-04, to lugnet.robotics)
|
| |
 | | Re: RCX IR Transceiver and Sensor Port Circuits
|
|
(...) Stef, Please feel free to include my schematic in your page. Perhaps it fills a couple of gaps left by those already there. Mark (22 years ago, 28-Dec-04, to lugnet.robotics)
|
| |
 | | Re: Servo Motor Control
|
|
(...) Dick, I am very eager to see this! For a long time, I've been trying to do exactly this with limited success. Can you elaborate a bit on what you did code-wise to achieve this? Iain (22 years ago, 29-Dec-04, to lugnet.robotics)
|
| |
 | | Re: Errors while installing brickOS 0.2.6.10
|
|
(...) These two installers offer the brickOS beginner an extremely easy way to get Cygwin and the necessary cross compilers installed on a Win32 system as well as all the brickOS files (and LeJOS files also). If you download and run these two (...) (22 years ago, 28-Dec-04, to lugnet.robotics, lugnet.robotics.rcx, lugnet.robotics.rcx.legos)
|