|
|
| |
In lugnet.storage, Bryan Wong wrote:
| |
In lugnet.storage, Scott Lyttle wrote:
| |
Since this product is made from pine, I’d dare say there is no particle board
present. (Most of those bookshelves from Wal-Mart are made of particle
board...Particle board is an awful material to build with--even MDF would be
preferred over particle board.. and MDF is basically sawdust and glue!)
So, you’re probably getting a pretty decent quality product with those
containers. I, for one, will not be buying them, simply because I’ve got a
really nice table saw in my garage to use for another of my hobbies. I’m
currently in the process of using my saw to make storage shelves in my own
LEGO room, and it’s building my skillset on the saw at the same time.
Yes, some will probably be sold by those who “must have it at any price”, but
if the quality of that furniture will be anything like the 3-sided play
table, it should hold up very well. For some reason, I think the furniture
is not shipped assembled, so assembly is required.
|
Yeah, the website says that the LEGO furniture is made from pine and MDF.
Also says that the item will come mostly unassembled - much easier to ship
that way I guess. Besides, being a construction toy company, I’d expect most
LEGO products to require assembly!
-Bryan
|
**snickers**
Bryan, you beat me to the funniest part of this whole thread. “Some assembly
required...!” Yeah, right.
Still wouldn’t buy it at those prices for kids. I’d get it for myself, and have
fun with it...if I had the bucks. But between getting new LEGO, and buying
bricks off of Bricklink--does that sound familiar?
Play Well and Prosper,
Matthew
“The Brick Detetctive”
|
|
| |
In lugnet.storage, Scott Lyttle wrote:
> Since this product is made from pine, I'd dare say there is no particle board
> present. (Most of those bookshelves from Wal-Mart are made of particle
> board...Particle board is an awful material to build with--even MDF would be
> preferred over particle board.. and MDF is basically sawdust and glue!)
>
> So, you're probably getting a pretty decent quality product with those
> containers. I, for one, will not be buying them, simply because I've got a
> really nice table saw in my garage to use for another of my hobbies. I'm
> currently in the process of using my saw to make storage shelves in my own LEGO
> room, and it's building my skillset on the saw at the same time.
>
> Yes, some will probably be sold by those who "must have it at any price", but if
> the quality of that furniture will be anything like the 3-sided play table, it
> should hold up very well. For some reason, I think the furniture is not shipped
> assembled, so assembly is required.
Yeah, the website says that the LEGO furniture is made from pine and MDF. Also
says that the item will come mostly unassembled - much easier to ship that way I
guess. Besides, being a construction toy company, I'd expect most LEGO products
to require assembly!
-Bryan
|
|
| |
In lugnet.storage, John Patterson wrote:
| |
My guess is that they were made in China and cost Lego about a dollar each.
Tack on another dollar for shipping to the distrabution center.
|
This guess seems out of whack. Lego has pretty thin price margins comparatively
(just ask merchandisers what the ‘at cost’ price is for Lego to get an idea). I
don’t see why Lego would be jacking up the price for these storage bins but NOT
for everything else. Besides, whenever they try to market things in the USA, the
price margins are razor thin compared to everywhere else-- why should we expect
these to be any different?
But even moreso-- what do you think most US citizens would be willing to pay for
them? If they were for sale at $40 per shelf, they’d be selling like iPods to
teenagers. They’d move thousands of them REALLY quickly, because they LOOK
fantastic, they’re versatile, and they’d be affordable. If Lego’s cost were even
$20 per, they’d be making a KILLING at $40 per unit, selling them by the
proverbial barrelful. But at $100+, they’ll sell FAR fewer, and make way less
money (assuming the same $20 baseline cost for Lego).
Personally, I think these look like (and are priced like) high quality shelves,
and I’d be proud to have some. I don’t think I’d keep my Lego in them (because
it’s just inefficient for AFOL sized collections), but they look perfect to go
in (say) the front hall as a place to store shoes or boots, or in some other
room as a cute storage system. I also think they’d work well for schools, day
care centers, etc-- anywhere where there’s a chunk of Lego for kids to play with
that needs a sturdy storage system.
DaveE
|
|
| |
In lugnet.storage, Brian Kendig wrote:
> Anyone see the new "LEGO Furniture" items being sold now in the online catalog?
>
> A storage box in red, yellow, blue, or green, slightly larger than two feet deep
> by 1.5 feet wide by one foot high... for a hundred twenty dollars!!
>
> And a stacking bin in green or red, one foot tall by one foot deep by three feet
> high - for a HUNDRED FIFTY dollars!!
>
> I could understand these at a tenth of the price; I might buy storage boxes for
> $12 each and stacking bins for $15 each - but am I the only one who thinks that
> the LEGO prices for these are *insane*?!
>
> And, there's a table that's 2' by 4' by a foot and a half high - for two hundred
> dollars!! I could make something like that out of less than ten dollars of
> wood... it doesn't even have baseplates on its surface!
Well, from what I understand, the materials are made of pine (softwood...As an
amateur woodworker, I like hardwoods much better), and I agree, the prices are a
bit high, but there's still probably a bit of cost there. Wood is not cheap,
even in bulk, factor in shipping, warehousing and labor (if made in China, labor
is probably quite small, relatively speaking). I'd say for that 150 dollar
price tag, you're probably looking around 40-50 dollars material and shipping
cost--remember, oil is going up, and China is now a major consumer of oil, given
their current economic boom.
Since this product is made from pine, I'd dare say there is no particle board
present. (Most of those bookshelves from Wal-Mart are made of particle
board...Particle board is an awful material to build with--even MDF would be
preferred over particle board.. and MDF is basically sawdust and glue!)
So, you're probably getting a pretty decent quality product with those
containers. I, for one, will not be buying them, simply because I've got a
really nice table saw in my garage to use for another of my hobbies. I'm
currently in the process of using my saw to make storage shelves in my own LEGO
room, and it's building my skillset on the saw at the same time.
Yes, some will probably be sold by those who "must have it at any price", but if
the quality of that furniture will be anything like the 3-sided play table, it
should hold up very well. For some reason, I think the furniture is not shipped
assembled, so assembly is required.
Scott
|
|
| |
In lugnet.storage, John Patterson wrote:
| |
They are in the new catalog. My guess is that they were made in China and
cost Lego about a dollar each. Tack on another dollar for shipping to the
distrabution center.
|
Yeah, not buying that guesstimate, on either count. Wood in large volume is a
lot more expensive than a small amount of plastic, and for shipping purposes,
those will either eat up a huge amount of volume (if they’re preassembled), or
weigh an ungodly amount (if they’re flat-boxed kits) and still take up a large
volume. Either way, they will not ship anywhere near as economically as small
boxes of plastic toys. Also, consider warehousing costs, which will again be
much higher based on volume (and order-picking might be similarly affected by
both weight and volume).
| |
Give it time, they probably bought thousands and when they get stuck with
them, as with Galidor, the price will drop very very low.
|
I’m sure they don’t expect this to sell like hotcakes, so they probably ordered
in fairly low volume. There will be enough moderately wealthy families out
there who’ll think this is worth buying for them to move their stock. When I
was in high school, I spent a few years working for a boat-builder, and he used
to make rocking-boats that a local store would sell for ~$150. This was over 15
years ago, we lived in a resort town of ~6000 residents, and those rocking-boats
would still sell as fast as he could make them.
|
|
| |
In lugnet.storage, Matthew Crandall wrote:
| |
And made from wood (or a wood-like substance), which is not a LEGO usual
feature.
|
What’s so unusual about it? The Billund LEGOLAND park still reportedly sells
the same wooden letter blocks that have been made by The LEGO Company since
before they got into plastics.
| |
I wouldn’t buy them for my kids (if I had them), but I might
consider them if I were single and LEGO was my job (Think like that artist
chap that has a need for a studio’s worth of storage). I might also consider
them if I were filthy rich and wanted my kids to have a LEGO room. Otherwise,
I agree--they are a tad steep for my taste.
|
I might eventually buy the table and stool, just for the novelty of it all, but
as cool as the stacking bins are...they’re too expensive to do large-scale
storage with, and too cool to just get one or two, unless you’ve got cash
bleeding out of your pockets in need of something to be spent on.
|
|
| |
In lugnet.storage, Brian Kendig wrote:
> Anyone see the new "LEGO Furniture" items being sold now in the online
> catalog?
Yup. Mostly they all look pretty cool (particularly the ones that actually have
studs on top for stacking purposes), but at those prices I will have to pass.
> I could understand these at a tenth of the price; I might buy storage boxes
> for $12 each and stacking bins for $15 each - but am I the only one who
> thinks that the LEGO prices for these are *insane*?!
They aren't. Not really. Have you priced furniture recently? I've been
looking for fairly basic computer desks, and I've been seeing prices as high as
$300 to get what I'm looking for. And these are made from cheap, pressed
particle-board. The LEGO furniture appears to be made from milled lumber, or at
least high-grade plywood. _Those_ desks ran upwards of $900, and that was
without some of the key features I'm looking for. These are not priced to be a
high-volume sales item, but
> And, there's a table that's 2' by 4' by a foot and a half high - for two
> hundred dollars!! I could make something like that out of less than ten
> dollars of wood... it doesn't even have baseplates on its surface!
Yeah, I'm guessing you haven't priced wood lately either. Or you'd be making it
entirely out of 3/8" CDX plywood. But I do have to agree about the absense of
and incompatibility with baseplates. It'd make more sense if there was a
shallow hint of a pit sized 30"x60", so that the top surface of baseplates (not
counting the studs, of course) would sit flush with the rim of the table, and it
would accomodate 3x6 32-stud baseplates, or 2x4 48-stud baseplates. That way
the baseplates would stay locked in place, would be interchangable, and you
could continue building out over the rim without it tilting your MOC one way or
the other.
|
|
| |
I just looked at the sorting and storage box I bought, with the shelves and sure
enough it was made in China. John P
|
|
| |
In lugnet.storage, Matthew Crandall wrote:
| |
In lugnet.storage, Brian Kendig wrote:
| |
Anyone see the new “LEGO Furniture” items being sold now in the online
catalog?
A storage box in red, yellow, blue, or green, slightly larger than two feet
deep by 1.5 feet wide by one foot high... for a hundred twenty dollars!!
And a stacking bin in green or red, one foot tall by one foot deep by three
feet high - for a HUNDRED FIFTY dollars!!
I could understand these at a tenth of the price; I might buy storage boxes
for $12 each and stacking bins for $15 each - but am I the only one who
thinks that the LEGO prices for these are *insane*?!
And, there’s a table that’s 2’ by 4’ by a foot and a half high - for two
hundred dollars!! I could make something like that out of less than ten
dollars of wood... it doesn’t even have baseplates on its surface!
|
Brian--
Yeah, I’ve seen them. They’re nice. Nifty.
And made from wood (or a wood-like substance), which is not a LEGO usual
feature. I wouldn’t buy them for my kids (if I had them), but I might
consider them if I were single and LEGO was my job (Think like that artist
chap that has a need for a studio’s worth of storage). I might also consider
them if I were filthy rich and wanted my kids to have a LEGO room. Otherwise,
I agree--they are a tad steep for my taste.
Nobody said you had to buy them, though...While I appreciate the idea, I’d
rather buy LEGO proper and create a different way to store it all. If you’re
really good with wood and the tools to shape it--build your own storage. Me,
I’m not so good with that kind of thing. That’s why big box stores (like the
one that starts with “W” and ends in “Mart”) like people like me. We buy very
big plastic tubs, and use those to store LEGO. No bugs, they stack well, and
I can keep the original boxes and bags. (Ziploc bags are a help here as
well.)They’re not perfect--but it’s a whole wad cheaper than the LEGO storage
boxes.
Play Well and Prosper,
Matthew
“The Brick Detective”
|
They are in the new catalog. My guess is that they were made in China and cost
Lego about a dollar each. Tack on another dollar for shipping to the
distrabution center. Give it time, they probably bought thousands and when they
get stuck with them, as with Galidor, the price will drop very very low. John P
|
|
| |
In lugnet.storage, Brian Kendig wrote:
| |
Anyone see the new “LEGO Furniture” items being sold now in the online
catalog?
A storage box in red, yellow, blue, or green, slightly larger than two feet
deep by 1.5 feet wide by one foot high... for a hundred twenty dollars!!
And a stacking bin in green or red, one foot tall by one foot deep by three
feet high - for a HUNDRED FIFTY dollars!!
I could understand these at a tenth of the price; I might buy storage boxes
for $12 each and stacking bins for $15 each - but am I the only one who thinks
that the LEGO prices for these are *insane*?!
And, there’s a table that’s 2’ by 4’ by a foot and a half high - for two
hundred dollars!! I could make something like that out of less than ten
dollars of wood... it doesn’t even have baseplates on its surface!
|
Brian--
Yeah, I’ve seen them. They’re nice. Nifty.
And made from wood (or a wood-like substance), which is not a LEGO usual
feature. I wouldn’t buy them for my kids (if I had them), but I might consider
them if I were single and LEGO was my job (Think like that artist chap that has
a need for a studio’s worth of storage). I might also consider them if I were
filthy rich and wanted my kids to have a LEGO room. Otherwise, I agree--they
are a tad steep for my taste.
Nobody said you had to buy them, though...While I appreciate the idea, I’d
rather buy LEGO proper and create a different way to store it all. If you’re
really good with wood and the tools to shape it--build your own storage. Me, I’m
not so good with that kind of thing. That’s why big box stores (like the one
that starts with “W” and ends in “Mart”) like people like me. We buy very big
plastic tubs, and use those to store LEGO. No bugs, they stack well, and I can
keep the original boxes and bags. (Ziploc bags are a help here as well.)They’re
not perfect--but it’s a whole wad cheaper than the LEGO storage boxes.
Play Well and Prosper,
Matthew
“The Brick Detective”
|
|
| |
Anyone see the new "LEGO Furniture" items being sold now in the online catalog?
A storage box in red, yellow, blue, or green, slightly larger than two feet deep
by 1.5 feet wide by one foot high... for a hundred twenty dollars!!
And a stacking bin in green or red, one foot tall by one foot deep by three feet
high - for a HUNDRED FIFTY dollars!!
I could understand these at a tenth of the price; I might buy storage boxes for
$12 each and stacking bins for $15 each - but am I the only one who thinks that
the LEGO prices for these are *insane*?!
And, there's a table that's 2' by 4' by a foot and a half high - for two hundred
dollars!! I could make something like that out of less than ten dollars of
wood... it doesn't even have baseplates on its surface!
|
|
| |
In lugnet.org.ca.rtltoronto, David Koudys wrote:
| |
In lugnet.org.ca.rtltoronto, David Koudys wrote:
snip
See, what we have here is a failure to communicate--this was supppose to be
the pic of bins ‘n boxes under the table. Eh...
|
Wow, looks like you have been very busy indeed. I use those same storage bins
of my collection as well, although I dont think I will ever get around to
sorting it all, so much for that New Years resolution (even tho I still have
half a year... Im not holding my breath.)
Hmmm, I did manage to see the pics yesterday, but looks like you are having a
server issue today Dave... hopefully its a quick fix.
Janey “Red Brick”
|
|
| |
In lugnet.org.ca.rtltoronto, David Koudys wrote:
snip
See, what we have here is a failure to communicate--this was supppose to be the
pic of bins ‘n boxes under the table. Eh...
|
|
| |
By this guy--
http://news.lugnet.com/storage/?n=1599
(thanks James!)
And by the fact that Canadian Tire had a sale last week of those drawers, we
redid the LEGO room--
Still in the throes of cleaning things up and organizing--have to sort the stuff
in these bins/boxes--
(as well as other bins ‘n boxes distributed thru the basement)
And I wanna build shelves above these drawers to hold the miscellaneous stuff,
but I think it’s coming together very nicely!
Once again, thanks to James for the perfect idea for our LEGO storage issue.
Dave K
|
|
| |
In lugnet.storage, James Trobaugh wrote:
| |
After moving into my new house almost a year ago I finally got my LEGO room
in order...
|
James-
Nice job. It looks like a fun and comfortable place to “work”. We haven’t had
our LEGO space that orderly for 10 years.
But: You do have room for more LEGO in the room! Check out all that unused space
between the ceiling joists.
-Ted
|
|
| |
In lugnet.storage, James Trobaugh wrote:
| |
After moving into my new house almost a year ago I finally got my LEGO room
in order. Its a 10x20 room in my basement, and yes I have to share it with a
HVAC unit & water heater but I take the space where I can find it.
It does give me plenty of room for storage and building space. Of course I’ve
already filled it up with no room for more LEGO, but I’m sure I can find the
room if needed.
   
|
That’s a really fine looking Lego room. I’m most definitely jealous of it.
Tim
|
|
| |
After moving into my new house almost a year ago I finally got my LEGO room in
order. Its a 10x20 room in my basement, and yes I have to share it with a HVAC
unit & water heater but I take the space where I can find it.
It does give me plenty of room for storage and building space. Of course I’ve
already filled it up with no room for more LEGO, but I’m sure I can find the
room if needed.
|
|
| |
wow do i feel like jar jar binks at the moment. i fell asleap last night with my
brick/plate modified plano bin on my bed. this wasn't intentional as i kinda
passed out but when i woke up i found it on the floor, DOH! luckly? it didin't
end up upside down but there's a good amount on the floor and more in slots
where they don't belong. oh well i guess it's a learning experince.
anyone else have something like this happen recently?
ondrew<-- sorting yet again =)
|
|
| |
Jon Rasmussen, who has been in PNLTC and its offspring clubs for about 10 years
now and who is a very active builder in Wild West, among other themes, is still
a lurker here on Lugnet. So I'm posting this stuff for him. :)
Jon will be hosting the Speed Build!
Saturday, March 31, 3:00 p.m.(Time subject to change without notice)
Come and compete with some of the slickest speed builders on the planet. We
will be building one of the current small Racers sets. The exact set will be
announced Frida, March 30th, during the Opening Ceremonies. You may then
purchase th set at the Lego store which will be open exclusively to BrickFest
attendees from 10:00 pm to 1:00 am that night. If you think you are up to the
challenge, come and see how fast the bricks will fly!
Jon will also be hosting this Panel Discussion:
Topic: Well-Running Steam Engines
Come and interact with some of the greatest Lego steam train builders in the
world. This will be an exciting give-and-take session with some of the keenest
minds when it comes to building a well-running steam engine. So if you are a
trainhead at all, this will be a session NOT to miss!
And Jon will be hosting a Round Table Discussion
Topic: Strategies on Sorting
This will be an opportunity to brainstorm with other Lego enthusiasts on
different methods and philosophies of sorting bricks. Come and be ready to
share the ideas that have worked for you! (This is always a really fun and
exciting discussion!) YOU WON'T WANT TO MISS THIS ONE!!!
Editor's (Matt's) note on the Round Table Discussion: This discussion happens
every year at NWBrickCon and Rick Clark always tries to hijack it to his sorting
method which I can't even remember (something about zip lock bags). Anyway, all
true and excellent sorting practices, as everyone should know by now, start with
Matt's Mushroom Bins (http://www.auctionbrick.com/mchiles/shroombins/) so come
and help keep this discussion on track!
And don't forget to check out Matt's Shroom Bins while you are at BrickFest - we
have a brand new Jumbo size that will be introduced there!
-Matt :)
(for Jon)
www.brickfest.com - only 2 weeks away!
|
|
| |
For those of you who live in a state with a Menard's store, they have the
following sales through October 15:
18 drawer cabinet - $9 (regular $11)
4"X8" pocket stowaway, 6 compartment - $1 (regular $2)
I know that a lot of people use the 18 drawer cabinets, and you can't find new
ones any cheaper than $9.
David
|
|
|
