To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.roboticsOpen lugnet.robotics in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Robotics / 24339 (-20)
  Re: Barcodes & error detection
 
(...) I'll have to take some small photos and post them to my Brickshelf account, and I should really include seom response curves from the various lightsensors so you can "see" what the sensor is seeing during a barcode read. (...) Hmmm. I'm not (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Oh. I'd not thought of that at all. At those angles, the shroud design and the size of the "window" the light sensor can see through get to be tougher problems. (...) It may be because a good retroreflector won't work in this situation - the (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Gus uses two ight sensors, one to follow the (left edge) of a black line on a white background, and a seperate light sensor on an "outrigger" to read the barcodes. There is no light brick, but instead both use the light sensor itself to supply (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: self-propagating RCX program
 
(...) That is very cool, but a little scary. The dawn of an RCX virus. If you could then write it so it was also compatible with the other P-Bricks (like the spybotix) that would furtahr enhance it. Very, very nice. Question - if a "victim" RCX is (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) I had in mind a steeper angle - let's say 20-30°. Light sensor optics is very primitive!!! (...) Serious objection... From my laser sensor experience, I tend to think that retroreflective tape would work well, but maybe not enough to separate (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
"Brian Davis" <brdavis@iusb.edu> wrote in message news:IMI0IC.z2M@lugnet.com... (...) I'm just curious, but how much development did you do making the area where the light sensors themselves are mounted as black and light-proofed as possible to (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Are you lighting the area with a light brick, or relying on ambient illumination? I find the Lego light sensor extremely finicky in "real work" situation, and try to always shield the area from ambient and provide my own illumination. -Rob A> (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Absolutely, but in any real world application there is almost always some error rate. (...) John Barnes also suggested that to me after I posted, and I'm embarassed to admit that the thought hadn't occured to me. I need to test (again), but (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Mars mission III
 
Luxembourg Science Festival Event is planned from Oct 22th to 30th. And our Mars Rover 3d edition will be a part of it. This time people out there will be able to move the robot over the Mars-environment as already known. BUT, the rover is equipped (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  self-propagating RCX program
 
Hi guys, Anyone interested in an experiment of a self-reproducing RCX program? Then have a look at : (URL) Enjoy ! (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
Hello Brian, Error correction is good, but no error is probably better... (...) This may be caused by specular reflexion on a too shiny black stripe. We had that problem during the Billund AFOL mindstorms competition, it was solved by tilting the (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Mana Cat
 
(...) I didn't think you could come into such problems while building. With your skills I thought every building related problem could be solved. Seems with the skills even the problems grow... What I saw up to now was nice to look at. It made me (...) (21 years ago, 8-Sep-05, to lugnet.technic, lugnet.robotics, lugnet.build.mecha)
 
  Re: Barcodes & error detection
 
(...) I actually started out this way, before getting lost in the number of combinations. After you suggested it, I may actually reconsider, because: (...) Perhaps less; right now the reflective strips don't really encode information, they just (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Agreed, and, for this application, the bit overhead to allow on-board correction is probably just not worth it. After all, if an error is detected, the forklift can always back up and try to read the barcode again. (...) Almost exclusively (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
Thanks, you actually made me pull out one of my old comp sci texts :-) I remembered studying this stuff many moons ago .... Error detecting requires a "distance" between codes of at least TWO ... what this means is to detect a single bit error each (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Well, there is a sharp distinction between error DETECTION and error CORRECTION. It's also important to characterize the errors you are getting. Are you getting single bit errors or multi-bit errors? You will certainly need to use more bits in (...) (21 years ago, 8-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) Right off hand I don't know any checking mechanism that works best with false readings of one polarity. Do you know anything about Error Correction Codes? ECC is used to detect and correct single bit errors, it can also detect double bit (...) (21 years ago, 7-Sep-05, to lugnet.robotics)
 
  Re: New Diagrams of Basic Pneumatics Parts and Circuits
 
(...) James, What all have you tried. One of the best compressors using a Mindstorms mini-motor is the Ralph Hempel design, as shown by Dr. C. S. Soh's page: (URL) If you want to go all out, a very simple, and powerful compressor is: (URL) The issue (...) (21 years ago, 7-Sep-05, to lugnet.robotics)
 
  Re: Barcodes & error detection
 
(...) One suggestion that may improve your reliability is to use colour transitions rather than just colours. This would mean, however, that you would need more strips. For example, if you currently represent B=0 and W=1 your barcode for 0110 would (...) (21 years ago, 7-Sep-05, to lugnet.robotics)
 
  RE: New Diagrams of Basic Pneumatics Parts and Circuits
 
The drawings are FABULOUS! Great work. I have a question: I am looking to build a lego compressor that would be strong enough to move a quad or sextuple bot with the RCX. We have tried a few with no luck - never produces sufficient air or pressure. (...) (21 years ago, 7-Sep-05, to lugnet.robotics)

Next Page:  5 more | 10 more | 20 more
Redisplay Messages:  All | Compact

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR