Subject:
|
Re: Lightweight show tables
|
Newsgroups:
|
lugnet.trains
|
Date:
|
Sat, 27 Jan 2001 14:20:46 GMT
|
Viewed:
|
763 times
|
| |
|
|
Currently our tables are made with 5/8 particle board tops and are about
3'x6'. We recently did a show for the Atlanta History Center and had to
carry these beast up two flights of stairs to the room where we were
displaying. I tell you after that show I really starting thinking about ways
to lighten the load. My original tables were built from door skins, but due
to pressure from the environmentalist Home Depot stopped carrying them, so I
went with the particle board tables.
This summer between shows I think I'm going to seriously consider trying
some of these foam based tables.
jt
--
James J. Trobaugh
North Georgia LEGO Train Club
http://www.ngltc.org
Frank Filz <ffilz@mindspring.com> wrote in message
news:3A72633F.1EA4116E@mindspring.com...
> "James J. Trobaugh" wrote:
> >
> > I don't know about other groups but the biggest pain for me with our • club is
> > the loading/unloading of the heavy tables. Recently there has been some • talk
> > on my local NMRA discussion group about lightweight foam top tables
> > (Styrofoam --EXTRUDED foam such as "Dow Board", "blue-board, etc. -- as
> > used in building material, not beaded foam which is too weak.)
> >
> > From what I've gathered the idea is that you would have a strong frame • maybe
> > wood or some type carbon resin beams, then either a mesh or framed • supports
> > in the middle and the foam board for the top. You wouldn't put anything
> > super heavy on this but heck it would defiantly hold some buildings, • track
> > and some trains. I'm waiting for one of the NMRA members to send me the • name
> > of a book that talks about how to build such tables in detail.
> >
> > Has anyone seen such a table or maybe even built one themselves?
>
> The table I built for an HO train layout used this kind of foam board. I
> built a frame out of 1x3 lumber. The top was anywhere from 2-4 1/2"
> layers of foam (I couldn't get the 1" thick material it would be a
> little stronger). My table was sectional with the largest unit being
> 2'x5'. A 2'x5' section has 2 cross braces, so the frame looks like:
>
> +-----+-------+---------+
> | | | |
> | | | |
> | | | |
> +-----+-------+---------+
>
> These tables are quite strong, if you look on this page:
>
> http://www.mindspring.com/~ffilz/Lego/apartment.html
>
> In the 2nd picture, you will see 3 of the sections (2 2'x5' and one
> 2'x4') forming a shelf holding a huge pile of unopened LEGO sets.
> Currently that table is holding the equivalent of over 40 huge sets (and
> they mostly aren't light ones either, 5 4565, 3 8480, 1 8880, 2 or 3
> each of the UCS sets and Millennium Falcon for example). I don't think
> I've ever stood on one of these, but you probably can if you're gentle.
> I don't think you'll have any weight problems even if you built a
> substantial LEGO mountain. The table top in the 1st picture is also 3
> layers of foam, but it has boards and such under it (the real purpose
> was to store the extra foam that had been intended for mountain building
> on the HO layout, though it also gave me an easily cut and man handled
> 4'x6' table top). I think a 1/2" layer would be strong enough for most
> purposes, but one might want a 1" layer if you plan on building LEGO
> mountains.
>
> There is another advantage besides weight in using this scheme. Your
> table tops can be constructed without any power tools without too much
> masochism (cutting the 1x3 lumber by hand would be tiresome but doable).
> A power drill (with screwdriver capability), carpenters glue, screws or
> nails, any kind of power saw (I used a chop saw), and a knife will work
> just dandy. To cut the foam board, you score once with a knife and then
> snap.
>
> Another advantage is that they will probably result in quieter train
> running than plywood.
>
> I actually need to think about convincing our folks to go this way for
> the tables we will be building. The foam board doesn't even cost that
> much, it's at least comparable to plywood, and may be cheaper than A-B
> plywood, though a 1" think top wouldn't be too much lighter than the
> 3/8" plywood specced for the PNLTC tables (which is also plenty strong).
>
> Frank
|
|
Message has 1 Reply:
 | | Re: Lightweight show tables
|
| (...) 5/8" is WAY thicker than you need, and particle board is heavier than plywood. The 3/8" that PNLTC specs is probably a good choice, though 1/4" is thick enough also. Frank (24 years ago, 27-Jan-01, to lugnet.trains)
|
Message is in Reply To:
| | Re: Lightweight show tables
|
| (...) The table I built for an HO train layout used this kind of foam board. I built a frame out of 1x3 lumber. The top was anywhere from 2-4 1/2" layers of foam (I couldn't get the 1" thick material it would be a little stronger). My table was (...) (24 years ago, 27-Jan-01, to lugnet.trains)
|
13 Messages in This Thread:
  
 
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
