Subject:
|
Re: Rotation Sensor Values
|
Newsgroups:
|
lugnet.robotics.rcx.legos
|
Date:
|
Mon, 24 Jul 2000 23:37:06 GMT
|
Viewed:
|
1590 times
|
| |
|
|
On Mon, 24 Jul 2000, Andy Gombos wrote:
> Hee, Hee. It was 0.2.3, not 0.2.4.
phew :) Had me scared there for a while. I'll probably still take a look
at it later- I just didn't want to have caused a bug so soon after
starting to apply patches.
Luis
> Here is the code snippet that setup and read
> the values. The current(working) code takes out the refresh, and changes the
> delay to msleep.
>
> ds_active(&SENSOR_2);
> ds_rotation_on(&SENSOR_2);
> ds_rotation_set(&SENSOR_2,0);
> while(1){
> lcd_number(ROTATION_2,sign,e0);
> lcd_refresh();
> delay(50);
> }
> return 0;
>
> Andy
> In lugnet.robotics.rcx.legos, Luis Villa writes:
> > On Mon, 24 Jul 2000, Andy Gombos wrote:
> > > I added back in the display code, and left out the lcd_refreshes. Then I got • a
> > > proper counter. I wonder why the refresh was throwing the reading off.
> >
> > That's a good question. Is this the latest tarball? If so, there have been
> > some modifications to the refresh loop, and this may indicate a bug in
> > them. In other words, it could be the double sets of lcd_refresh()
> > and not the actual reading that was bad. Could you post both sets of code,
> > so that we can take a look at them?
> > Luis
> >
> >
> > > In lugnet.robotics.rcx.legos, Andy Gombos writes:
> > > > Well, I do not know if I have to have code to display the values. I do not • get
> > > > anything on
> > > > screen when I run this code. If I put a loop, and with every loop, the • sensor
> > > > value is being displayed, then I get the values mentioned before. I run the
> > > > initialization steps also, and still get the bogus values.
> > > >
> > > > Andy
> > > > In lugnet.robotics.rcx.legos, Luis Villa writes:
> > > > > On Mon, 24 Jul 2000, Andy Gombos wrote:
> > > > >
> > > > > > I was reading about rotation sensors for legOS for a new robot, and
> > > > > > thought I'd try it out. So, I made a simple program that would show
> > > > > > rotation sensor values on the display. What I got was not what I
> > > > > > expected. I have never used the rotation sensors in legOS before, so I
> > > > > > do not know if this behavior was expected. Anyway, I got values of
> > > > > > 9999, -9999, 64, and -64 (more that once). I think that these values
> > > > > > correspond to the RAW values that I got from switchinf quadrants in
> > > > > > the sensor. Are these the expected values, or are you supposed to get
> > > > > > 0,1,2, -5,2, like in the regular lego firmware?
> > > > >
> > > > > Andy-
> > > > > Have you set up the rotation sensors correctly? You need to do a few
> > > > > things before you get reasonable values for the rotation sensor.
> > > > >
> > > > > 1) use ds_active(&SENSOR_1) to turn on the sensor.
> > > > > 2) use ds_rotation_on(&SENSOR_1) to turn on the rotation processing in the
> > > > > kernel.
> > > > > 3) use ds_rotation_set(&SENSOR_1, int X) to set the sensor to X. I believe
> > > > > that the default for this is undefined, so unless you use rotation set at
> > > > > least once, you could easily get an undefined value > 9999 or < -9999.
> > > > >
> > > > > Once you've done all that, what you should see is just a counter, noting
> > > > > the number of sixteenths of rotations that have occurred. (i.e., when the
> > > > > counter reads 16, one rotation will have occurred.)
> > > > >
> > > > > Hope that helps- please let us know if you still have problems-
> > > > > Luis
> > > > >
> > > > > -----------------------------------------------------------------------
> > > > >
> > > > > "Summertime... and the living is easy...
> > > > > fish are jumping and the cotton is high...
> > > > > So hush, little baby, baby don't you cry."
> > > > > -Ella
> > > > >
> > > > > -----------------------------------------------------------------------
> > >
> > >
> >
> > -----------------------------------------------------------------------
> >
> > "Summertime... and the living is easy...
> > fish are jumping and the cotton is high...
> > So hush, little baby, baby don't you cry."
> > -Ella
> >
> > -----------------------------------------------------------------------
>
>
-----------------------------------------------------------------------
"Summertime... and the living is easy...
fish are jumping and the cotton is high...
So hush, little baby, baby don't you cry."
-Ella
-----------------------------------------------------------------------
|
|
Message has 1 Reply:
 | | Re: Rotation Sensor Values
|
| I figured you would be glad that I was not running 0.2.4. I cannot get it to compile correctly, so I use 0.2.3 instead. The two full programs are below, in case you wanted to see them in full. Andy ----This one does not work---- #include <dsensor.h> (...) (24 years ago, 25-Jul-00, to lugnet.robotics.rcx.legos)
|
Message is in Reply To:
| | Re: Rotation Sensor Values
|
| Hee, Hee. It was 0.2.3, not 0.2.4. Here is the code snippet that setup and read the values. The current(working) code takes out the refresh, and changes the delay to msleep. ds_active(&SENSOR_2); ds_rotation_on(&SENSOR_2); (...) (24 years ago, 24-Jul-00, to lugnet.robotics.rcx.legos)
|
16 Messages in This Thread:
  
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
