Subject:
|
Re: Rotation Sensor Values
|
Newsgroups:
|
lugnet.robotics.rcx.legos
|
Date:
|
Mon, 24 Jul 2000 19:12:48 GMT
|
Viewed:
|
1685 times
|
| |
|
|
I added back in the display code, and left out the lcd_refreshes. Then I got a
proper counter. I wonder why the refresh was throwing the reading off.
Thanks for all your help,
Andy
In lugnet.robotics.rcx.legos, Andy Gombos writes:
> Well, I do not know if I have to have code to display the values. I do not get
> anything on
> screen when I run this code. If I put a loop, and with every loop, the sensor
> value is being displayed, then I get the values mentioned before. I run the
> initialization steps also, and still get the bogus values.
>
> Andy
> In lugnet.robotics.rcx.legos, Luis Villa writes:
> > On Mon, 24 Jul 2000, Andy Gombos wrote:
> >
> > > I was reading about rotation sensors for legOS for a new robot, and
> > > thought I'd try it out. So, I made a simple program that would show
> > > rotation sensor values on the display. What I got was not what I
> > > expected. I have never used the rotation sensors in legOS before, so I
> > > do not know if this behavior was expected. Anyway, I got values of
> > > 9999, -9999, 64, and -64 (more that once). I think that these values
> > > correspond to the RAW values that I got from switchinf quadrants in
> > > the sensor. Are these the expected values, or are you supposed to get
> > > 0,1,2, -5,2, like in the regular lego firmware?
> >
> > Andy-
> > Have you set up the rotation sensors correctly? You need to do a few
> > things before you get reasonable values for the rotation sensor.
> >
> > 1) use ds_active(&SENSOR_1) to turn on the sensor.
> > 2) use ds_rotation_on(&SENSOR_1) to turn on the rotation processing in the
> > kernel.
> > 3) use ds_rotation_set(&SENSOR_1, int X) to set the sensor to X. I believe
> > that the default for this is undefined, so unless you use rotation set at
> > least once, you could easily get an undefined value > 9999 or < -9999.
> >
> > Once you've done all that, what you should see is just a counter, noting
> > the number of sixteenths of rotations that have occurred. (i.e., when the
> > counter reads 16, one rotation will have occurred.)
> >
> > Hope that helps- please let us know if you still have problems-
> > Luis
> >
> > -----------------------------------------------------------------------
> >
> > "Summertime... and the living is easy...
> > fish are jumping and the cotton is high...
> > So hush, little baby, baby don't you cry."
> > -Ella
> >
> > -----------------------------------------------------------------------
|
|
Message has 1 Reply:
 | | Re: Rotation Sensor Values
|
| (...) That's a good question. Is this the latest tarball? If so, there have been some modifications to the refresh loop, and this may indicate a bug in them. In other words, it could be the double sets of lcd_refresh() and not the actual reading (...) (24 years ago, 24-Jul-00, to lugnet.robotics.rcx.legos)
|
Message is in Reply To:
| | Re: Rotation Sensor Values
|
| Well, I do not know if I have to have code to display the values. I do not get anything on screen when I run this code. If I put a loop, and with every loop, the sensor value is being displayed, then I get the values mentioned before. I run the (...) (24 years ago, 24-Jul-00, to lugnet.robotics.rcx.legos)
|
16 Messages in This Thread:
  
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
