 | | Re: moving in a straight line with two motors?
|
|
Tim, Instead of using the differential for angle sensors, why not use it to allow a single motor to drive both wheels? Then a single angle sensor coupled with a motor could drive the steering mechanism. This setup would be very similar to a radio (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) At one point, in the distant past, I saw plans for a gear box that used either 2 or 3 differentials, I do not remember which. 2 motors were used, 1 to drive both axles, one for steering. axle1 == motor1 + motor2 axle2 == motor1 - motor2 With (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Direct Motor driver
|
|
Thanks to the fine people who figured the memory mapped motor I/O address to be 0xf000 and who determined the controlling bitmaps, I wrote a native motor driver today. See (URL) missing for a V0.1 kernel release: - task switcher IRQ reassignment (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | RE: moving in a straight line with two motors?
|
|
-----Original Message----- From: Eric Brandwine [SMTP:ericb@mitre.org] Sent: Friday, November 13, 1998 8:39 AM To: John Scott Kjellman Cc: lego-robotics@crynwr.com Subject: Re: moving in a straight line with two motors? <snip> (...) I don't think it (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
From: John Scott Kjellman <jkjellman@ameritech.net> (...) The main downside with this approach is that you can't turn on axis (so your vehicle will no longer have a turning radius of 0). When I first got the mindstorms I thought that it would be (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) eh> -----Original Message----- (...) eh> I don't think it works that way. Will hooking 2 motors to the same power eh> source provide twice as much power? I think the limiting factor is the eh> current from the power source, not the number of (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) There needs to be a link to this somewhere: Peter Phillips pointed out a long while back (my messages from him are dated Sep 21) that the specs to the chip are here: (...) drivers. I don't know if he told the rest of the list about this, if (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Buy online in UK
|
|
I am looking for a place to buy the Logo Robotics Construction Kit, and I have found great online stores in the US, but I believe UK will be cheaper for me being in europe. Any good, reliable, online stores to recommend? thank you, Simen Svale (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
Op een zekere dag, te weten Fri, 13 Nov 1998 17:21:08 GMT, klom lego-robotics@crynwr.com (Alex Wetmore) in het toetsenbord en schreef ons: (...) But you don't have to drive two weels. When you make one wheel for steering (thus making a (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) Aha. For those that can't be bothered to look, maximum output is 600 mA. It also tells us what the bits at 0xf000 do: 10: forwards 01: backwards 11: short (i.e. brake) 00: off (i.e. freewheel) Cheers, Ben. (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) The problem with this is that you now have a car-style turning radius (determined by front wheel deflection and traction) instead of a tank-style turning radius (essentially zero). Daniel "Dan'l" Miller Senior, School of Aeronautics and (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
I believe you are thinking of Leo Dorst's adder/subtractor. I had been eyeing this myself for use with mindstorms, since it would seem to solve the "differing motor RPM phenomena" problem. (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Homebrew sensors?
|
|
I've been brainstorming for a while about what could be done with a kludge. I'm more into the whoosh-bang side of engineering than the beep-zap, so I don't know if it would work... A few years ago, Estes (the model rocket people) made a "rocket (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) kp> There needs to be a link to this somewhere: kp> Peter Phillips pointed out a long while back (my messages from him are kp> dated Sep 21) that the specs to the chip are here: (...) kp> drivers. OK, 500mA per driver. Which, if the rest of my (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) This all depends. The table you gave (presumably from the date sheet), said: (...) Now, Lego uses Off to mean Brake and Float to Off ... (...) Well, you can set the motor to "float" and you do coast. (...) Please explain why there is (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: moving in a straight line with two motors?
|
|
(...) Hm. So I just reviewed the data sheet again, and it seems that there is indeed a significant current when the motor is shorted. That sucks. -Kekoa (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: Homebrew sensors?
|
|
Daniel Miller wrote in message ... (...) Daniel, I could not help but notice that you are into rockets. If so, then whoosh-bang is not the way to go. I think bang-whoosh makes a much better rocket since it should have a loud ignition, then a (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | Re: Homebrew sensors?
|
|
There is a single channel sound sensor on my web page: (URL) was really designed for picking up loud noises like claps. What you want would require two mics and a circuit that would take the difference between the sound levels. Better yet it should (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | The IR beacon, was Re: Homebrew sensors?
|
|
(...) The light sensor is directional without a tunnel. I use the IR tower as a beacon. I've got a perl script that listens for RCX messages. Here's the normal sequence of events: 1. RCX sends the message 2 "Turn on your beacon, so I can find you" (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|
| |
 | | RE: coasting moters in nqcc
|
|
Hello all, In reading about moving in a straight line tread there was an issue related to the motor being off, on, or float. If off sets into brake mode and float does really turn them off. I thought that using float for time that the motors are (...) (28 years ago, 13-Nov-98, to lugnet.robotics)
|