To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.roboticsOpen lugnet.robotics in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Robotics / *22449 (-10)
  RE: Motors spinning at startup
 
I also tried all sorts of capacitors, etc. in an attempt at solving this problem. While the capacitors helped to minimize the length of time before the motors calmed down, there was always a short period of motor craziness that never went away. I (...) (26 years ago, 30-Jun-00, to lugnet.robotics.handyboard)
 
  Re: Motors spinning at startup
 
I have been having the same motors spinning on powerup "problem" with my Handyboard. I tried various capacitor combinations on my modified servo motors to no effect. Fred M. finally provided the answer: (...) In short, there is nothing wrong with (...) (26 years ago, 30-Jun-00, to lugnet.robotics.handyboard)
 
  Re: sonar and overflow
 
Hi I think that the longest distance your able to measure is about 2.7m. The counter is 16 bit long and has no sign. But the integer is has a sign, so you can only use 15 bits, which is 32768. The counter increases each 0.5ns (pink book). Sound (...) (26 years ago, 30-Jun-00, to lugnet.robotics.handyboard)
 
  sonar and overflow
 
Greetings all, Has anyone managed to work out some code which checks the overflow bit for the counter used in the polaroid sonar code? At the moment mine distance readings seem to be maxing out around 1.5m or so, and I'm not sure if it's the timer (...) (26 years ago, 30-Jun-00, to lugnet.robotics.handyboard)
 
  Re: running the motors underwater
 
(...) The main problem is that the motor isn't water prof. It's rusting inside and or the grease is breaking down. The motor will heat up while in use. This would cause a sealed motor to push the air past the rotating axle. Ok, now when the motor (...) (26 years ago, 29-Jun-00, to lugnet.robotics.rcx)
 
  Re: Scout Programming
 
(...) The main challenge with this is that the light sensor is passive only. (i.e. there is no red led to create the reflected light.) You can, however, use the IR transmit to bound some light down towards it and cause the same effect. If you need (...) (26 years ago, 29-Jun-00, to lugnet.robotics.scout)
 
  running the motors underwater
 
A few years ago some kids I was working with were trying to outfit a LEGO boat with a paddle wheel and micromotor. While they were working, one kid got the idea that he was going to put a propellor onto one of the 4200 rpm motors, add wheels, and (...) (26 years ago, 29-Jun-00, to lugnet.robotics.rcx)
 
  running the motors underwater
 
A few years ago some kids I was working with were trying to outfit a LEGO boat with a paddle wheel and micromotor. While they were working, one kid got the idea that he was going to put a propellor onto one of the 4200 rpm motors, add wheels, and (...) (26 years ago, 29-Jun-00, to lugnet.robotics)
 
  Re: Unable to go into bootstrap
 
This problem is very common. Probably, your board is fine. Check this page on the Handyboard site to start off with : (URL) you have no luck with that, then try fooling with your port settings. Switch from xon-xoff to none, etc. Somewhere in there (...) (26 years ago, 29-Jun-00, to lugnet.robotics.handyboard)
 
  Unable to go into bootstrap
 
I have recently obtain a handyboard kit. This is my first board. After connecting the Ni-Cad batteries and adapter, I proceeded to download therequired .s19 file using HBDL. It was unsuccessful. The LCD screen displayed one line of brightly lighted (...) (26 years ago, 29-Jun-00, to lugnet.robotics.handyboard)

Next Page:  5 more | 10 more | 20 more
Redisplay Messages:  All | Compact

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR