Special:
|
[DAT] (requires LDraw-compatible viewer)
|
Subject:
|
Re: Part 30562 Wall 1 x 4 x 6 Corner Round (with bottom added)
|
Newsgroups:
|
lugnet.cad.dat.parts
|
Date:
|
Mon, 10 Sep 2001 17:08:04 GMT
|
Viewed:
|
1525 times
|
| |
|
|
In lugnet.cad.dat.parts, Mark Kennedy writes:
> In lugnet.cad.dat.parts, Mark Chittenden writes:
> > 99% finished, but I was hitting burn-out factor on this one. The
> > bottom needs work, for now has bottom studs in place of the boxed off
> > sections. Now, since NO WAY am I up to putting images on a curved
> > surface, it's up to someone else to 'paint' or 'skin' this with the
> > escape pod panel design from the kit Droid Escape.
>
> I would suggest using bits from part 30056 for the bottom half. That's
> what I did when I worked on the quarter panel with spherous top. Also
> I would use 1-4CYLI.DAT, 1-4EDGE.DAT, and and 1-4RING3 primitives in
> the file to reduce size.
Cool, another excuse to put the 3 months I spent on the bottom half of
30056 to some use. I don't know how you guys can zip out these parts
so fast. It took me forever to do that one piece, and I asked Steve so
many questions he might as well have done it himself.
Anyhow, I added the bottom bits and replaced a few sections with
primitives and here it is. If anyone wants to 'skin' it you just have
to replace the first big cylinder with a painted one. I don't have
the skill to do that either...
Don
0 Wall 1 x 4 x 6 Corner Round
0 Author: Mark Chittenden (Mdublade@aol.com)
0 Name: 30562.DAT
0 Part 30562
0 UnOfficial LCad Part
0
0 Cylinder walls
1 16 0 -92 0 0 0 80 0 132 0 -80 0 0 48\1-4cyli.dat
1 16 0 -92 0 0 0 76 0 132 0 -76 0 0 48\1-4cyli.dat
2 24 76 40 0 76 -92 0
2 24 80 -92 0 80 40 0
4 16 80 40 0 80 -92 0 76 -92 0 76 40 0
2 24 0 40 -76 0 -92 -76
2 24 0 -92 -80 0 40 -80
4 16 0 40 -80 0 -92 -80 0 -92 -76 0 40 -76
1 16 0 -92 0 0 0 76 0 132 0 -76 0 0 48\1-4edge.dat
1 16 0 40 0 0 0 76 0 132 0 -76 0 0 48\1-4edge.dat
0
0 Upper plate studs
1 16 70 -96 -10 1 0 0 0 1 0 0 0 1 stud2.dat
1 16 50 -96 -50 1 0 0 0 1 0 0 0 1 stud2.dat
1 16 10 -96 -70 1 0 0 0 1 0 0 0 1 stud2.dat
0
0 Upper plate rings and cylinders and edges
1 16 0 -96 0 20 0 0 0 1 0 0 0 -20 48\1-4ring3.dat
1 16 0 -96 0 80 0 0 0 4 0 0 0 -80 48\1-4cyli.dat
1 16 0 -96 0 60 0 0 0 4 0 0 0 -60 48\1-4cyli.dat
1 16 0 -92 0 20 0 0 0 1 0 0 0 -20 48\1-4ring3.dat
2 24 0 -96 -80 0 -96 -60
2 24 0 -96 -60 0 -92 -60
2 24 0 -92 -60 0 -92 -76
2 24 0 -92 -80 0 -96 -80
4 16 0 -96 -80 0 -92 -80 0 -92 -60 0 -96 -60
2 24 80 -96 0 60 -96 0
2 24 60 -96 0 60 -92 0
2 24 60 -92 0 76 -92 0
2 24 80 -92 0 80 -96 0
4 16 80 -96 0 80 -92 0 60 -92 0 60 -96 0
1 16 0 -96 0 60 0 0 0 1 0 0 0 -60 48\1-4edge.dat
1 16 0 -96 0 80 0 0 0 1 0 0 0 -80 48\1-4edge.dat
1 16 0 -92 0 60 0 0 0 1 0 0 0 -60 48\1-4edge.dat
0
0
0 Base borrowed from 30056.dat with slight modifications to top edges.
0
0 notch level surface edges
2 24 75.845 44 -4 75.35 44 -9.92
2 24 75.35 44 -9.92 73.41 44 -19.67
2 24 73.41 44 -19.67 71.943 44 -24.4
2 24 71.943 44 -24.4 75.468 44 -26.026
2 24 75.468 44 -26.026 73.912 44 -30.616
2 24 73.912 44 -30.616 70.738 44 -37.045
2 24 70.738 44 -37.045 67.199 44 -35.5
2 24 67.199 44 -35.5 65.816 44 -38
2 24 65.816 44 -38 60.298 44 -46.269
2 24 60.298 44 -46.269 53.74 44 -53.74
2 24 53.74 44 -53.74 46.269 44 -60.298
2 24 46.269 44 -60.298 38 44 -65.816
2 24 38 44 -65.816 35.5 44 -67.199
2 24 35.5 44 -67.199 37.045 44 -70.738
2 24 37.045 44 -70.738 30.616 44 -73.912
2 24 30.616 44 -73.912 26.026 44 -75.468
2 24 26.026 44 -75.468 24.4 44 -71.943
2 24 24.4 44 -71.943 19.67 44 -73.41
2 24 19.67 44 -73.41 9.92 44 -75.35
2 24 9.92 44 -75.35 4 44 -75.845
2 24 4 44 -75.845 4 44 -63.875
2 24 4 44 -63.875 8.354 44 -63.452
2 24 8.354 44 -63.452 16.564 44 -61.819
2 24 16.564 44 -61.819 24.492 44 -59.128
2 24 24.492 44 -59.128 27.5 44 -58.026
2 24 27.5 44 -58.026 25.337 44 -54.261
2 24 25.337 44 -54.261 30 44 -51.96
2 24 30 44 -51.96 35.982 44 -47.968
2 24 35.982 44 -47.968 37.997 44 -51.5
2 24 37.997 44 -51.5 38.963 44 -50.778
2 24 38.963 44 -50.778 45.254 44 -45.254
2 24 45.254 44 -45.254 50.778 44 -38.963
2 24 50.778 44 -38.963 51.5 44 -37.997
2 24 51.5 44 -37.997 47.968 44 -35.982
2 24 47.968 44 -35.982 51.96 44 -30
2 24 51.96 44 -30 54.261 44 -25.337
2 24 54.261 44 -25.337 58.026 44 -27.5
2 24 58.026 44 -27.5 59.128 44 -24.492
2 24 59.128 44 -24.492 61.819 44 -16.564
2 24 61.819 44 -16.564 63.452 44 -8.354
2 24 63.452 44 -8.354 63.875 44 -4
2 24 63.875 44 -4 75.845 44 -4
0 very bottom surfaces edges
0 bottom right U edges
2 24 80 48 0 79.316 48 -10.442
2 24 79.316 48 -10.442 77.272 48 -20.704
2 24 77.272 48 -20.704 75.468 48 -26.026
2 24 75.468 48 -26.026 71.943 48 -24.4
2 24 71.943 48 -24.4 73.41 48 -19.67
2 24 73.41 48 -19.67 75.35 48 -9.92
2 24 75.35 48 -9.92 75.845 48 -4
2 24 75.845 48 -4 63.875 48 -4
2 24 63.875 48 -4 63.452 48 -8.354
2 24 63.452 48 -8.354 61.819 48 -16.564
2 24 61.819 48 -16.564 59.128 48 -24.492
2 24 59.128 48 -24.492 58.026 48 -27.5
2 24 58.026 48 -27.5 54.261 48 -25.337
2 24 54.261 48 -25.337 55.433 48 -22.961
2 24 55.433 48 -22.961 57.956 48 -15.529
2 24 57.956 48 -15.529 59.487 48 -7.832
2 24 59.487 48 -7.832 60 48 0
0 bottom left U edges
2 24 0 48 -80 10.442 48 -79.316
2 24 10.442 48 -79.316 20.704 48 -77.272
2 24 20.704 48 -77.272 26.026 48 -75.468
2 24 26.026 48 -75.468 24.4 48 -71.943
2 24 24.4 48 -71.943 19.67 48 -73.41
2 24 19.67 48 -73.41 9.92 48 -75.35
2 24 9.92 48 -75.35 4 48 -75.845
2 24 4 48 -75.845 4 48 -63.875
2 24 4 48 -63.875 8.354 48 -63.452
2 24 8.354 48 -63.452 16.564 48 -61.819
2 24 16.564 48 -61.819 24.492 48 -59.128
2 24 24.492 48 -59.128 27.5 48 -58.026
2 24 27.5 48 -58.026 25.337 48 -54.261
2 24 25.337 48 -54.261 22.961 48 -55.433
2 24 22.961 48 -55.433 15.529 48 -57.956
2 24 15.529 48 -57.956 7.832 48 -59.487
2 24 7.832 48 -59.487 0 48 -60
0 bottom front loop edges
2 24 70.738 48 -37.045 69.28 48 -40
2 24 69.28 48 -40 63.472 48 -48.704
2 24 63.472 48 -48.704 56.568 48 -56.568
2 24 56.568 48 -56.568 48.704 48 -63.472
2 24 48.704 48 -63.472 40 48 -69.28
2 24 40 48 -69.28 37.045 48 -70.738
2 24 37.045 48 -70.738 35.5 48 -67.199
2 24 35.5 48 -67.199 38 48 -65.816
2 24 38 48 -65.816 46.269 48 -60.298
2 24 46.269 48 -60.298 53.74 48 -53.74
2 24 53.74 48 -53.74 60.298 48 -46.269
2 24 60.298 48 -46.269 65.816 48 -38
2 24 65.816 48 -38 67.199 48 -35.5
2 24 67.199 48 -35.5 70.738 48 -37.045
0 bottom back loop edges
2 24 51.5 48 -37.997 50.778 48 -38.963
2 24 50.778 48 -38.963 45.254 48 -45.254
2 24 45.254 48 -45.254 38.963 48 -50.778
2 24 38.963 48 -50.778 37.997 48 -51.5
2 24 37.997 48 -51.5 35.982 48 -47.968
2 24 35.982 48 -47.968 36.528 48 -47.604
2 24 36.528 48 -47.604 42.426 48 -42.426
2 24 42.426 48 -42.426 47.604 48 -36.528
2 24 47.604 48 -36.528 47.968 48 -35.982
2 24 47.968 48 -35.982 51.5 48 -37.997
0 vertical notch edges
2 24 71.943 44 -24.4 71.943 48 -24.4
2 24 75.468 44 -26.026 75.468 48 -26.026
2 24 67.199 44 -35.5 67.199 48 -35.5
2 24 70.738 44 -37.045 70.738 48 -37.045
2 24 37.045 44 -70.738 37.045 48 -70.738
2 24 35.5 44 -67.199 35.5 48 -67.199
2 24 26.026 44 -75.468 26.026 48 -75.468
2 24 24.4 44 -71.943 24.4 48 -71.943
2 24 27.5 44 -58.026 27.5 48 -58.026
2 24 25.337 44 -54.261 25.337 48 -54.261
2 24 35.982 44 -47.968 35.982 48 -47.968
2 24 37.997 44 -51.5 37.997 48 -51.5
2 24 51.5 44 -37.997 51.5 48 -37.997
2 24 47.968 44 -35.982 47.968 48 -35.982
2 24 54.261 44 -25.337 54.261 48 -25.337
2 24 58.026 44 -27.5 58.026 48 -27.5
0 vertical inner corner edges (skip these if I use 2 boxes)
2 24 63.875 44 -4 63.875 48 -4
2 24 75.845 44 -4 75.845 48 -4
2 24 4 44 -63.875 4 48 -63.875
2 24 4 44 -75.845 4 48 -75.845
0 Base cylinder optional lines (edited for the notch holes)
0 From:1 16 0 40 0 60 0 0 0 8 0 0 0 -60 48/1-4cyli.dat
5 24 59.484 40 -7.83 59.484 48 -7.83 57.954 40 -15.528 60 40 0
5 24 57.954 40 -15.528 57.954 48 -15.528 55.434 40 -22.962 59.484 40 -7.83
5 24 55.434 40 -22.962 55.434 48 -22.962 51.96 40 -30 57.954 40 -15.528
5 24 47.604 40 -36.528 47.604 48 -36.528 42.426 40 -42.426 51.96 40 -30
5 24 42.426 40 -42.426 42.426 48 -42.426 36.528 40 -47.604 47.604 40 -36.528
5 24 36.528 40 -47.604 36.528 48 -47.604 30 40 -51.96 42.426 40 -42.426
5 24 22.962 40 -55.434 22.962 48 -55.434 15.528 40 -57.954 30 40 -51.96
5 24 15.528 40 -57.954 15.528 48 -57.954 7.83 40 -59.484 22.962 40 -55.434
5 24 7.83 40 -59.484 7.83 48 -59.484 0 40 -60 15.528 40 -57.954
0 From:1 16 0 44 0 64 0 0 0 4 0 0 0 -64 48/1-4cyli.dat
5 24 63.45 44 -8.352 63.45 48 -8.352 61.818 44 -16.563 64 44 0
5 24 61.818 44 -16.563 61.818 48 -16.563 59.13 44 -24.493 63.45 44 -8.352
5 24 59.13 44 -24.493 59.13 48 -24.493 55.424 44 -32 61.818 44 -16.563
5 24 50.778 44 -38.963 50.778 48 -38.963 45.254 44 -45.254 55.424 44 -32
5 24 45.254 44 -45.254 45.254 48 -45.254 38.963 44 -50.778 50.778 44 -38.963
5 24 38.963 44 -50.778 38.963 48 -50.778 32 44 -55.424 45.254 44 -45.254
5 24 24.493 44 -59.13 24.493 48 -59.13 16.563 44 -61.818 32 44 -55.424
5 24 16.563 44 -61.818 16.563 48 -61.818 8.352 44 -63.45 24.493 44 -59.13
5 24 8.352 44 -63.45 8.352 48 -63.45 0 44 -64 16.563 44 -61.818
0 From:1 16 0 44 0 76 0 0 0 4 0 0 0 -76 48/1-4cyli.dat
5 24 75.346 44 -9.918 75.346 48 -9.918 73.408 44 -19.669 76 44 0
5 24 73.408 44 -19.669 73.408 48 -19.669 70.216 44 -29.085 75.346 44 -9.918
5 24 65.816 44 -38 65.816 48 -38 60.298 44 -46.269 70.216 44 -29.085
5 24 60.298 44 -46.269 60.298 48 -46.269 53.74 44 -53.74 65.816 44 -38
5 24 53.74 44 -53.74 53.74 48 -53.74 46.269 44 -60.298 60.298 44 -46.269
5 24 46.269 44 -60.298 46.269 48 -60.298 38 44 -65.816 53.74 44 -53.74
5 24 38 44 -65.816 38 48 -65.816 29.085 44 -70.216 46.269 44 -60.298
5 24 19.669 44 -73.408 19.669 48 -73.408 9.918 44 -75.346 29.085 44 -70.216
5 24 9.918 44 -75.346 9.918 48 -75.346 0 44 -76 19.669 44 -73.408
0 From:1 16 0 40 0 80 0 0 0 8 0 0 0 -80 48/1-4cyli.dat
5 24 79.312 40 -10.44 79.312 48 -10.44 77.272 40 -20.704 80 40 0
5 24 77.272 40 -20.704 77.272 48 -20.704 73.912 40 -30.616 79.312 40 -10.44
5 24 69.28 40 -40 69.28 48 -40 63.472 40 -48.704 73.912 40 -30.616
5 24 63.472 40 -48.704 63.472 48 -48.704 56.568 40 -56.568 69.28 40 -40
5 24 56.568 40 -56.568 56.568 48 -56.568 48.704 40 -63.472 63.472 40 -48.704
5 24 48.704 40 -63.472 48.704 48 -63.472 40 40 -69.28 56.568 40 -56.568
5 24 40 40 -69.28 40 48 -69.28 30.616 40 -73.912 48.704 40 -63.472
5 24 20.704 40 -77.272 20.704 48 -77.272 10.44 40 -79.312 30.616 40 -73.912
5 24 10.44 40 -79.312 10.44 48 -79.312 0 40 -80 20.704 40 -77.272
0 Included primitives
0 Top of base edges
1 16 0 40 0 60 0 0 0 1 0 0 0 -60 48\1-4edge.dat
0 Removed 1 16 0 40 0 80 0 0 0 1 0 0 0 -80 48\1-4edge.dat
0 Base Sides
0 Inlined and slightly modified: 1 16 0 44 0 0 1 0 0 0 0 0 0 0 rect.dat
2 24 0 40 -76 0 40 -60
2 24 0 40 -60 0 48 -60
2 24 0 48 -60 0 48 -80
2 24 0 48 -80 0 40 -80
4 16 0 40 -80 0 48 -80 0 48 -60 0 40 -60
0 Inlined and slightly modified: 1 16 70 44 0 10 0 0 0 0 0 0 1 0 rect.dat
2 24 76 40 0 60 40 0
2 24 60 40 0 60 48 0
2 24 60 48 0 80 48 0
2 24 80 48 0 80 40 0
4 16 80 40 0 80 48 0 60 48 0 60 40 0
0
0 Top of base ring surface
1 16 0 40 0 20 0 0 0 1 0 0 0 -20 48\1-4ring3.dat
0 bottom right U surface
4 16 80 48 0 75.845 48 -4 63.875 48 -4 60 48 0
4 16 80 48 0 79.316 48 -10.442 75.35 48 -9.92 75.845 48 -4
4 16 79.316 48 -10.442 77.272 48 -20.704 73.41 48 -19.67 75.35 48 -9.92
4 16 77.272 48 -20.704 75.468 48 -26.026 71.943 48 -24.4 73.41 48 -19.67
4 16 63.875 48 -4 63.452 48 -8.354 59.487 48 -7.832 60 48 0
4 16 63.452 48 -8.354 61.819 48 -16.564 57.956 48 -15.529 59.487 48 -7.832
4 16 61.819 48 -16.564 59.128 48 -24.492 55.433 48 -22.961 57.956 48 -15.529
4 16 59.128 48 -24.492 58.026 48 -27.5 54.261 48 -25.337 55.433 48 -22.961
0 bottom left U surface
4 16 0 48 -80 4 48 -75.845 4 48 -63.875 0 48 -60
4 16 0 48 -80 10.442 48 -79.316 9.92 48 -75.35 4 48 -75.845
4 16 10.442 48 -79.316 20.704 48 -77.272 19.67 48 -73.41 9.92 48 -75.35
4 16 20.704 48 -77.272 26.026 48 -75.468 24.4 48 -71.943 19.67 48 -73.41
4 16 4 48 -63.875 8.354 48 -63.452 7.832 48 -59.487 0 48 -60
4 16 8.354 48 -63.452 16.564 48 -61.819 15.529 48 -57.956 7.832 48 -59.487
4 16 16.564 48 -61.819 24.492 48 -59.128 22.961 48 -55.433 15.529 48 -57.956
4 16 24.492 48 -59.128 27.5 48 -58.026 25.337 48 -54.261 22.961 48 -55.433
0 bottom front loop surface
4 16 70.738 48 -37.045 69.28 48 -40 65.816 48 -38 67.199 48 -35.5
4 16 69.28 48 -40 63.472 48 -48.704 60.298 48 -46.269 65.816 48 -38
4 16 63.472 48 -48.704 56.568 48 -56.568 53.74 48 -53.74 60.298 48 -46.269
4 16 56.568 48 -56.568 48.704 48 -63.472 46.269 48 -60.298 53.74 48 -53.74
4 16 48.704 48 -63.472 40 48 -69.28 38 48 -65.816 46.269 48 -60.298
4 16 40 48 -69.28 37.045 48 -70.738 35.5 48 -67.199 38 48 -65.816
0 bottom back loop surface
4 16 51.5 48 -37.997 50.778 48 -38.963 47.604 48 -36.528 47.968 48 -35.982
4 16 50.778 48 -38.963 45.254 48 -45.254 42.426 48 -42.426 47.604 48 -36.528
4 16 45.254 48 -45.254 38.963 48 -50.778 36.528 48 -47.604 42.426 48 -42.426
4 16 38.963 48 -50.778 37.997 48 -51.5 35.982 48 -47.968 36.528 48 -47.604
0 Cylinder surfaces edited for the notch holes.
0 From:1 16 0 40 0 60 0 0 0 8 0 0 0 -60 48/1-4cyli.dat
4 16 60 40 0 59.484 40 -7.83 59.484 48 -7.83 60 48 0
4 16 59.484 40 -7.83 57.954 40 -15.528 57.954 48 -15.528 59.484 48 -7.83
4 16 57.954 40 -15.528 55.434 40 -22.962 55.434 48 -22.962 57.954 48 -15.528
4 16 55.434 40 -22.962 54.261 44 -25.337 54.261 48 -25.337 55.434 48 -22.962
4 16 55.434 40 -22.962 51.96 40 -30 51.96 44 -30 54.261 44 -25.337
4 16 51.96 40 -30 47.604 40 -36.528 47.968 44 -35.982 51.96 44 -30
4 16 47.604 40 -36.528 47.604 48 -36.528 47.968 48 -35.982 47.968 44 -35.982
4 16 47.604 40 -36.528 42.426 40 -42.426 42.426 48 -42.426 47.604 48 -36.528
4 16 42.426 40 -42.426 36.528 40 -47.604 36.528 48 -47.604 42.426 48 -42.426
4 16 35.982 48 -47.968 36.528 48 -47.604 36.528 40 -47.604 35.982 44 -47.968
4 16 30 44 -51.96 35.982 44 -47.968 36.528 40 -47.604 30 40 -51.96
4 16 25.337 44 -54.261 30 44 -51.96 30 40 -51.96 22.962 40 -55.434
4 16 22.962 48 -55.434 25.337 48 -54.261 25.337 44 -54.261 22.962 40 -55.434
4 16 22.962 40 -55.434 15.528 40 -57.954 15.528 48 -57.954 22.962 48 -55.434
4 16 15.528 40 -57.954 7.83 40 -59.484 7.83 48 -59.484 15.528 48 -57.954
4 16 7.83 40 -59.484 0 40 -60 0 48 -60 7.83 48 -59.484
0 From:1 16 0 44 0 64 0 0 0 4 0 0 0 -64 48/1-4cyli.dat
4 16 63.875 44 -4 63.45 44 -8.352 63.45 48 -8.352 63.875 48 -4
4 16 63.45 44 -8.352 61.818 44 -16.563 61.818 48 -16.563 63.45 48 -8.352
4 16 61.818 44 -16.563 59.13 44 -24.493 59.13 48 -24.493 61.818 48 -16.563
4 16 59.13 44 -24.493 58.026 44 -27.5 58.026 48 -27.5 59.13 48 -24.493
4 16 51.5 44 -37.997 50.778 44 -38.963 50.778 48 -38.963 51.5 48 -37.997
4 16 50.778 44 -38.963 45.254 44 -45.254 45.254 48 -45.254 50.778 48 -38.963
4 16 45.254 44 -45.254 38.963 44 -50.778 38.963 48 -50.778 45.254 48 -45.254
4 16 37.997 48 -51.5 38.963 48 -50.778 38.963 44 -50.778 37.997 44 -51.5
4 16 24.493 48 -59.13 27.5 48 -58.026 27.5 44 -58.026 24.493 44 -59.13
4 16 24.493 44 -59.13 16.563 44 -61.818 16.563 48 -61.818 24.493 48 -59.13
4 16 16.563 44 -61.818 8.352 44 -63.45 8.352 48 -63.45 16.563 48 -61.818
4 16 8.352 44 -63.45 4 44 -63.875 4 48 -63.875 8.352 48 -63.45
0 From:1 16 0 44 0 76 0 0 0 4 0 0 0 -76 48/1-4cyli.dat
4 16 75.845 44 -4 75.346 44 -9.918 75.346 48 -9.918 75.845 48 -4
4 16 75.346 44 -9.918 73.408 44 -19.669 73.408 48 -19.669 75.346 48 -9.918
4 16 73.408 44 -19.669 71.943 44 -24.4 71.943 48 -24.4 73.408 48 -19.669
4 16 67.199 44 -35.5 65.816 44 -38 65.816 48 -38 67.199 48 -35.5
4 16 65.816 44 -38 60.298 44 -46.269 60.298 48 -46.269 65.816 48 -38
4 16 60.298 44 -46.269 53.74 44 -53.74 53.74 48 -53.74 60.298 48 -46.269
4 16 53.74 44 -53.74 46.269 44 -60.298 46.269 48 -60.298 53.74 48 -53.74
4 16 46.269 44 -60.298 38 44 -65.816 38 48 -65.816 46.269 48 -60.298
4 16 35.5 48 -67.199 38 48 -65.816 38 44 -65.816 35.5 44 -67.199
4 16 19.669 48 -73.408 24.4 48 -71.943 24.4 44 -71.943 19.669 44 -73.408
4 16 19.669 44 -73.408 9.918 44 -75.346 9.918 48 -75.346 19.669 48 -73.408
4 16 9.918 44 -75.346 4 44 -75.845 4 48 -75.845 9.918 48 -75.346
0 From:1 16 0 40 0 80 0 0 0 8 0 0 0 -80 48/1-4cyli.dat
4 16 80 40 0 79.312 40 -10.44 79.312 48 -10.44 80 48 0
4 16 79.312 40 -10.44 77.272 40 -20.704 77.272 48 -20.704 79.312 48 -10.44
4 16 77.272 40 -20.704 75.468 44 -26.026 75.468 48 -26.026 77.272 48 -20.704
4 16 77.272 40 -20.704 73.912 40 -30.616 73.912 44 -30.616 75.468 44 -26.026
4 16 73.912 40 -30.616 69.28 40 -40 70.738 44 -37.045 73.912 44 -30.616
4 16 69.28 40 -40 69.28 48 -40 70.738 48 -37.045 70.738 44 -37.045
4 16 69.28 40 -40 63.472 40 -48.704 63.472 48 -48.704 69.28 48 -40
4 16 63.472 40 -48.704 56.568 40 -56.568 56.568 48 -56.568 63.472 48 -48.704
4 16 56.568 40 -56.568 48.704 40 -63.472 48.704 48 -63.472 56.568 48 -56.568
4 16 48.704 40 -63.472 40 40 -69.28 40 48 -69.28 48.704 48 -63.472
4 16 37.045 48 -70.738 40 48 -69.28 40 40 -69.28 37.045 44 -70.738
4 16 30.616 44 -73.912 37.045 44 -70.738 40 40 -69.28 30.616 40 -73.912
4 16 26.026 44 -75.468 30.616 44 -73.912 30.616 40 -73.912 20.704 40 -77.272
4 16 20.704 48 -77.272 26.026 48 -75.468 26.026 44 -75.468 20.704 40 -77.272
4 16 20.704 40 -77.272 10.44 40 -79.312 10.44 48 -79.312 20.704 48 -77.272
4 16 10.44 40 -79.312 0 40 -80 0 48 -80 10.44 48 -79.312
0 vertical notch surfaces
4 16 71.943 44 -24.4 71.943 48 -24.4 75.468 48 -26.026 75.468 44 -26.026
4 16 67.199 44 -35.5 67.199 48 -35.5 70.738 48 -37.045 70.738 44 -37.045
4 16 37.045 44 -70.738 37.045 48 -70.738 35.5 48 -67.199 35.5 44 -67.199
4 16 26.026 44 -75.468 26.026 48 -75.468 24.4 48 -71.943 24.4 44 -71.943
4 16 27.5 44 -58.026 27.5 48 -58.026 25.337 48 -54.261 25.337 44 -54.261
4 16 35.982 44 -47.968 35.982 48 -47.968 37.997 48 -51.5 37.997 44 -51.5
4 16 51.5 44 -37.997 51.5 48 -37.997 47.968 48 -35.982 47.968 44 -35.982
4 16 54.261 44 -25.337 54.261 48 -25.337 58.026 48 -27.5 58.026 44 -27.5
0 vertical inner side surfaces (skip these if I use 2 boxes)
4 16 63.875 44 -4 63.875 48 -4 75.845 48 -4 75.845 44 -4
4 16 4 44 -63.875 4 48 -63.875 4 48 -75.845 4 44 -75.845
0 notch level inside bottom surface
4 16 75.845 44 -4 75.35 44 -9.92 63.452 44 -8.354 63.875 44 -4
4 16 75.35 44 -9.92 73.41 44 -19.67 61.819 44 -16.564 63.452 44 -8.354
4 16 73.41 44 -19.67 71.943 44 -24.4 59.128 44 -24.492 61.819 44 -16.564
4 16 71.943 44 -24.4 75.468 44 -26.026 73.912 44 -30.616 70.738 44 -37.045
4 16 70.738 44 -37.045 67.199 44 -35.5 59.128 44 -24.492 71.943 44 -24.4
4 16 67.199 44 -35.5 65.816 44 -38 58.026 44 -27.5 59.128 44 -24.492
4 16 65.816 44 -38 51.96 44 -30 54.261 44 -25.337 58.026 44 -27.5
4 16 65.816 44 -38 51.5 44 -37.997 47.968 44 -35.982 51.96 44 -30
4 16 65.816 44 -38 60.298 44 -46.269 50.778 44 -38.963 51.5 44 -37.997
4 16 60.298 44 -46.269 53.74 44 -53.74 45.254 44 -45.254 50.778 44 -38.963
4 16 4 44 -63.875 8.354 44 -63.452 9.92 44 -75.35 4 44 -75.845
4 16 8.354 44 -63.452 16.564 44 -61.819 19.67 44 -73.41 9.92 44 -75.35
4 16 16.564 44 -61.819 24.492 44 -59.128 24.4 44 -71.943 19.67 44 -73.41
4 16 37.045 44 -70.738 30.616 44 -73.912 26.026 44 -75.468 24.4 44 -71.943
4 16 24.492 44 -59.128 24.4 44 -71.943 37.045 44 -70.738 35.5 44 -67.199
4 16 24.492 44 -59.128 27.5 44 -58.026 38 44 -65.816 35.5 44 -67.199
4 16 27.5 44 -58.026 25.337 44 -54.261 30 44 -51.96 38 44 -65.816
4 16 30 44 -51.96 35.982 44 -47.968 37.997 44 -51.5 38 44 -65.816
4 16 37.997 44 -51.5 38.963 44 -50.778 46.269 44 -60.298 38 44 -65.816
4 16 38.963 44 -50.778 45.254 44 -45.254 53.74 44 -53.74 46.269 44 -60.298
0
0
|
|
Message has 1 Reply:
Message is in Reply To:
 | | Re: Part 30562 Wall 1 x 4 x 6 Corner Round
|
| (...) I would suggest using bits from part 30056 for the bottom half. That's what I did when I worked on the quarter panel with spherous top. Also I would use 1-4CYLI.DAT, 1-4EDGE.DAT, and and 1-4RING3 primitives in the file to reduce size. (23 years ago, 10-Sep-01, to lugnet.cad.dat.parts)
|
5 Messages in This Thread:
  
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
