| | | | | John VanZwieten wrote in message ...
> So at 7 studs minimum across for a two-seater cockpit X 5 = 35 studs across.
> I threw together a quick mock-up of what such a beast might look like. I
> created a 15 X 15 quarter hull and a 7 stud wide cockpit piece. The cockpit
> definitely stands out as too wide compared to pics of the MF, but as a Lego
> model might work. LMKWYT.
Well, the Millenium Falcon model on my page is built exactly to minifig
scale. The math alone almost killed me when I built it (measure length of
random part from book; convert to length in lego; measure lego; add to
model). For the record, when I did my calculations, I based a minifig on
being 6 feet tall. Anyway, some of the more important dimensions:
Length: 24" (77 studs)
Width: 17 1/4" (56 studs)
Cockpit width: 2 1/2" (8 studs)
And of course pictures are at
http://www.geocities.com/SoHo/Lofts/9639/swlego.html
:Derek
| | | | | | | | | | | | | In lugnet.starwars, Derek Schin writes:
> Well, the Millenium Falcon model on my page is built exactly to minifig
> scale. <snip>
> And of course pictures are at
> http://www.geocities.com/SoHo/Lofts/9639/swlego.html
That's very cool! I like the control station in the lounge. I wish you had a
round 4x4 plate for the holo-chess table. Chewie is an interesting
improvisation too.
Okay, now for the hard part: how many pieces is it? :)
-Tom McD.
when replying add syrup to the spamcake.
| | | | | | | | | | | | | | | | | | | Tom McDonald wrote in message ...
> Okay, now for the hard part: how many pieces is it? :)
I really wish I knew. Since I never plan on taking it apart, I'll probably
never know, either. As for modeling it in LDraw...I don't think so. We're
certainly talking about thousands of pieces here.
:Derek
| | | | | | | | | | | | | | | | | | | | | | | | for the cockpit of a falcon. how about using the cockpit pieces from the
aquanaut subs.
they look close and they fit with the octogonal walls.
or TLG could make something colse to those that is more like the real MF.
| | | | | | | | | | | | | | | | | | | | | > That's very cool! I like the control station in the lounge. I wish you had a
> round 4x4 plate for the holo-chess table.
would the 4 x 4 round with holes from the y-wing engines work?
| | | | | | | | | | | | | | | | | | | | | I used an old 4x4 turntable (without the 4x4 bottom plate) with a grid of blue
and white 1x1 tiles on top. So far it's the closest, I've come up with.
Ben
In lugnet.starwars, Jonathan Wilson writes:
> > That's very cool! I like the control station in the lounge. I wish you had a
> > round 4x4 plate for the holo-chess table.
> would the 4 x 4 round with holes from the y-wing engines work?
| | | | | | | | | | | | | | | | | | | | | | | | In lugnet.starwars, Ben Fleskes writes:
> I used an old 4x4 turntable (without the 4x4 bottom plate) with a grid of blue
> and white 1x1 tiles on top. So far it's the closest, I've come up with.
That's an interesting idea Ben... it almost sounds like they could eat chinese
food on the Falcon now that the entire table rotates! :)
> In lugnet.starwars, Jonathan Wilson writes:
> > > That's very cool! I like the control station in the lounge. I wish you had a
> > > round 4x4 plate for the holo-chess table.
> > would the 4 x 4 round with holes from the y-wing engines work?
I thought about that last night when I was taking apart my Y-wing. It could
work, but anything 1 brick high is kinda thick for a table in minifig scale.
Yet, it might be better to use a 4x4 disc because I don't recall that any of
those old 4x4 plateless turntables were made in grey (though I could be wrong).
I've only seen them in white, black and red.
-Tom McD.
| | | | | | | | | | | | | | | | | | | | | | On Thu, 22 Apr 1999 10:41:22 GMT, "jonathan wilson" <wilsonj@xoommail.com>
wrote:
> > That's very cool! I like the control station in the lounge. I wish you had a
> > round 4x4 plate for the holo-chess table.
> would the 4 x 4 round with holes from the y-wing engines work?
More likely, the round disk with cross-axle hole from CyberSlam (and
others).
Steve
| | | | | | | | | | | | | | | | | | | | In lugnet.starwars, Steve Bliss writes:
> On Thu, 22 Apr 1999 10:41:22 GMT, "jonathan wilson" <wilsonj@xoommail.com>
> wrote:
>
> > > That's very cool! I like the control station in the lounge. I wish you had a
> > > round 4x4 plate for the holo-chess table.
> > would the 4 x 4 round with holes from the y-wing engines work?
>
> More likely, the round disk with cross-axle hole from CyberSlam (and
> others).
What about using one of those Throwbot disc things. Are they Lego compatable
or just useless?
Jason
| | | | | | | | | | | | | | | | | | | | Utterly, completely useless! No Lego compatibility. Does anyone want
some?
Scott Sanburn
Jason Fabisch wrote:
>
> In lugnet.starwars, Steve Bliss writes:
> > On Thu, 22 Apr 1999 10:41:22 GMT, "jonathan wilson" <wilsonj@xoommail.com>
> > wrote:
> >
> > > > That's very cool! I like the control station in the lounge. I wish you had a
> > > > round 4x4 plate for the holo-chess table.
> > > would the 4 x 4 round with holes from the y-wing engines work?
> >
> > More likely, the round disk with cross-axle hole from CyberSlam (and
> > others).
>
> What about using one of those Throwbot disc things. Are they Lego compatable
> or just useless?
>
> Jason
| | | | | | | | | | | | | | | |
| |
| In lugnet.starwars, Derek Schin writes:
>
>
> Well, the Millenium Falcon model on my page is built exactly to minifig
> scale. The math alone almost killed me when I built it (measure length of
> random part from book; convert to length in lego; measure lego; add to
> model). For the record, when I did my calculations, I based a minifig on
> being 6 feet tall. Anyway, some of the more important dimensions:
>
> Length: 24" (77 studs)
> Width: 17 1/4" (56 studs)
> Cockpit width: 2 1/2" (8 studs)
>
> And of course pictures are at
> http://www.geocities.com/SoHo/Lofts/9639/swlego.html
This was one of the first sites I found last year when I went searching for
Lego on the net, and I was blown away! You can rest assured that the TLG
version of the MF will not be as nice as yours. Do you still have the model
built? This would make a great (though daunting) LDraw project.
After looking at the landspeeder, I'm convinced the cockpit could be done at 6
studs (or maybe 6.25) width with a special piece. This would reduce the
minimum width of a TLG model to 30 studs (35 would look much better), which
should be doable for less than $100.
-John Van
| | | | | | | | | | | | | | | | | A few comments, keep in mind, dimensions of the Millennium Falcon vary by as
much as 40% depending on what source to use. But if you scale it based on the
8 studs as the width of the cockpit you come up with number pretty close to
what Derek mentions below.
Regarding a six stud wide cockpit. That would work if you had a square cross
section, but the cockpit is supposed to be round. Thus you need a six stud
wide area the full sitting height of the minifig. That drives the width up to
8 studs in diameter.
Ben
> >
> > Length: 24" (77 studs)
> > Width: 17 1/4" (56 studs)
> > Cockpit width: 2 1/2" (8 studs)
<snip>
>
> After looking at the landspeeder, I'm convinced the cockpit could be done at 6
> studs (or maybe 6.25) width with a special piece. This would reduce the
> minimum width of a TLG model to 30 studs (35 would look much better), which
> should be doable for less than $100.
>
> -John Van
| | | | | | | | | | | | | | | | | |
| |
| Ben Fleskes wrote in message ...
> A few comments, keep in mind, dimensions of the Millennium Falcon vary by as
> much as 40% depending on what source to use. But if you scale it based on the
> 8 studs as the width of the cockpit you come up with number pretty close to
> what Derek mentions below.
If it's correctly to scale. As Steve pointed out, a cockpit to overall size
ratio of 1:5 would be the minimum necessary without it looking ridiculous. I
doubt TLG would be as concerned about exact dimensions as Derek was. If they
can make a model look good enough to sell, they will.
>
> Regarding a six stud wide cockpit. That would work if you had a square cross
> section, but the cockpit is supposed to be round. Thus you need a six stud
> wide area the full sitting height of the minifig. That drives the width up to
> 8 studs in diameter.
Actually you need a 5 stud width at the butt level of the cockpit, 6.?? at the
arm level, and 4.5-5 stud width at the head level. Hopefully Chewie will be
taller than a normal minifig, so some extra clearance would be needed. I'll
play around in LDraw with a couple of minifigs and a cylindar and let you know
what I come up with.
-John Van
| | | | | | | | | | | | | | | | | | | | | John VanZwieten wrote in message ...
>
> If it's correctly to scale. As Steve pointed out, a cockpit to overall size
> ratio of 1:5 would be the minimum necessary without it looking ridiculous. I
> doubt TLG would be as concerned about exact dimensions as Derek was. If they
> can make a model look good enough to sell, they will.
True, but I did measure their Y-Wing to see how far off it was from the
correct scale, and you know what? It was really close. Everything except
the cockpit was dead-on. Of course, the cockpit was a bit wrong, but I'll
be fixing that on the Y-Wing I have.
:Derek
| | | | | | | | | | | | | | | | | | |
| |
| On Wed, 21 Apr 1999 14:49:46 GMT, "Ben Fleskes" <benfleskes@msn.com> wrote:
> A few comments, keep in mind, dimensions of the Millennium Falcon vary by as
> much as 40% depending on what source to use. But if you scale it based on the
> 8 studs as the width of the cockpit you come up with number pretty close to
> what Derek mentions below.
>
> Regarding a six stud wide cockpit. That would work if you had a square cross
> section, but the cockpit is supposed to be round. Thus you need a six stud
> wide area the full sitting height of the minifig. That drives the width up to
> 8 studs in diameter.
You are correct, but that's assuming the cockpit tube is nearly circular.
If the tube was built to 'suggest' a circular cross-section, it could be
smaller than 8 studs across.
0000
00 00
0 0
0 0
00 00
0000
This would be very cramped.
Other than a totally special piece, the easiest solution is to use the
octagonal corridor pieces (example at
<http://home.att.net/~partsref/images/2466.gif>) and create an 8-wide,
6-high tube.
This still leaves the problem of the cockpit canopy/nose. The TIE Fighter
porthole wouldn't cut it for this application. It would work, but it would
be ugly (ugly=not like the real thing).
Steve
| | | | | | |