To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.dactaOpen lugnet.dacta in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Dacta / 270
269  |  271
Subject: 
Re: ControlLab 70909 Interface (9751?) VB.NET Class (DLL)
Newsgroups: 
lugnet.dacta
Date: 
Mon, 11 Jan 2010 02:23:03 GMT
Viewed: 
19900 times
  
In lugnet.dacta, Brian Bachmeier wrote:

I did some quick testing on the LegoMultiCLI program that you posted. I was able
to connect two CLIs to my computer as follows:

CLI 1: connected to COM1 serial port
CLI 2: connected to COM6 (using USB to Serial adaptor)

I ran the program and selected the appropriate COM ports and then hit the Start
button.  I had a touch sensor connected to port 1 on CLI 1.
When I pressed the touch sensor, the output 1 did start properly on CLI 2.
When I released the touch sensor though, the output remained on.  The input
light on CLI 1 would toggle on and off with each press of the sensor, but the
output on CLI 2 only reponded to the first press.

I moved the touch sensor to CLI 2 and it had the same effect where the output on
CLI 1 only responded to the first press.

Any ideas?

I will try to get VB installed in the next couple days so that I can view the
source code files to help with some testing.

Brian


Thank you Brian.  I made a mistake and corrected it I think.  So you can
download the updated file (same name) from the same url mentionned before.

But according to what your saying, it sounds good.

Thank you very much for your interest.

Yves



Message has 1 Reply:
  Re: ControlLab 70909 Interface (9751?) VB.NET Class (DLL)
 
(...) Brian, I just put in the BOX folder the LegoMultiCLISource.zip file that is the Source for the Multiple CLIs test demo project. Thank you again for your help. (15 years ago, 11-Jan-10, to lugnet.dacta)

Message is in Reply To:
  Re: ControlLab 70909 Interface (9751?) VB.NET Class (DLL)
 
(...) I did some quick testing on the LegoMultiCLI program that you posted. I was able to connect two CLIs to my computer as follows: CLI 1: connected to COM1 serial port CLI 2: connected to COM6 (using USB to Serial adaptor) I ran the program and (...) (15 years ago, 10-Jan-10, to lugnet.dacta)

17 Messages in This Thread:



Entire Thread on One Page:
Nested:  All | Brief | Compact | Dots
Linear:  All | Brief | Compact

This Message and its Replies on One Page:
Nested:  All | Brief | Compact | Dots
Linear:  All | Brief | Compact
    

Custom Search

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR