Subject:
|
Re: installation of cygwin and legos/brickos
|
Newsgroups:
|
lugnet.robotics.rcx.legos
|
Date:
|
Mon, 9 Dec 2002 13:21:10 GMT
|
Viewed:
|
3228 times
|
| |
|
|
John,
It looks as if you don't have the cross compiler or it is is not in a known
directory. Try searching your entire hard drive for h8300. That might
bring something up. You should have either tired to build the cross compiler
or downloaded it from hitachi's web site.
Ed
John wrote:
------------------------------------------------------------------------
Thanks for your help Ed, this looks promising I am using legos-0.2.6,
and
win 98
- I did the changes you suggested, and then rebuilt the cross compiler,
and
re-checked the changes made had not been altered in the 2 common files.
Then I ran makeclean - seemed ok and followed this with make depend
which
gave the output below (less the top 2 lines.) I think that this is
moving
the right way, are any other changes in the files suggested by the
"h8300-hitachi-hms-gcc: not found" and other errors?
I have listed the commands used and the output from these during the
"try
it" section in the legos installation instructions. This may help in
diagnosis of the problem.
Error summary from below:
h8300-hitachi-hms-gcc: not found
make[1]: *** [depend] Error 127
make: *** [depend] Error 2
make[2]: *** [memcpy.o] Error 255
make[1]: *** [libc.a] Error 2
make: *** [all] Error 2
../boot/legos.srec: failed to open
Thanks again, John.
make[1]: Entering directory `/legos-0.2.6/util'
make - --unix -w -C dll-src depend
make[2]: Entering directory `/legos-0.2.6/util/dll-src'
gcc -M -O2 -Wall -D_WIN32 -I. -I../../include/lnp -c loader.c rcxtty.c
keepalive
.c ../../kernel/lnp.c lx.c convert.c srec.c srecload.c lx.c >.depend
../../kernel/lnp.c:117:9: warning: multi-line string literals are
deprecated
make[2]: Leaving directory `/legos-0.2.6/util/dll-src'
make - --unix -w -C firmdl depend
make[2]: Entering directory `/legos-0.2.6/util/firmdl'
make[2]: Nothing to be done for `depend'.
make[2]: Leaving directory `/legos-0.2.6/util/firmdl'
make[1]: Leaving directory `/legos-0.2.6/util'
make[1]: Entering directory `/legos-0.2.6/lib'
make[1]: Nothing to be done for `depend'.
make[1]: Leaving directory `/legos-0.2.6/lib'
make[1]: Entering directory `/legos-0.2.6/boot'
h8300-hitachi-hms-gcc -M -I/legos-0.2.6/include
-I/legos-0.2.6/include/lnp
-I. /
legos-0.2.6/kernel/*.c > .depend
h8300-hitachi-hms-gcc: not found
make[1]: *** [depend] Error 127
make[1]: Leaving directory `/legos-0.2.6/boot'
make: *** [depend] Error 2
then the make command
$ make
for i in util lib boot demo ; do make - --unix -C $i || exit 2 ; done
make[1]: Entering directory `/legos-0.2.6/util'
gcc fontdesign.c -o fontdesign.exe -O2 -Wall -D_WIN32
make - --unix -w -C dll-src || exit 2
make[2]: Entering directory `/legos-0.2.6/util/dll-src'
gcc -o loader.o -c loader.c -O2 -Wall -D_WIN32 -I. -I../../include/lnp
gcc -o rcxtty.o -c rcxtty.c -O2 -Wall -D_WIN32 -I. -I../../include/lnp
gcc -o keepalive.o -c keepalive.c -O2 -Wall -D_WIN32 -I.
-I../../include/lnp
gcc -o lnp.o -c ../../kernel/lnp.c -O2 -Wall -D_WIN32 -I.
-I../../include/lnp
../../kernel/lnp.c:117:9: warning: multi-line string literals are
deprecated
gcc -o lx.o -c lx.c -O2 -Wall -D_WIN32 -I. -I../../include/lnp
gcc -o ../dll.exe loader.o rcxtty.o keepalive.o lnp.o lx.o -O2 -Wall
-D_WIN32 -
I. -I../../include/lnp
1 or 2 missed lines
make[2]: Entering directory `/legos-0.2.6/util/firmdl'
gcc -O2 -Wall -D_WIN32 -c -o mkimg.o mkimg.c
mkimg.c: In function `srec_load':
mkimg.c:63: warning: implicit declaration of function `exit'
gcc -O2 -Wall -D_WIN32 -c -o srec.o srec.c
gcc mkimg.o srec.o -o mkimg.exe -O2 -Wall -D_WIN32
./mkimg fastdl.srec > fastdl.h
gcc -O2 -Wall -D_WIN32 -c -o firmdl.o firmdl.c
gcc -O2 -Wall -D_WIN32 -c -o rcx_comm.o rcx_comm.c
gcc firmdl.o srec.o rcx_comm.o -o ../firmdl3.exe -O2 -Wall -D_WIN32
make[2]: Leaving directory `/legos-0.2.6/util/firmdl'
make[1]: Leaving directory `/legos-0.2.6/util'
make[1]: Entering directory `/legos-0.2.6/lib'
make - --unix -w -C c || exit 2
make[2]: Entering directory `/legos-0.2.6/lib/c'
h8300-hitachi-hms-gcc -O2 -fno-builtin -fomit-frame-pointer -Wall
-I/legos-0.2.6
/include -I/legos-0.2.6/include/lnp -I. -c memcpy.c -o memcpy.o
make[2]: *** [memcpy.o] Error 255
make[2]: Leaving directory `/legos-0.2.6/lib/c'
make[1]: *** [libc.a] Error 2
make[1]: Leaving directory `/legos-0.2.6/lib'
make: *** [all] Error 2
$ cd util
$ make strip
strip fontdesign.exe dll.exe makelx.exe fixdeps.exe genlds.exe
firmdl3.exe
$ export RCXTTY=USB
$ ls
Makefile dll-src firmdl3.exe fontdesign.exe merge-map
Makefile.bak dll.exe fixdeps.exe genlds.exe
Makefile.common firmdl fontdesign.c makelx.exe
$ firmdl3 ../boot/legos.srec
../boot/legos.srec: failed to open
- searched the directory and the file legos.srec did not appear
anywhere
(recursive) under the cygwin directory.
Ed Manlove <emanlove@ieee.org> wrote in message
news:H6sxFx.A9J@lugnet.com...
> John,
>
> What version of legOS are you using? Looking at the code below it seems • to
> indicate that you are using legOS ver 0.2.6 (unless in the newer versions • of
> brickOS we forgot to change a directory name). I am also going to gues • that
> you are using Windows 98. If these two assumptions are correct, then your
> problem lies in that legOS 0.2.6 does not properly identify Windows 98. I
> have described the problem here on this newsgroup and within the new
> development for brickOS the team has redesigned the "which OS is this user
> running code". This is done by creating a configure script which
> automatically detects the cross compiler tools. This feature was added in
> brickOS 0.2.6.08.
>
> So you have two options. First is to upgrade to a newer version of • brickOS
> which I recommend at some point. But since it is in various stages of
> development you might wait for now?
>
> The second option is to make two slight modifications to the • Makefile.common
> files. You will need to add the result of the command uname to a couple • of
> files. For my version of cygwin 1.3 running under windows 98 I get the
> following
>
> emanlove@OEMCOMPUTER ~
> $ uname
> CYGWIN_98-4.10
>
> emanlove@OEMCOMPUTER ~
> $
>
> If you get something different use that instead in the instructions here.
> In the files /legos-0.2.6/Makefile.common and
> /legos-0.2.6/util/Makefile.common there is a couple of checks for cygwin
> versions. The first is for the older Cygwin version B-20 and the second • for
> Cygwin 1.1(+). Modify the second one (around line 50) by adding
> CYGWIN_98-4.10 to the list of OS to check. Thus that line shound look • like
>
>
> #
> # Cygwin 1.1
> #
> ifneq (,$(findstring $(OSTYPE),CYGWIN_NT-4.0 CYGWIN_NT-5.0 CYGWIN_NT-5.1
> CYGWIN_98-4.10))
>
> TOOLPREFIX=h8300-hitachi-hms-
>
> Do the same for the check in the file /legos-0.2.6/util/Makefile.common,
> about line 25 as shown here.
>
> #
> # WindowsNT/Cygnwin, test against several values:
> #
> ifneq (,$(findstring $(OSTYPE),cygwin32 cygwin WindowsNT Windows_NT
> CYGWIN_98-4.10))
> EXT=.exe
> CC =gcc
> CFLAGS+=-D_WIN32
> endif
>
> This should fix your problem. For those interested, the clue that to • John's
> problem was that the cygwin version was looking for cc and not gcc which • it
> should be.
>
> Ed
>
>
>
> John <john.ormerod@NOSPAM.virgin.net> wrote in message
> news:H6ryvv.G3x@lugnet.com...
> > I have previously reported problems in installing cygwin and legos, and • have
> > tried again to get this up and running.
> > I believe that cygwin is not properly installed and have included
> > information here on all modules included and error messages when I try • to
> > make. Any help would be appreciated with this.
> >
> >
> > Having attempted 2 further installations of Cygwin, I have still got
> > problems running Cygwin specifically when attempting to build the • example
> > programs. I first installed the standard list of modules suggested in • the
> > download instructions but got errors which lugnet postings identified as • due
> > to the lack of Java (pcre) modules, so additionally installed these • using
> > the installer (over internet). This still had problems so I decided to • start
> > over, and deleted all Cygwin folders and files, including the log files • from
> > the previous installations. I did not however change the dos path which
> > Cygwin had changed in the previous installation and I also assume that • the
> > unix path would have been set up correctly as part of the install • process -
> > I did check using set and it seemed to have relevant entries.
> > I then reinstalled with the cygwin setup utility with the list of • modules
> > below (at end of this posting)
> >
> > On checking the Cygwin installation log file, the following comes up
> > repeatedly "compress_bz::error called"
> >
> > I included the modules listed below, and now get the following errors • when
> I
> > attempt to build:
> >
> > make realclean [- no errors apparent]
> > make depend [gives the following]
> >
> > $ make depend
> > for i in util lib boot demo ; do make - --unix NODEPS=yes -C $i depend • ||
> exit 2
> > ; done
> > make[1]: Entering directory `/legos-0.2.6/util'
> > make - --unix -w -C dll-src depend
> > make[2]: Entering directory `/legos-0.2.6/util/dll-src'
> > cc -M -O2 -Wall -I. -I../../include/lnp -c loader.c rcxtty.c keepalive.c • ../../k
> > ernel/lnp.c lx.c convert.c srec.c srecload.c lx.c >.depend
> > cc: not found
> > make[2]: *** [depend] Error 127
> > make[2]: Leaving directory `/legos-0.2.6/util/dll-src'
> > make[1]: *** [depend] Error 2
> > make[1]: Leaving directory `/legos-0.2.6/util'
> > make: *** [depend] Error 2
> >
> > $ make
> > for i in util lib boot demo ; do make - --unix -C $i || exit 2 ; done
> > make[1]: Entering directory `/legos-0.2.6/util'
> > cc fontdesign.c -o fontdesign -O2 -Wall
> > make[1]: *** [fontdesign] Error 255
> > make[1]: Leaving directory `/legos-0.2.6/util'
> > make: *** [all] Error 2
> >
> > I am missing something, but cant work out what this might be. The • install
> > process was followed closely, and all the required modules have been
> > installed. I would really like to get this going, to allow access to • more
> > variables and faster execution, and would appreciate any help anyone • could
> > provide.
> >
> > Current Installed modules.
> >
> > ash
> > autoconf
> > autoconf-devel
> > autoconf-stable
> > automake
> > automake-devel
> > automake-stable
> > base-files
> > base-passwd
> > bash
> > bintutils
> > cpio
> > cygwin
> > diff
> > diffutils
> > ed
> > file
> > fileutils
> > findutils
> > flex
> > gawk
> > gcc
> > gcc-mingw
> > gdbm
> > grep
> > gzip
> > less
> > libiconv2
> > libintl1
> > libintl2
> > libncurses5
> > libncurses6
> > libreadline4
> > libreadline5
> > login
> > make
> > mingw-runtime
> > ncurses
> > patch
> > pcre
> > readline
> > sed
> > sh-utils
> > tar
> > termcap
> > terminfo
> > textinfo
> > textutils
> > time
> > vim
> > w32api
> > which
> > zlib
> > _update-info-dir
>
>
|
|
Message is in Reply To:
 | | Re: installation of cygwin and legos/brickos
|
| John, What version of legOS are you using? Looking at the code below it seems to indicate that you are using legOS ver 0.2.6 (unless in the newer versions of brickOS we forgot to change a directory name). I am also going to gues that you are using (...) (22 years ago, 8-Dec-02, to lugnet.robotics.rcx.legos)
|
4 Messages in This Thread:
  
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
