Subject:
|
10,000 Elements: 2200+ plates, 850+ slopes
|
Newsgroups:
|
lugnet.market.auction
|
Date:
|
Wed, 29 Sep 1999 13:26:10 GMT
|
Viewed:
|
487 times
|
| |
|
|
Christopher's LEGO parts auction V:
I have taken bits and pieces from my previous auctions and the ones
that I participate in as a buyer for this format.
10 Sept 99: Any listing without a bid can be bid on at any level.
If no one else wants it for more, you can buy things for a penny a
piece. This was a little unclear since I failed to mention it and
failed to include starting bids.
19 Sept 99: I was asked about precedence when bids are for the same
amount and whether the top or the bottom of the list indicated
precedence. The earlier bids have precedence over later bids of
the same amount. Bids for more, of course, always have precedence
over bids for less. The auction listings should be read top to
bottom in order of precedence. The first x of the item will go to
the highest person on the list. The next person gets his order
filled if possible from the remaining (if any) elements of that
type. If you are at the bottom, it means that everyone else gets
their before you.
22 Sept 99: I am removing some items with no bids. The listing is
large enough and there is no point cluttering it up with junk that
no one wants.
Each lot listing will consist of: the number of lots on offer, a
description of the pieces on offer in these lots, and lines listing
the bidders on these lots. In most cases, a lot will consist of an
element and if I have n of those elements I will also be auctioning
n lots of that element. Each bidder may specify the amount of their
bid and the quantity of lots being bid upon. All bidders pay the
price of the lowest successful bid. A listing of this type might look
like this:
60 blue 2x4 bricks with clip-joint axles on ends
10 numo @ .45
40 ntwo @ .25
10 nuth @ .15
60 nuth @ .05
showing that bidder numo will get the first ten for $1.50 (but was
willing to pay up to $4.50) and that bidder ntwo will get 40 of them
for $6.00 (but was willing to pay $10.00) and that bidder nuth gets
the remaining 10 for $1.50 (and would have taken any number that he
could have got for $.05 each).
In other cases I am auctioning a single lot with a mix of stuff.
The price per is still listed to keep everything consistent, but it
doesn't make the same kind of sense. An example of this is:
1 assortment of minifig weapons. There are two black hatchets,
three silver great swords, a lt grey ninja sword, and a black
spear. You are buying this whole lot.
1 numo @ 1.70
1 ntwo @ 1.35
1 nuth @ 1.00
showing that numo won the bid at $1.70 for the lot of weapons.
This system mostly allows you to negotiate the exact winnings that
you want, rather than having to buy the lot sizes that I set up.
All bids and figures are in $US which is the form of payment I
require. Money order and cashier's check payments result in fastest
shipping. If you pay by personal check, I reserve the right to wait up
to ten days for the check to clear. In reality, if you're one of the
folks that I've dealt with in the past, I won't wait; but I reserve
the right from the get go.
Everything is neatly sorted before the auction goes underway so that
when it concludes, delivery will be fast. Shipping charges to US
addresses will be whatever priority or first class shipping costs
me. If you buy one 2x2 plate, it will cost you an extra $.33 for
shipping. On the other hand, I can get quite a bit into a $3.20
shipping box. Foreign bidders are welcome and will be charged whatever
the USPS charges me to get the product to you. Please do not ask me to
lie to our governments about package contents.
There will be a period of time after this auction starts when bids
accrue. After that time, lot-types will individually progress along
the open, going, goingx2, sold as no more bids come in. When a bid
is made, the status reverts to open.
This section may change from time to time. When it does, I will
start the new paragraph with the date on which the insertion was made.
Please scan through this from time to time if you are participating to
stay aware of auction policy.
If you have any questions about this auction, my practices, or the
lots being sold, please email me and I'll get back to you.
I have benefited a great deal from customer comments and as always I
welcome yours. If you see an improvement to this system or format,
I would appreciate hearing about it.
Sincerely,
Christopher L. Weeks
3504 Fox Run Dr.
Plainsboro NJ 08536-2741
clweeks@eclipse.net
---The listing---
Bricks:
9 lt grey 1x1 round bricks.
9 @ .05 jam
9 @ .02 mg
9 @ .01 joko
21 lt grey 1x1 side-studed bricks.
2 @ .05 clc5
21 @ .03 joko
21 @ .02 mg
89 lt grey 1x2 bricks.
4 @ .10 loho
60 @ .08 mg
89 @ .06 keel
20 @ .05 sull
85 @ .05 db
3 lt grey 1x6 bricks.
3 @ .20 sull
3 @ .10 mg
3 lt grey 1x8 bricks.
3 @ .40 keel
14 lt grey 2x2 bricks.
14 @ .10 sull
5 @ .06 dhar
14 @ .03 mg
8 lt grey 2x4 bricks.
8 @ .20 sull
8 @ .10 jbat
8 @ .05 mg
12 green 1x1 bricks.
12 @ .02 mg
10 green 1x2 bricks.
10 @ .04 keel
10 @ .03 mg
4 green 1x3 bricks.
2 @ .09 mg
4 @ .07 keel
5 green 1x4 bricks.
5 @ .05 keel
6 green 1x6 bricks.
6 @ .40 keel
6 @ .05 toms
7 green 2x2 bricks.
7 @ .04 mg
4 green 2x3 bricks.
4 @ .05 mg
6 green 2x4 bricks.
6 @ .07 keel
6 @ .06 mg
20 dk grey 1x1 side-studed bricks.
5 @ .05 rogr
20 @ .04 paus
20 @ .03 dfin
20 @ .01 joko
15 dk grey 1x2 bricks.
15 @ .16 keel
15 @ .15 db
15 @ .11 rogr
35 dk grey 1x4 bricks.
35 @ .20 jbat
25 @ .16 keel
10 @ .15 sull
10 dk grey 1x16 bricks.
10 @ .90 keel
10 @ .75 toms
10 dk grey 2x2 bricks.
8 @ .07 mg
10 @ .05 rogr
5 @ .05 sull
5 dk grey 2x3 bricks.
5 @ .10 sull
5 @ .06 rogr
20 dk grey 2x4 bricks.
20 @ .20 jbat
20 @ .16 keel
10 @ .15 sull
10 dk grey 2x2 L bricks w/ 1 1x1 corner missing.
10 @ .16 keel
10 @ .15 rogr
5 @ .14 mg
10 @ .12 kewi
10 @ .11 toms
52 white 1x1 bricks.
30 @ .03 mg
50 @ .01 dfin
18 white 1x1 round bricks.
2 @ .05 clc5
18 @ .03 keel
18 @ .02 mako
18 @ .01 dfin
66 white 1x1 side-studded bricks.
10 @ .10 jam
30 @ .04 dfin
40 @ .03 paus
3 white 1x1x5 tall bricks.
3 @ .50 db
3 @ .20 dfin
3 @ .02 paus
65 white 1x2 bricks.
35 @ .03 mg
65 @ .02 rogr
30 @ .01 paus
9 white 1x3 bricks.
5 @ .04 mg
9 @ .03 keel
32 white 1x4 bricks.
25 @ .02 mg
12 white 1x6 bricks.
10 @ .05 mg
2 @ .02 dfin
2 white 1x8 bricks.
2 @ .15 toms
2 @ .12 mg
3 white 1x10 bricks.
3 @ .19 keel
3 @ .18 kewi
41 white 2x2 bricks.
41 @ .01 john
30 @ .01 dfin
15 white 2x3 bricks.
15 @ .02 mmag
15 @ .01 john
30 white 2x4 bricks.
30 @ .03 john
30 @ .01 joko
3 white 2x6 bricks.
3 @ .03 dfin
30 blue 1x1 bricks.
30 @ .01 rogr
10 blue 1x1 round bricks.
8 @ .03 dfin
10 @ .02 kewi
10 @ .01 paus
19 blue 1x1 side-studded bricks.
19 @ .04 paus
10 @ .03 mako
76 blue 1x2 bricks.
76 @ .02 rogr
76 @ .01 db
31 blue 1x3 bricks.
31 @ .02 rogr
31 @ .01 keel
25 blue 1x4 bricks.
25 @ .01 rogr
8 blue 1x6 bricks.
8 @ .01 db
5 blue 1x8 bricks.
5 @ .01 keel
82 blue 2x2 bricks.
82 @ .01 john
23 blue 2x3 bricks.
23 @ .01 john
33 blue 2x4 bricks.
30 @ .04 dhar
33 @ .02 rogr
33 @ .01 john
16 blue 2x6 bricks.
16 @ .01 rogr
5 blue 2x8 bricks.
5 @ .02 mako
4 red 1x1 round bricks.
4 @ .01 dfin
40 red 1x2 bricks.
40 @ .01 john
15 red 1x3 bricks.
5 @ .02 mg
10 @ .01 kewi
25 red 1x4 bricks.
20 @ .02 mg
25 @ .01 jvan
6 red 1x6 bricks.
6 @ .03 jvan
51 red 2x2 bricks.
51 @ .02 jvan
51 @ .01 john
14 red 2x3 bricks.
14 @ .03 jvan
14 @ .01 john
25 red 2x4 bricks.
20 @ .04 dhar
25 @ .03 jvan
25 @ .01 john
1 red 2x10 brick.
1 @ .05 keel
1 @ .04 mako
1 @ .01 joko
70 yellow 1x1 bricks.
50 @ .01 mg
56 yellow 1x1 round bricks.
56 @ .04 mako
52 @ .02 mg
90 yellow 1x2 bricks.
50 @ .02 mg
90 @ .01 db
4 yellow 1x6 bricks.
4 @ .02 keel
4 @ .01 db
14 yellow 1x8 bricks.
14 @ .04 mako
73 yellow 2x2 bricks.
73 @ .01 john
18 yellow 2x3 bricks.
18 @ .01 john
44 yellow 2x4 bricks.
44 @ .05 jbat
44 @ .04 mako
44 @ .01 john
2 yellow 2x6 bricks.
2 @ .05 jbat
8 yellow 2x8 bricks.
8 @ .10 jbat
6 yellow 2x10 bricks.
6 @ .10 jbat
3 yellow 2x2 L bricks w/ a 1x1 corner missing.
3 @ .06 mako
3 @ .05 paus
28 black 1x1 bricks.
14 @ .02 mmag
14 @ .02 mg
28 @ .01 dfin
20 black 1x1 round bricks.
15 @ .05 mg
20 @ .04 keel
20 @ .03 john
16 black 1x1 side-studded bricks.
8 @ .05 mako
4 @ .05 mmag
16 @ .04 paus
75 black 1x2 bricks.
75 @ .03 keel
75 @ .01 rogr
11 black 1x3 bricks.
10 @ .04 kewi
11 @ .03 keel
98 black 1x4 bricks.
98 @ .03 rogr
98 @ .02 toms
50 black 1x6 bricks.
20 @ .06 mmag
50 @ .05 keel
50 @ .04 rogr
8 black 1x8 bricks
8 @ .10 toms
8 @ .02 dfin
4 black 1x10 bricks.
3 @ .50 keel
4 @ .25 mako
42 black 2x2 bricks.
42 @ .01 john
12 black 2x3 bricks.
6 @ .02 mmag
12 @ .01 john
43 black 2x4 bricks.
25 @ .04 mako
40 @ .03 dhar
43 @ .03 rogr
9 black 2x6 bricks.
8 @ .03 dhar
9 @ .02 rogr
8 @ .01 dfin
5 black 8x16 bricks.
5 @1.25 mako
5 @1.20 toms
4 trans yellow 1x1 cone bricks.
2 @ .10 clc5
4 @ .05 kewi
8 trans orange 1x1 cone bricks.
8 @ .02 paus
20 trans blue 1x1 cone bricks. .
20 @ .05 paus
20 @ .04 mako
20 @ .02 paus
53 trans fl green 1x1 cone bricks.
53 @ .02 paus
Plates:
1 lt green 8x16 baseplate.
1 @ .50 dhar
1 @ .25 db
1 @ .05 paus
1 blue 8x16 baseplate.
1 @ .50 jam
1 @ .25 dfin
1 @ .05 paus
1 green 16x32 baseplate.
1 @1.50 db
1 @1.00 jays
1 @ .05 paus
20 dk grey 1x2 plates.
20 @ .10 db
10 @ .05 mg
10 dk grey 2x2 plates.
10 @ .11 rogr
10 @ .10 db
5 dk grey 2x3 plates.
5 @ .02 mg
15 dk grey 2x4 plates.
15 @ .05 jbat
12 @ .03 mg
15 @ .01 joko
5 dk grey 2x8 plates.
5 @ .10 jbat
5 @ .05 keel
5 @ .01 joko
10 dk grey 6x6 - one corner so it is 2x6+1x5+1x4+1x3+1x2 plates.
10 @ .05 mako
21 lt grey 1x1 plates.
10 @ .11 jbat
20 @ .11 mg
21 @ .10 sull
10 @ .08 rogr
14 lt grey 1x2 plates.
2 @ .08 clc5
12 @ .06 rogr
10 @ .06 mg
10 @ .05 sull
41 lt grey 1x2 plates w/ a single centered top stud.
10 @ .06 mg
10 @ .05 mmag
10 @ .05 mg
41 @ .05 rogr
6 lt grey 1x4 plates.
5 @ .06 mg
6 @ .05 rogr
6 @ .05 sull
43 lt grey 1x6 plates.
2 @ .10 clc5
43 @ .06 rogr
12 @ .05 mg
10 @ .05 sull
2 lt grey 1x8 plates.
2 @ .07 rogr
2 @ .06 keel
1 lt grey 1x10 plate.
1 @ .07 rogr
1 @ .06 keel
18 lt grey 2x2 plates.
2 @ .12 loho
18 @ .11 rogr
16 @ .05 db
15 @ .03 mg
31 lt grey 2x3 plates.
2 @ .12 loho
31 @ .11 rogr
10 @ .05 sull
30 @ .03 mg
34 lt grey 2x4 plates.
2 @ .10 clc5
34 @ .05 rogr
10 @ .05 sull
23 lt grey 2x6 plates.
2 @ .25 clc5
2 @ .12 loho
23 @ .11 rogr
18 lt grey 2x8 plates.
2 @ .15 clc5
18 @ .05 rogr
16 @ .04 dfin
10 lt grey 2x10 plates.
10 @ .11 rogr
10 @ .10 kewi
1 lt grey 2x16 plate.
1 @ .55 rogr
1 @ .50 toms
1 @ .45 joko
1 @ .25 keel
3 lt grey 4x4 plates.
3 @ .06 rogr
3 @ .05 jbat
2 @ .03 dfin
3 @ .01 joko
2 lt grey 4x6 plates.
2 @ .10 clc5
2 @ .05 rogr
11 lt grey 4x8 plates.
8 @ .35 mg
11 @ .30 rogr
8 @ .25 mg
1 lt grey 6x10 plate.
1 @ .70 mg
1 @ .65 rogr
1 @ .60 kewi
1 lt grey 6x16 plate.
1 @ .85 mg
1 @ .80 rogr
1 @ .75 kewi
12 lt grey 2x2 L plates, missing a 1x1 corner.
10 @ .06 mg
12 @ .05 rogr
5 @ .05 sull
10 @ .04 mg
2 lt grey 4x4 L plates, missing a 2x2 corner.
2 @ .05 rogr
2 @ .05 sull
2 @ .04 dfin
1 lt grey nose plate - 1x6+1x4+1x2.
1 @ .02 rogr
1 @ .01 dfin
3 lt grey 6x6 - one corner so it is 2x6+1x5+1x4+1x3+1x2 plates.
3 @ .08 paus
3 @ .06 rogr
2 pairs of lt grey 4x8 wings w/ notch out of end base. These
are each a pair (one left and one right) of 3x4+2x2+1x2 plates.
2 @ .75 clc5
1 @ .50 jam
2 @ .01 joko
6 lt grey spaceship chassis plates - 14 long by 16 wide with
eight ‘+’ shaped holes along the front.
2 @ .50 jam.
4 @ .30 mako
4 @ .25 paus
6 @ .20 mako
17 red 1x2 plates.
5 @ .03 mg
15 @ .01 dfin
5 red 1x2 plates w/ 1 centered top stud.
5 @ .03 mako
5 @ .02 dfin
30 red 1x4 plates.
10 @ .05 mg
30 @ .03 mako
30 @ .02 dfin
20 red 1x6 plates.
8 @ .06 mg
10 @ .05 mmag
20 @ .04 mako
20 @ .02 dfin
20 red 1x8 plates.
10 @ .11 mmag
18 @ .10 mg
30 red 2x2 plates.
20 @ .01 mg
10 red 2x2 plates w/ wing tabs on one side.
41 red 2x4 plates.
41 @ .03 mako
41 @ .02 dfin
20 red 2x8 plates.
10 @ .06 mg
5 @ .05 mmag
20 @ .04 mako
20 @ .03 jays
20 @ .02 dfin
6 yellow 1x1 plates.
4 @ .03 mg
6 @ .01 dfin
18 yellow 1x2 plates.
10 @ .05 mg
18 @ .04 rogr
7 yellow 1x2 plates w/ 1 centered top stud.
7 @ .04 mako
7 @ .02 dfin
4 yellow 1x3 plates.
2 @ .03 mg
4 @ .01 dfin
8 yellow 1x4 plates.
4 @ .04 mg
8 @ .03 mako
8 @ .02 dfin
3 yellow 1x6 plates.
2 @ .08 mg
3 @ .07 mako
5 yellow 1x8 plates.
5 @ .04 mako
11 yellow 2x2 plates.
8 @ .03 mako
11 @ .02 dfin
8 yellow 2x3 plates.
8 @ .02 dfin
2 yellow 2x4 plates.
2 @ .03 mako
2 @ .02 dfin
11 yellow 2x6 plates.
10 @ .04 mako
11 @ .03 dfin
13 yellow 2x8 plates.
10 @ .04 mako
13 @ .03 dfin
3 yellow 4x4 plates.
3 @ .05 mako
3 @ .03 dfin
4 yellow 4x6 plates.
4 @ .10 mako
4 @ .04 dfin
2 yellow 6x6 plates.
2 @ .10 mako
2 @ .05 dfin
3 yellow 10x10 octagonal plates with large plus shaped vacancy
in the middle.
3 @ .02 paus
5 yellow 2x2 L plates w/ 1x1 missing corner.
3 @ .03 mg
5 @ .02 dfin
5 green 1x2 plates.
4 @ .08 mg
5 @ .06 rogr
5 @ .05 keel
7 green 1x4 plates.
4 @ .14 mg
7 @ .13 rogr
7 @ .10 kewi
3 green 1x6 plates.
3 @ .15 kewi
3 @ .10 toms
4 green 1x8 plates.
4 @ .15 kewi
4 @ .10 toms
2 green 1x10 plates.
2 @ .30 kewi
2 @ .25 keel
2 @ .10 toms
1 green 2x2 plate.
1 @ .02 dfin
2 green 2x3 plates.
2 @ .05 toms
2 @ .02 dfin
3 green 2x4 plates.
3 @ .07 kewi
3 @ .05 toms
3 @ .03 dfin
1 green 2x6 plate.
1 @ .15 kewi
1 @ .10 toms
1 @ .03 dfin
1 green 2x10 plate.
1 @ .20 kewi
1 @ .15 toms
1 green 2x16 plate.
1 @ .45 keel
1 @ .40 toms
1 @ .25 keel
4 green nose plates - 1x6+1x4+1x2.
4 @ .03 dist
4 @ .02 dfin
39 blue 1x1 plates.
30 @ .03 mg
39 @ .01 dfin
72 blue 1x2 plates.
42 @ .03 mg
72 @ .01 dfin
28 blue 1x2 plates w/ single center stud.
10 @ .05 jam
10 @ .05 mmag
10 @ .04 mg
28 @ .02 dfin
31 blue 1x4 plates.
20 @ .02 dfin
10 @ .02 mg
11 blue 1x6 plates.
11 @ .03 dfin
8 blue 1x8 plates.
4 @ .04 mako
8 @ .03 dfin
5 blue 1x10 plates.
3 @ .05 mmag
4 @ .04 mako
5 @ .03 dfin
44 blue 2x2 plates.
44 @ .02 dfin
3 blue 2x3 plates.
3 @ .02 dfin
37 blue 2x4 plates.
37 @ .03 dfin
6 blue 2x6 plates.
6 @ .03 dfin
6 blue 2x8 plates.
4 @ .05 mg
6 @ .04 dfin
15 blue 2x12 plates.
15 @ .15 kewi
10 @ .10 keel
4 @ .04 dfin
2 blue 4x6 plates.
2 @ .05 mg
2 @ .04 dfin
2 blue 4x8 plates.
2 @ .07 mg
1 blue 6x10 plate.
1 @ .50 mg
2 blue 3x3 w/ corner removed plates - 1x3+1x2+1x1.
2 @ .03 dfin
6 blue nose plates 1x6+1x4+1x2.
2 blue nose/broad wing plates - 2x6+3x4+2x2.
2 blue wing plates - 4x4+2x5.
1 @ .10 jam
10 blue 2x2 L plates w/ 1x1 corner missing.
8 @ .06 mg
10 @ .04 paus
4 black 1x1 plates.
3 @ .08 mg
4 @ .05 toms
214 black 1x2 plates.
50 @ .06 mg
214 @ .04 john
40 black 1x3 plates.
10 @ .10 mg
40 @ .09 keel
90 black 1x4 plates.
30 @ .07 mg
90 @ .05 john
7 black 1x6 plates.
5 @ .05 mg
2 @ .03 dfin
30 black 1x8 plates.
8 @ .12 mg
20 @ .10 toms
10 @ .10 mako
30 @ .06 john
31 black 1x10 plates.
16 @ .25 keel
10 @ .24 mg
15 @ .22 db
45 black 2x2 plates.
45 @ .05 db
40 @ .02 mg
13 black 2x2 plates w/ wingtabs.
12 @ .02 dist
8 @ .01 dfin
20 black 2x2 round plates.
4 @ .10 clc5
10 @ .05 mg
20 @ .03 mako
31 black 2x3 plates.
15 @ .04 mmag
30 @ .03 mg
65 black 2x4 plates.
50 @ .07 toms
65 @ .06 paus
50 @ .05 mg
24 black 2x6 plates.
24 @ .06 toms
20 @ .05 mg
20 black 2x8 plates.
20 @ .12 paus
10 @ .11 mako
6 black 2x12 plates.
3 @ .22 mmag
6 @ .21 keel
6 @ .20 toms
5 black 2x16 plates.
5 @ .30 toms
5 @ .25 keel
9 black 4x4 plates.
9 @ .05 paus
8 @ .04 dfin
9 @ .02 paus
15 black 4x6 plates.
8 @ .09 mako
15 @ .08 paus
6 black 4x8 plates.
3 @ .32 mmag
5 @ .30 mg
6 @ .26 john
3 black 4x12 plates.
3 @ .35 mg
3 @ .10 mako
8 black 6x6 plates.
6 @ .35 mg
2 @ .30 mmag
8 @ .10 mako
4 black 6x10 plates.
2 @ .80 mg
4 @ .75 dfin
3 black 6x12 plates.
2 @ .85 mg
2 @ .75 dfin
5 black 6x16 plates.
5 @1.15 mg
5 @1.10 keel
5 @1.05 toms
10 black 3x3 plates w/ corner missing - 1x3+1x2+1x1.
8 @ .04 dist
8 @ .03 dfin
4 black nose/wing plates w/ missing notch - 2x3+1x2+1x1.
4 @ .01 dist
9 black nose plates - 1x6+1x4+1x2.
9 @ .01 dist
1 black broad nose plate - 2x6+3x4+2x2.
12 pairs of black 4x8 wings w/ notch out of end base. These
are each a pair (one left and one right) of 3x4+2x2+1x2 plates.
2 @ .25 jam
12 @ .10 dist
6 @ .04 mako
12 @ .01 joko
10 black space ship chassis plates - 14 long by 16 wide with 8 ‘+’
shaped holes along the front.
8 @ .25 mako
2 black 6x6 octagonal plates w/ large ‘+’ shaped hole in the
middle.
2 @ .02 paus
4 black 10x10 octagonal plates with large plus shaped vacancy
in the middle.
4 @ .02 paus
15 black 2x2 L plates w/ 1x1 corner missing.
10 @ .07 mg
5 @ .03 mako
9 white 1x1 plates.
5 @ .14 mg
5 @ .13 jbat
70 white 1x2 plates.
30 @ .06 mg
30 @ .05 jbat
20 @ .05 jays
10 white 1x3 plates.
10 @ .08 keel
5 @ .07 mg
34 white 1x4 plates.
15 @ .12 mg
34 @ .10 jbat
41 white 1x10 plates.
10 @ .13 jbat
31 @ .13 keel
5 white 2x2 plates.
5 @ .03 dfin
35 white 2x3 plates.
20 @ .04 kewi
35 @ .03 dfin
13 white 2x4 plates.
13 @ .05 kewi
13 @ .04 dfin
10 white 2x6 plates.
10 @ .05 dfin
11 white 2x8 plates.
11 @ .10 jbat
3 white 2x10 plates.
3 @ .18 mmag
3 @ .15 kewi
3 @ .10 jbat
2 white short nose plates - 1x6+1x4+1x2.
2 @ .03 dfin
9 trans orange 1x1 round plates.
9 @ .01 paus
121 trans fl green 1x1 round plates.
121 @ .01 paus
10 trans red 1x1 plates.
10 @ .06 mg
10 @ .05 db
10 trans dk green 1x1 plates.
10 @ .06 mg
10 @ .05 db
60 trans yellow 1x1 plates.
50 @ .06 mg
20 @ .05 keel
40 @ .05 db
5 blue 2x2 plates w/ lt grey turntables.
2 @ .20 jam
4 @ .02 dfin
5 @ .01 paus
11 black 2x2 plates w/ lt grey turntables.
11 @ .10 dist
11 @ .07 mako
11 @ .05 john
11 @ .01 joko
2 white 2x2 plates w/ lt grey turntables.
2 @ .20 jam
2 @ .03 dfin
2 yellow 2x2 plates w/ lt grey turntables.
2 @ .50 clc5
2 @ .25 mako
Slopes and Curves:
3 red 1x2 45 deg slopes.
3 @ .03 mg
25 blue 1x2 45 deg slopes.
20 @ .03 mg
4 @ .02 dfin
19 yellow 1x2 45 deg slopes.
5 @ .04 mmag
15 @ .03 mg
4 @ .02 dfin
34 black 1x2 45 deg slopes.
14 @ .06 mg
34 @ .05 keel
13 yellow 1x3 30 deg slopes.
10 @ .02 dfin
13 @ .02 mako
24 blue 1x3 30 deg slopes.
10 @ .05 jam
24 @ .03 jays
20 @ .02 dfin
4 lt grey 1x3 30 deg slopes.
4 @ .03 mmag
4 @ .02 dfin
4 @ .01 joko
10 dk grey 1x3 30 deg slopes.
10 @ .03 dfin
10 @ .01 joko
35 black 1x3 30 deg slopes.
10 @ .04 mako
20 @ .04 dist
35 @ .03 jays
3 red 1x3 30 deg slopes.
3 @ .02 mmag
3 @ .01 dfin
13 white 2x2 45 deg slopes w/ radar screen printed on slope.
5 @ .10 jam
22 white 2x2 45 deg slopes.
9 @ .11 mg
22 @ .10 robf
22 @ .07 kewi
12 yellow 2x2 45 deg slopes.
10 @ .08 mg
12 @ .06 robf
6 yellow 2x2 45 deg slopes w/ submarine readout screen printed.
6 @ .01 kewi
10 yellow 2x2 45 deg slopes w/ blue and black screen and
instruments printed.
10 @ .01 kewi
10 lt grey 2x2 45 deg slopes.
8 @ .12 mg
10 @ .10 robf
10 @ .06 kewi
60 blue 2x2 45 deg slopes.
40 @ .15 mg
60 @ .10 kewi
9 blue 3x2 45 deg slopes.
9 @ .20 mg
9 @ .15 kewi
3 black 2x3 30 deg slopes.
3 @ .04 dist
3 @ .03 dfin
4 lt grey 2x3 30 deg slopes.
4 @ .05 kewi
4 @ .03 dfin
13 dk grey 2x3 30 deg slopes w/ blue and black cross hairs printed.
10 @ .02 dfin
30 blue 2x3 30 deg slopes.
25 @ .04 dhar
30 @ .02 dfin
2 yellow 1x2x3 extreme slopes.
2 @ .08 mg
2 @ .04 mako
2 @ .03 dfin
19 lt grey 1x2x3 extreme slopes.
12 @ .06 mg
16 @ .03 dfin
22 black 1x2x3 extreme slopes.
10 @ .07 mg
22 @ .04 paus
20 @ .03 dfin
4 red 1x2 inverse 45 deg slopes.
4 @ .05 db
4 @ .02 mg
10 dk grey 1x2 inverse 45 deg slopes.
8 @ .07 mg
10 @ .05 db
15 yellow 1x2 inverse 45 deg slopes.
6 @ .06 mmag
12 @ .05 mg
2 @ .03 dfin
13 black 1x2 inverse 45 deg slopes.
10 @ .06 mako
12 @ .05 mg
11 blue 1x2 inverse 45 deg slopes.
11 @ .15 mg
8 red 1x3 inverse 30 deg slopes.
8 @ .03 mako
8 @ .02 dfin
10 black 1x2 inverse 30 deg slopes.
10 @ .03 mako
8 @ .02 dfin
16 yellow 2x2 inverse 45 deg slopes.
15 @ .05 mg
22 lt grey 2x2 inverse 45 deg slopes.
20 @ .05 mg
22 @ .01 joko
35 black 2x2 inverse 45 deg slopes.
30 @ .05 mg
4 @ .03 dfin
70 dk grey 2x2 inverse 45 deg slopes.
60 @ .05 mg
70 @ .01 joko
3 black 2x3 inverse 30 deg slopes.
3 @ .03 dfin
10 red 2x3 inverse 30 deg slopes.
2 @ .02 dfin
6 @ .01 mmag
20 dk grey 2x3 inverse 30 deg slopes.
20 @ .03 dfin
20 @ .01 joko
16 black 1x2x3 inverse extreme slopes.
8 @ .04 mg
16 @ .02 dfin
16 @ .02 jays
1 lot of printed black 45 deg slopes including one 2x2 with oval
and chevron decoration, 2 2x2 Roboforce gold and red w/
electrified circle, 2 2x2 aquazone red, blue, and yellow level
readout, and 3 1x2 with red squares and yellow circles.
1 @ .20 dist
1 @ .15 paus
5 black 4x11 large vehicle underside composite slopes.
5 @ .30 dist
5 @ .25 mako
5 @ .01 joko
22 black 4x4 inverse composite slopes.
10 @ .03 mako
22 @ .02 paus
12 black 4x6 inverse composite slopes.
6 @ .06 mako
10 @ .04 mg
8 black 4x6 composite slopes.
4 @ .02 dfin
8 @ .02 mako
8 black 4x4 composite slopes.
4 @ .02 dfin
3 black 4x4 composite slopes w/ gold and red ‘circuitry’ printed.
21 black 2x4 inverse double slope hull pieces.
21 @ .04 mako
5 blue 2x4 inverse double slope hull pieces.
5 @ .01 mg
10 black 4x4 inverse double slope hull pieces.
6 @ .12 mako
4 @ .11 mg
10 @ .10 keel
20 white 2x10 double slopes, two high with a 2x6 top.
4 @ .05 dfin
16 @ .01 dfin
4 lt grey 3x3x2 composite 1/4 dome slopes w/ one stud on top.
4 @ .10 mmag
4 @ .07 dfin
6 yellow 3x3x2 composite 1/4 dome slopes w/ one stud on top.
6 @ .10 john
6 @ .05 dfin
1 lot of 1/4 dome slopes including: 3 lt grey undersides, one
tall white, and one black.
1 @ .60 john
1 @ .10 dfin
6 black 3x4 rectangular 3-face composite slopes w/ 1x2 studs on
top.
6 @ .15 mako
6 @ .10 keel
4 green 2x4 3-curved tree-top bricks
4 @ .03 db
4 green 2x8x4 multi-curved tree bricks w/ 2x4 studs on top and
pears printed on one face.
1 @ .05 keel
4 black 1x1 w/ curved top and a 1x1 plate extended from the side.
4 @ .15 kewi
4 @ .10 joko
16 yellow 2x3 bricks w/ a curved top edge and 2x2 studs on top.
16 @ .04 kewi
16 @ .01 dfin
11 red 2x3 bricks w/ a curved top edge and 2x2 studs on top.
10 @ .01 dfin
14 green 2x3 bricks w/ a curved top edge and 2x2 studs on top.
14 @ .03 db
14 @ .01 dfin
4 blue 2x4x2 w/ two curved top edges and 2x2 studs on top.
4 @ .01 dfin
4 red 2x4x2 w/ two curved top edges and 2x2 studs on top.
4 @ .01 dfin
4 red 2x4x2 w/ two curved top edges and 2x2 studs on top w/ kids
face printed on one face.
4 black 2x4x2 w/ two curved top edges and 2x2 studs on top w/
woman's face printed on one face.
4 @ .01 toms
Wheel and Axle Related Elements:
13 yellow 2x2 tile w/ vert clip joint axle on top.
10 dk grey 2x2 tile w/ vert clip joint axle on top.
10 @ .10 toms
4 blue 2x2 tile w/ vert clip joint axle on bottom.
4 @ .01 mmag
4 @ .01 kewi
5 black 2x2 plate w/ small axles on opposite sides.
4 @ .05 mg
72 black 2x2 plates w/ small axles on opposite sides and decorative
angled struts edging out toward the axles.
20 @ .01 kewi
72 @ .01 keel
10 black 2x2 bi-level plates - 1x2x.33 + 1x2x.66 - w/ single small
axle protruding from the double thick edge.
10 @ .10 paus
5 white 1x2 bricks w/ single clip-joint axle on side.
4 @ .02 dfin
4 yellow 1x2 bricks w/ single clip-joint axle on side.
4 @ .03 mako
5 lt grey 1x2 bricks w/ single clip-joint axle on side.
4 @ .02 dfin
5 blue 1x2 bricks w/ single clip-joint axle on side.
5 @ .01 paus
27 red 1x2 bricks w/ single clip-joint axle on side.
14 @ .06 mako
27 @ .05 paus
4 red 2x2 bricks w/ single clip-joint axle on one side.
9 yellow 2x2 bricks w/ single clip-joint axle on side.
9 @ .03 mako
4 lt grey 2x2 bricks w/ single clip-joint axle on side.
4 @ .02 dfin
36 blue 2x2 bricks w/ single clip-joint axle on side.
36 @ .10 paus
10 dk grey 2x2 bricks w/ single clip-joint axle on side.
10 @ .10 paus
6 dk grey 2x2 bricks w/ two clip-joint axles on opposite sides.
2 lt grey 2x4 bricks w/ two clip-joint axle on opposite sides.
8 red 2x4 bricks w/ two clip-joint axle on opposite sides.
8 @ .01 mako
27 dk grey 2x4 bricks w/ two clip-joint axle on opposite sides.
20 @ .05 mako
7 @ .01 mako
11 lt grey 3-blade propellors with center hole for small axles.
4 @ .01 dfin
1 lot of four propellors including one yellow aquazone screw,
two long black 2-blade propellors, and one long lt grey 2-
blade propellors.
4 yellow freestyle 2-blade propellors.
2 @ .02 loho
12 black 5x5 freestyle 4-blade propellors, each blade with 1x2
studs.
12 @ .01 kewi
3 black Aquazone style 3-blade screws.
7 trans fl green Aquazone style 3-blade screws.
22 trans orange Aquazone style 3-blade screws.
18 trans dk green Aquazone style 3-blade screws.
30 lt grey 2x2 plates w/ under-slung twin small black tires.
15 @ .02 toms
30 @ .01 paus
9 yellow 2x2x.66 plates w/ attached screw-cage. This unit accepts
a technic rod into the screw mounting at the center of the cage
and through the 2x2 thick plate
3 black 2x2x.66 plates w/ attached screw-cage. This unit accepts
a technic rod into the screw mounting at the center of the cage
and through the 2x2 thick plate
3 @ .02 dfin
20 blue largish hard plastic treaded tires. These are a bit larger
than four studs in diameter and about four wide. They accept a
standard clip-joint axle.
20 @ .01 keel
6 blue huge hard plastic treaded tires. These are a bit larger
than six studs in diameter and about four wide. They accept a
standard clip-joint axle.
6 @ .50 keel
16 red 2x2 wheel hubs with standard treaded black rubber tires.
16 @ .01 dfin
4 lt grey 2x2 wheel hubs with standard treaded black rubber tires.
4 @ .01 dfin
6 white 2x2 wheel hubs with standard treaded black rubber tires.
6 @ .01 dfin
2 white 2x2 wheel hubs with large treaded black rubber tires.
2 @ .02 dfin
4 lt grey 2x2 wheel hubs with large treaded black rubber tires.
4 @ .02 dfin
120 small white wheel hubs with smooth black rubber tires. These
fit the small axles.
40 @ .05 kewi
60 @ .04 mg
60 @ .03 paus
Misc. Vehicle Related Elements:
10 Black gun/handle/controller/etc. has one vert handle on bottom
and two horiz handles on front sides and studs on front, back,
and bottom with two short small studs on top.
10 @ .06 joko
10 @ .05 mako
10 @ .01 joko
20 dk grey large Insectoids legs (2x14x~5).
6 @ .40 jam
4 @ .25 keel
20 @ .07 mako
20 dk grey small Insectoids legs (1x8x~3.5).
8 @ .25 jam
20 @ .04 mako
10 dk grey 1x2 plate with smooth side-slung rocket engine.
10 @ .02 paus
10 black 1x2 plate with smooth side-slung rocket engine.
10 @ .03 mako
10 @ .02 paus
12 black 2x2 plate with ridged under-slung rocket engine.
3 @ .10 clc5
12 @ .02 paus
10 black 1x2 plate with fat smooth hollow underslung rocket engine.
8 @ .03 dist
10 @ .02 paus
5 black conic engines with 2x2 plate under and interior of 2x4
top.
3 @ .06 mako
5 @ .05 paus
5 dk grey 2-seat 5x6 adventurers-style automobile cockpit.
5 @ .75 paus
3 black 6x6 cockpit w/ front hinge.
3 @ .01 dist
5 dk grey 12x9 vehicle units used as cockpit outers or side slopes
on large vehicles. These slope from a 2x12 plate at the top down
to a 2x6 plate with two missing corner studs at the bottom.
There is a central 4x5 empty area and two circular 2x2 holes with
radial grills to each side.
5 @ .75 paus
10 dk grey slope wings w/ 2x4 plate at top and 1x2 plate at bottom.
10 @ .02 keel
10 dk grey slope wings w/ 2x4 plate at bottom and 1x2 plate at top.
10 @ .02 keel
10 @ .01 mako
40 black slope wings w/ 2x4 plate at top and 1x2 plate at bottom.
40 @ .02 mako
40 @ .02 keel
4 black airplane fins (or struts) w/ 1x4 bottom and 1x2 on top.
4 @ .10 keel
28 black 2x3 airplane fins.
8 @ .01 dfin
8 @ .01 dist
5 dk grey and trans fl green insectoids light and sound units w/ 3
buttons and flashing lights accompanying three different sounds.
2 @ .25 mako
5 @ .10 paus
1 complete Paradisa windsurfing board including 2+x10+ board,
ball-socket long rod w/ rod-sized hole 1/4 way up, cross rod for
sail support, and tri-pink sail w/ clear regions and palm tree
island printing.
1 @ .50 dhar
1 @ .01 kewi
5 blue 4x4 bi-level vehicle front bricks w/ sloping in sides and 2
1-studs on the sides and a 2x2 lower level in the middle.
5 @ .05 mg
3 black 4x4 bi-level vehicle front bricks w/ sloping in sides and
2 1-studs on the sides and a 2x2 lower level in the middle.
3 @ .05 mg
9 lt grey 4x4 bi-level vehicle front bricks w/ sloping in sides
and 2 1-studs on the sides and a 2x2 lower level in the middle.
9 @ .05 mg
30 white 2x4x.66 plates w/ wheel well curves on sides.
15 @ .07 mg
20 @ .06 kewi
25 @ .05 mg
3 2x2 working compasses w/ high-tech printing.
3 @ .05 paus
3 @ .05 jays
1 lot of 52 assorted 1x1 stick-shift antennae. There are red
bottom/black stick, and white/black, and 1 grey/grey, and
some black/black, and black/yellow.
1 @ .60 mako
11 dk grey 1x2 plates w/ 4x4 round panel at 90 deg on one side.
2 @ .10 jbat
11 @ .02 paus
4 @ .01 dfin
10 blue 1x2 plates w/ 4x4 round pannel at 90 deg on one side.
2 @ .10 jbat
10 @ .02 paus
4 @ .01 dfin
10 black 9-long spring-loadedd shock absorbers. These are really
cool. On one end, there is a circular fixture which is the right
size for a technic rod, a stud, a rod, or a clip-joint, and on the
other side is and L-shaped fixture allowing technic rods to fit in
parallell to the other end, or straight in along the axis of the
spring.
8 @ .30 keel
10 @ .25 jays
8 dk grey radiator and headlamps units from Adventurers’ cars.
6 @ .03 dhar
2 @ .02 dfin
11 grey 1x2 tile w/ town-style steering wheels.
5 @ .01 dhar
13 blue 1x2 tile w/ town-style steering wheels.
5 @ .01 dhar
9 yellow 1x2 tile w/ town-style steering wheels.
5 @ .01 dhar
5 white 1x2 tile w/ ttown-style steering wheels.
5 @ .01 dhar
9 trans orange 3-inch antennae,
9 @ .01 mako
42 trans fl green 3-inch antennae.
20 @ .02 dist
42 @ .01 mako
10 white tall wind-surfer vert poles.
10 @ .01 kewi
30 trans fl green landing pads/sensors/metal-detectors.
30 @ .01 paus
Transparent (Canopies, windows, etc.):
69 trans red 1x1 domes. These are the ones that fit on a stud and
look like a light emitting diode.
10 @ .03 kewi
25 @ .02 mako
12 @ .02 dfin
32 @ .02 paus
69 @ .01 joko
71 trans orange flames.
50 @ .01 mako
20 trans orange 2x2 radar dishes.
10 @ .02 mako
20 @ .01 paus
34 trans fl green 2x2 radar dishes.
34 @ .01 paus
4 trans lt blue 2x5x2 windshield-canopies/greenhouse-corners where
2x2 on one side slopes up to the 2-high and then 2x3 top is flat
with only the backmost 1x2 having top studs. 10 @ .90 keel
4 @ .05 keel
10 trans dk blue 2x4x1 windshields w/ trailing side plates so you
could say that its actually 4x4x1.
10 @ .04 mg
5 trans dk blue 2x4x4 half cylinders.
4 @ .50 db
5 @ .30 mako
5 @ .25 keel
1 set of trans fl green full horizontal half-dome elements. This
includes the top quarter dome piece w/ spot for 5-finger hinge,
and the bottom quarter-dome element w/ several levels of male
studs insdie.
1 @ .25 paus
3 sets of trans dk blue full horizontal half-dome elements. Each
includes the top quarter dome piece w/ spot for 5-finger hinge,
and the bottom quarter-dome element w/ several levels of male
studs insdie.
3 @ .25 paus
11 trans fl green 4x10x2 hinged canopies.
5 @ .02 mako
4 @ .01 dist
10 trans fl green 4x4x2 insectoids golfball domes.
2 @ .25 jam
2 @ .05 jbat
10 @ .02 paus
10 trans green 4x4x2 insectoids golfball domes.
2 @ .25 jam
2 @ .05 jbat
2 @ .04 dfin
10 @ .02 paus
8 @ .01 dfin
5 trans green 4x10x2 hinged canopies. These have Insectoids
printing on the sides.
5 @ .01 dist
1 trans dk blue 6x6x2 octagonal dome w/ built-in top for tilting
hinge.
1 @ .05 paus
2 trans green 6x6x2 octagonal domes w/ built-in top for tilting
hinge.
2 @ .05 paus
3 trans green 6x6x2 octagonal domes w/ built-in top for tilting
hinge and w/ aquazone circuitry and controls printing.
3 @ .05 paus
2 trans green 10x10 octagonal domes w/ built-in top for double
tilting hinge.
2 @ .05 paus
2 trans dk blue 10x10 octagonal domes w/ built-in top for double
tilting hinge.
2 @ .05 paus
2 trans green 20x20 quarter dome units. Together these make a
half of a 20x20 dome. These fit the largest corridor system and
the large doors I have for sale from the Neptune Discovery Lab.
2 @ .50 keel
6 trans dk. blue 2x4x3 3-facet access door/panel w/ built in
4-widefinger hinge.
4 @ .03 dfin
10 trans green 2x4x3 3-facet access door/panel w/ built in
4-widefinger hinge.
8 @ .03 dfin
20 trans dk blue Insectoids wings. These are the smaller of the
two sizes and are just about 8x3 plus the 3-finger bendy-arm
hinge
4 @ .25 jam
10 trans dk blue Insectoids wings. These are the larger of the two
sizes and are just about 18x4 plus the 3-finger bendy-arm hinge
4 @ .25 jam
Walls, Grills, Grates, Railings, etc.:
11 white 1x4x2 two stud fence-railing/tool-holder/flagstands.
6 @ .05 mmag
11 @ .03 kewi
2 red 1x6x1 4 stud fence-railing/tool-holder/flagstands.
2 @ .12 mmag
2 @ .10 mg
2 lt grey 1x6x1 4 stud fence-railing/tool-holder/flagstands.
2 @ .12 mmag
2 @ .10 mg
5 black 1x6x1 4 stud fence-railing/tool-holder/flagstands.
4 @ .10 mg
1 @ .02 mmag
3 white 1x6x1 4 stud fence-railing/tool-holder/flagstands.
2 @ .06 mmag
3 @ .05 mg
8 yellow 1x6x1 4 stud fence-railing/tool-holder/flagstands.
2 @ .11 mmag
8 @ .10 mg
12 lt grey trapezoidal sign/connector w/ 1x2 plate on one end and
at 90 deg, on the other end of the lattice, one female stud.
8 @ .03 dfin
12 @ .02 paus
5 black trapezoidal sign/connector w/ 1x2 plate on one end and at
90 deg, on the other end of the lattice, one female stud.
5 @ .02 paus
4 @ .01 dfin
4 lt grey 1x2 plate w/ trapezoidal strutwork leading to a ball
hitch.
4 @ .04 paus
4 @ .03 rogr
4 @ .02 paus
10 lt grey 1x2 plate w/ trapezoidal strutwork leading to a ball
hitch.
10 @ .04 paus
10 @ .03 rogr
10 @ .02 paus
3 blue 1x2x1 wall pieces.
3 @ .02 kewi
3 @ .01 dfin
3 yellow 1x2x1 wall pieces.
3 @ .05 mako
3 @ .04 kewi
3 @ .03 mako
15 white 1x2x1 wall pieces.
15 @ .06 kewi
15 @ .05 dfin
45 black 1x2x1 wall pieces.
20 @ .03 mako
45 @ .02 dfin
5 white 1x2 grill tiles.
5 @ .04 dfin
27 yellow 1x2 grill tiles.
20 @ .03 mako
6 @ .02 dfin
87 white 1x2 grill tiles.
12 @ .05 jbat
80 @ .03 dfin
151 trans fl green 1x2 grill tiles.
100 @ .02 mako
151 @ .01 paus
3 yellow 1x2 plates w/ dangling side ladders.
3 @ .02 paus
5 black 1x2x1 toolbox/railing/seatbacks.
12 yellow 1x2x1 toolbox/railing/seatbacks.
25 blue 1x2x1 toolbox/railing/seatbacks.
10 @ .01 kewi
51 white 1x2x1 toolbox/railing/seatbacks.
50 @ .02 kewi
50 @ .01 dfin
3 black 1x4x1 lattice fences.
3 @ .10 toms
3 @ .05 keel
4 yellow 1x4x1 lattice fences.
4 @ .04 dhar
4 white 1x4x1 lattice fences.
4 @ .05 keel
4 @ .05 dhar
9 red 1x4x1 lattice fences.
9 @ .05 db
4 @ .04 dhar
9 @ .01 mmag
2 white 1x2x3 wall pieces.
2 @ .05 mg
4 yellow 1x2x2 wall pieces.
4 @ .11 mg
2 @ .10 mmag
2 @ .09 mako
60 black 1x2x2 wall pieces.
15 @ .10 mmag
24 @ .10 mg
20 @ .07 mako
60 @ .06 joko
2 lt grey 4.5x4.5 square lattice surrounding a 2x2 plate at the
center.
1 @ .07 mmag
2 @ .05 keel
Hinge Elements (sometimes blurs w/ next category):
5 yellow 1x2 base for 90 deg tilting hinge.
5 @ .03 mako
15 black 1x2 base for 90 deg tilting hinge.
15 @ .04 dist
15 @ .03 mako
35 lt grey 1x2 base for 90 deg tilting hinge.
20 @ .02 mako
35 @ .01 joko
6 blue 1x2 base for 90 deg tilting hinge.
6 @ .10 jam
6 @ .02 dfin
7 blue 1x2 top for 90 deg tilting hinge.
4 @ .10 jam
6 @ .02 dfin
39 black 1x2 top for 90 deg tilting hinge.
15 @ .04 dist
15 @ .03 mako
24 @ .02 mako
39 @ .01 joko
5 red 2x2 top for 90 deg tilting hinge.
5 @ .03 mako
4 black 2x2x2 ‘mail’ boxes with trans fl green doors.
4 @ .05 mako
5 black 1x2 bricks w/ 2-finger bendy-arm hing half on side.
5 @ .05 mako
10 dk grey 1x2 bricks w/ 2-finger bendy-arm hing half on side.
6 black 2-3 finger bendy-arm hinge units.
6 @ .05 mako
18 yellow 2-3 finger bendy-arm hinge units.
18 @ .05 mako
12 trans orange 2+3 finger bendy-arm hinge units.
12 @ .03 paus
12 @ .02 mako
12 @ .01 paus
10 dk grey 2+3 finger bendy-arm hinge units.
5 @ .04 mako
10 @ .03 paus
10 @ .02 mako
3 complete yellow and black bendy-arm half hinge graber hand
units. Each unit is three pieces, the hinge interface and
two claw halves.
3 @ .02 paus
3 yellow bendy-arm clip-joint terminators.
3 @ .05 mako
20 black bendy-arm clip-joint terminators.
20 @ .05 mako
2 black 2x2-1x4 rocker hinge bricks.
2 @ .07 keel
2 @ .04 joko
2 @ .03 dfin
2 @ .01 joko
4 black 2x2-1x4 rocker hinge plates.
4 @ .06 keel
4 @ .04 joko
4 @ .03 dfin
4 @ .01 joko
4 blue 2x2 plates w/ underslung clip-joint socket.
4 @ .01 paus
6 black ~3.5-length hinge arm w/ 3-fingers on one side and two at
90 deg angle on the opposite.
6 @ .01 paus
12 black ~2.5-length hinge arm w/ 3-fingers on one side and a stud
on the other.
12 @ .01 paus
3 black 1x6 plates w/ 3-finger on one end and 2-finger on the
other.
3 @ .15 mako
3 @ .10 keel
4 white 1x2 plates w/ 3-finger on one end.
4 @ .06 kewi
4 @ .05 jam
4 @ .03 dfin
9 black 1x2 plates w/ 3-finger on one end.
8 @ .06 dist
9 @ .05 mako
4 blue 1x2 plates w/ 3-finger on one end.
4 @ .10 jam
4 @ .01 dfin
20 red 1x2 plates w/ 3-finger on one end.
10 @ .06 kewi
20 @ .05 mako
4 white 1x2 plates w/ 2-finger on one end.
4 @ .10 jam
4 @ .04 dfin
20 black 1x2 plates w/ 2-finger on one end.
8 @ .02 dist
20 @ .01 paus
15 lt grey 1x2 plates w/ 2-finger on one end.
15 @ .03 paus
10 @ .02 kewi
15 @ .01 paus
2 white 1x2.5 tile w/ 2-finger on top of end.
2 @ .10 jam
2 @ .01 paus
4 lt grey 1x2.5 tile w/ 2-finger on top of end.
4 @ .03 paus
4 @ .02 kewi
10 black 1x2.5 tile w/ 2-finger on top of end.
10 @ .05 paus
10 @ .04 mako
10 @ .03 paus
8 lt grey 1x4 tile w/ 5-finger on top of side.
4 @ .09 mg
8 @ .08 paus
48 black 1x4 tile w/ 5-finger on top of side.
10 @ .06 mako
20 @ .06 paus
40 @ .05 mg
10 blue 1x4 plates w/ 5-finger on side.
4 @ .08 mmag
10 @ .07 paus
10 @ .05 paus
4 @ .03 dfin
22 black 1x4 plates w/ 5-finger on side.
10 @ .06 mako
12 @ .06 paus
12 @ .05 mg
10 @ .05 paus
17 black 2x4 plate w/ extension and 4-wide finger on side.
17 @ .03 paus
9 @ .02 mako
2 yellow 2x4 plate w/ two 45 deg slopes down so total size is 4x4
and there are 4-wide fingers on one side at bottom of slope.
2 @ .02 mako
2 @ .01 paus
20 yellow 2x4 plate w/ two 45 deg slopes down so total size is 4x4
and there are 4-wide fingers on one side at bottom of slope.
12 @ .03 mako
20 @ .01 paus
5 black 1x4 w/ 5-finger hinge on side and ~2.5x4 corrugated door
flap.
4 @ .10 mg
5 @ .05 paus
Connective Elements (sometimes blurs w/ last category):
4 pink tap/lamp sconce elements.
4 @ .03 dhar
4 @ .01 kewi
4 @ .01 db
2 black clip-on reflector shields.
2 @ .01 kewi
2 white 1x2 bricks w. a horizontal grip claw on one face.
2 @ .02 dfin
6 yellow 2-grip claw non-flexible flags.
1 @ .11 dist
6 @ .10 dfin
6 @ .02 jays
33 blue 2-grip claw ninja decorated non-flexible flags.
11 lt grey 2x2 plates w/ semicircle extension w/ hitch hole.
11 @ .01 joko
14 black 1x2 plates w/ vert rod hitch extending out and up.
10 @ .01 mako
11 yellow 1x2 plates w/ vert rod hitch extending out and up.
11 @ .01 mako
8 black 1x1 bricks w/ vert 1-high rod on one side.
4 @ .06 mmag
8 @ .05 keel
20 red 1x1 bricks w/ vert 1-high rod on one side.
10 @ .05 mmag
10 @ .03 kewi
20 @ .03 keel
4 black ‘robot arms’ w/ 1 stud on one side of rod and a gripy claw
on the other.
4 @ .05 clc5
4 @ .01 dfin
30 black 1x2 plates w/ 2-long side bars next to each end, parallel
to the short end of the plate and extending away from the plate
in one direction.
15 @ .02 mako
20 @ .01 dfin
10 @ .01 dist
11 blue 1x2 plates w/ 2-long side bars next to each end, parallel
to the short end of the plate and extending away from the plate
in one direction.
8 @ .03 mako
10 @ .01 dfin
4 black flash light/gun thingies w/ large cylinder accepting a
stud on one end and continuing in a 2-long rod that a 1-long
rod comes out of at 90 deg.
4 @ .05 clc5
4 @ .02 mako
4 @ .01 kewi
20 dk grey flash light/gun thingies w/ large cylinder accepting a
stud on one end and continuing in a 2-long rod that a 1-long rod
comes out of at 90 deg.
4 @ .05 clc5
10 @ .03 mako
20 @ .02 kewi
15 @ .02 mako
20 @ .01 joko
4 yellow 1x1 plates w/ parallel side hoop on one side.
4 @ .01 kewi
4 lt grey 1x1 plates w/ parallel side hoop on one side.
5 red 1x1 plates w/ parallel side hoop on one side.
8 blue 1x1 plates w/ parallel side hoop on one side.
16 black 1x1 plates w/ parallel side hoop on one side.
10 @ .01 dist
50 white 1x1 plates w/ parallel side hoop on one side.
10 @ .03 kewi
50 @ .02 dfin
4 red 1x1 tiles w/ grippy claw on top.
10 @ .01 kewi
7 black 1x1 tiles w/ grippy claw on top.
7 @ .05 jays
7 @ .01 keel
10 lt grey 1x1 tiles w/ grippy claw on top.
22 white 1x1 tiles w/ grippy claw on top.
22 @ .02 jays
29 blue 1x1 tiles w/ grippy claw on top.
10 @ .01 kewi
21 blue 1x1 tiles w/ vertical grippy claw on one side.
72 black 1x1 tiles w/ vertical grippy claw on one side.
20 @ .01 dfin
10 @ .01 kewi
42 @ .01 dist
8 blue 1x1 tiles w/ horizontal grippy claw on one side.
10 yellow 1x1 tiles w/ horizontal grippy claw on one side.
10 @ .01 kewi
14 white 1x1 tiles w/ horizontal grippy claw on one side.
14 @ .03 kewi
10 @ .02 dfin
20 lt grey 1x1 tiles w/ horizontal grippy claw on one side.
10 @ .01 kewi
26 black 1x1 tiles w/ horizontal grippy claw on one side.
10 @ .01 kewi
16 @ .01 dist
5 white 1x2 plates w/ 3-section horizontal bar attached by two
struts along a long side.
4 @ .01 dfin
6 yellow 1x2 plates w/ 3-section horizontal bar attached by two
struts along a long side.
4 @ .03 mako
6 @ .02 kewi
4 @ .01 dfin
49 black 1x2 plates w/ 3-section horizontal bar attached by two
struts along a long side.
5 @ .02 dist
49 @ .01 mako
4 yellow 1x2 plates w/ two angled segments coming off and
supporting vertical, hollow, single, full-height studs.
4 @ .03 mako
4 @ .02 kewi
4 @ .01 dfin
21 black 1x2 plates w/ two angled segments coming off and
supporting vertical, hollow, single, full-height studs.
10 @ .02 mako
12 @ .01 dfin
25 dk grey 1x2 plates w/ two angled segments coming off and
supporting vertical, hollow, single, full-height studs.
10 @ .03 kewi
16 @ .02 dfin
1 red 2x2 plate w/ ball hitch extending to one side.
1 @ .06 paus
1 @ .05 db
1 @ .02 paus
1 blue 2x2 plate w/ ball hitch extending to one side.
1 @ .02 paus
1 @ .01 dfin
3 yellow 2x2 plates w/ ball hitch extending to one side.
3 @ .05 paus
3 @ .03 kewi
1 blue 2x2 plate w/ female coupler for ball hitch on one side.
1 @ .02 paus
1 @ .02 dfin
1 red 2x2 plate w/ female coupler for ball hitch on one side.
1 @ .06 paus
1 @ .05 db
1 @ .02 paus
2 yellow 2x2 plates w/ female coupler for ball hitch on one side.
2 @ .05 paus
2 @ .03 kewi
6 lt grey 2x2 plates w/ female coupler for ball hitch on one side.
6 @ .02 paus
4 @ .01 dfin
11 black 2x2 plates w/ female coupler for ball hitch on one side.
11 @ .02 paus
4 @ .01 dfin
Magnetic Elements:
25 dk grey plates w/ under-slung magnet.
10 @ .03 mg
25 @ .02 mako
7 black plates w/ top magnet.
5 @ .03 mg
7 @ .02 mako
1 black plate w/ top socket for magnet, but no magnet.
1 @ .01 robf
4 lt grey magnet armatures w/ hole for a clip joint and a magnet
on a swivel.
2 @ .03 mg
4 @ .02 mako
4 black magnet armatures w/ hole for a clip joint and a magnet
on a swivel.
2 @ .03 mg
4 @ .02 mako
Minifigs Elements:
1 mixed lot of minifig wear including: 2 blue witch’s hats, 1
green witch’s hat, 1 trans fl green diver/space headgear/mask w/
no visor, 1 same in dk grey, 1 standard white helmet w/ trans
orange large visor w/ antenna, 1 black top hat, 1 plain yellow
helmet, 1 blue helmet w/ stars and stripes, 1 black police
style(?) hat, 1 red baseball cap, 2 black neckwear bandannas, 4
yellow epulets, 5 black pilot’s eyeglass-style visors.
1 @ .25 mako
1 @ .10 db
1 @ .01 kewi
1 mixed lot of minifig accessories including: 4 trans fl orange
chainsaw blades and one in lt grey, one complete dk grey sprue
wheel of hand tools and another set sans sprue wheel (courtesy
my son), 2 dk grey jackhammers, 2 brown suitcases, 4 gold
bugles, and 2 trans red wands.
1 @ .10 dist
1 mixed lot of minifig weapons including: 3 black and 2 lt grey
hatchets, 1 dk grey lance, 1 lt grey ninja sword, two silver
great swords, and 4 large Fright Knight shields.
1 @ .25 mako
4 pink coffee mugs.
4 @ .11 keel
4 @ .10 dhar
5 black frying pans.
4 @ .10 dhar
1 @ .01 loho
13 black walkie-talkie radios.
13 @ .05 clc5
13 @ .01 joko
2 blue bullhorns. (I could have put these under vehicles too.)
2 @ .10 toms
22 lt grey bullhorns. (I could have put these under vehicles too.)
15 @ .02 mako
22 @ .01 joko
42 black bullhorns. (I could have put these under vehicles too.)
42 @ .03 dist
25 @ .02 mako
42 @ .01 joko
5 black double scuba tanks.
2 @ .03 loho
5 @ .02 keel
5 black magnafying glasses w/ real lenses.
4 @ .01 dhar
22 white mirror/serving tray thingies(?) These have a handle and a
circle and the circle has a stud at center on one side.
10 @ .05 dhar
10 @ .02 kewi
12 @ .02 rogr
22 @ .01 keel
5 black movie cameras.
5 @ .13 keel
5 @ .02 dfin
69 brown spears.
10 @ .03 dhar
30 @ .03 keel
20 @ .02 dhar
69 @ .01 mako
69 @ .01 db
14 dk grey revolvers.
14 @ .01 keel
26 dk grey rifles.
26 @ .05 jbat
2 brown muskets.
2 @ .05 dhar
20 silver harpoons (all but two still on sprues).
20 @ .01 db
3 black lances.
3 @ .01 kewi
6 sets of black bow, arrow, and quiver. Each set contains a
bow’n’arrow piece as well as a quiver for the back.
6 @ .05 mako
4 @ .03 dhar
5 trans dk green underwater gun thingies w/ black rubber suction
cup.
5 @ .04 paus
5 @ .02 toms
5 @ .01 paus
5 black large space shoulder armor things.
5 @ .06 dist
5 @ .05 toms
11 dk grey motorcycle-style helmets.
10 @ .05 mako
15 clear motorcycle-style helmets.
10 @ .05 mako
4 trans dk green insectoids helmets.
4 @ .10 jbat
5 trans fl green insectoids helmets.
5 @ .10 jbat
5 dk grey ‘mean’ iron helmets. (Maybe from stingrays?)
5 @ .10 jbat
4 white deep-diver’s helmet suits w/ black face-mask visors.
6 silver-blue deep-diver’s helmet suits w/ trans fl green
face-mask visors.
1 lot of 7 diver helmet face-masks including: 1 black, 1 trans dk.
blue, and 5 trans fl green.
4 pairs of lt grey swim fins for minifig feet. (Since these are
the least common, they are obviously the fastest - don’t let
your minifigs get caught in shark-infested water without these
babies.)
4 @ .01 db
6 pairs of blue swim fins. (These are your basic tourist work
fins - great for any town or beach swimmers as well as rescue
divers.
12 pairs of black swim fins. (For any night operations where
delicacy is called for. If you are outfitting a SeAL team, this
is the deal of a century!)
2 @ .02 loho
22 opaque black helmet visors.
10 @ .05 jbat
12 @ .02 mako
10 trans dk blue helmet visors.
10 @ .02 mako
3 trans fl green helmet visors.
10 @ .02 mako
3 trans lt blue helmet visors.
3 @ .03 rogr
3 @ .02 mako
5 glow-in-the-dark chost covers. These allow you to turn any
minifig into a ghost.
5 @ .25 keel
2 @ .10 jays
5 @ .02 paus
5 sets of blue legs w/ white waists.
5 @ .13 keel
4 @ .10 mg
10 sets of lt grey legs and waists.
4 @ .15 mg
10 @ .13 keel
20 sets of black legs w/ yellow waists.
5 @ .14 mg
20 @ .13 keel
1 green torso w/ white sleeves and classic smiley head.
1 @ .10 keel
1 @ .05 clc5
1 @ .01 rogr
1 green vested torso w/ white sleeves and smiling sunglasses head.
1 @ .10 keel
1 @ .01 rogr
5 diver’s torsos w/ blue, white, and black gear, black sleeves,
and white hands. Each has a semi-random head.
5 @ .10 keel
5 @ .01 rogr
10 black extreme team torsos w/ white sleeves and black hands, and
w/ a long blue sunglasses head.
10 @ .10 mako
10 @ .10 keel
8 black extreme team torsos w/ red sleeves and black hands, and w/
a big sunglasses smiley head.
8 @ .10 mako
8 @ .10 keel
10 ‘jiffy-lube’ worker torsos w/ grey long-sleeved shirt w/ dial
insignia and black gloves, and w/ small mustached smile head.
1 @ .35 clc5
2 @ .30 kewi
8 @ .21 rogr
2 complete ghosts w/ glow-in-the-dark cover, white legs, white
torso, and black head.
2 @ .60 keel
2 @ .50 jays
2 @ .50 toms
2 @ .01 joko
2 complete skeletons.
2 @ .70 keel
2 @ .50 dfin
2 @ .25
2 @ .15 jays
2 complete female adventurers w/ red legs and waists, desert
shirts, lipstick and brown hair, and white pith helmets.
2 @1.00 dhar
2 @ .50 db
1 @ .30 mg
2 @ .25 jays
2 motorcycle gangsters w/ dk grey legs and waist, black multi-
zippered jacket, bushy frowny face, and black police style cap.
2 @ .35 keel
2 @ .25 db
8 knights w. dk grey legs and waists, grey and silver breastplate
over black shirt, head w/ little mustache, and black police
style cap.
8 @ .25 keel
4 complete black-legged, dk grey and green alien android minifigs.
4 @ .50 jbat
4 complete black, lt grey and blue alien android minifigs.
2 @ .56 jbat
4 @ .55 mako
13 compete black, grey, silver, and gold alien android minfigs.
13 @ .10 keel
13 @ .05 mako
13 @ .01 dist
Animal Elements:
3 big black octopi w. 2x2 bases.
3 @ .20 keel
1 black sting/manta ray.
1 @ .10 loho
1 dk grey shark w/ normal head.
1 @ .25 keel
5 red snakes.
5 @ .01 kewi
17 black snakes.
17 @ .01 kewi
2 full brown monkeys w/ yellow hands.
2 @ .50 jays
2 @ .20 mg
11 black bats.
11 @ .01 kewi
4 red w/ yellow and green wings parrots.
3 @ .25 dhar
1 @ .06 loho
4 @ .05 db
36 dk grey birds.
18 @ .01 mg
25 @ .01 dhar
Tiles:
40 black 1x1 tiles.
20 @ .12 mg
40 @ .12 joko
3 yellow 1x1 tiles w/ four squuare buttons printed in black and
red.
3 @ .10 toms
8 black 1x2 tiles.
2 @ .35 clc5
8 @ .20 db
20 blue 1x2 tiles.
20 @ .06 keel
20 @ .06 paus
16 @ .05 dfin
30 black 1x2 tiles w/ fat arrow pointing to long end printed in
yellow.
20 @ .06 mako
8 @ .05 jam
20 @ .02 dfin
10 black 1x2 tiles w/ long arrow pointing to short end printed in
yellow.
5 @ .05 mg
10 @ .03 mako
12 yellow 1x2 tiles w/ long arrow pointing to short end printed in
black.
5 @ .05 mg
12 @ .03 mako
10 @ .02 dfin
5 yellow 1x2 tiles w/ crosshairs on surface of water printing.
5 @ .02 mako
4 dk grey 1x2 tiles w/ buttons wired to a display printed in
gold, red, grey and black.
2 @ .04 mako
2 @ .02 toms
20 black 1x2 tiles w/ celestial mechanics display printed in
green, silver and gold.
4 @ .02 toms
15 @ .02 mako
10 white 1x2 tiles w/ computing controls printed in black, red, and
yellow.
6 @ .06 kewi
4 @ .06 mg
5 @ .05 jam
18 yellow 1x2 tiles w/ electronics and bubbling water compartments/
windows printed in black, silver, white, and blue.
1 lot of 5 1x2 tiles: two lt grey dynamites and 3 black roboforce
emblems.
4 lt grey 1x4 tiles.
4 @ .25 sull
4 @ .10 toms
10 blue 1x4 tiles.
10 @ .08 keel
8 @ .06 john
20 white 1x4 tiles.
20 @ .12 kewi
20 @ .12 robf
20 @ .11 keel
20 black 1x4 tiles.
10 @ .13 mg
20 @ .12 kewi
20 @ .12 robf
20 red 1x6 tiles.
6 @ .10 mmag
10 @ .09 mg
20 @ .08 dfin
10 black 1x6 tiles.
10 @ .22 kewi
10 @ .22 robf
2 yellow 2x2 tiles.
2 @ .06 mako
2 @ .05 dfin
10 blue 2x2 tiles.
4 @ .08 mg
10 @ .07 keel
10 white 2x2 tiles.
4 @ .21 mg
10 @ .20 db
11 black 2x2 tiles.
11 @ .20 db
11 @ .11 keel
2 white 2x2 tiles w/ arrow printed in black and yellow.
2 @ .05 dfin
7 black 2x2 tiles w/ metalic orange and silver concentric dashed
circles.
5 @ .11 dist
7 @ .10 db
7 @ .04 dfin
7 @ .01 toms
19 black 2x2 tiles w/ insectoids weapons readout or decorative
triangle w/ twin crosshairs printed in orange and silver.
19 @ .02 mako
19 @ .01
3 black 2x2 tiles w/ arrow printed in yellow.
3 @ .04 mako
3 @ .03 dfin
3 @ .01 toms
10 white 2x2 tiles w/ four dial guages and a red light/button
printed in black, red, and yellow.
4 @ .15 mg
4 @ .13 kewi
4 @ .13 mako
5 black 2x2 tiles w/ red hoses/wires surrounding a blue display w/
silver crosshairs and a dot.
5 @ .01 toms
1 lot of three white 2x2 tiles w/ one each: paradisa ice-cream
cone, Voltron looking symbol on a silver and blue cirlce, and a
nautical symbol w/ a life preserver on a blue shield between sets
of red bars.
1 @ .20 db
1 @ .06 kewi
1 @ .05 toms
3 yellow 2x2 round tiles w/ submarine in crosshairs printed in
blue and black.
5 lt grey 2x2 round convex under-tiles, w/ the 2x2 studs on top.
5 @ .02 paus
5 @ .01 dfin
6 black 2x2 round convex under-tiles, w/ the 2x2 studs on top.
6 @ .02 paus
6 @ .01 dfin
Flexible:
2 black strings w/ 1x1 round plates on the ends.
2 @ .25 db
2 @ .11 joko
1 short black string w/ 1x1 round plates on the ends.
1 @ .11 joko
1 @ .10 jays
10 green strings (roughly five inches long) w/ gun/hose nozzle
on end.
8 @ .08 mg
3 @ .08 mmag
10 @ .07 rogr
3 black strings (roughly five inches long) w/ lt grey gun/hose
nozzle on end.
2 @ .21 mg
3 @ .20 kewi
10 black flexible ridged hoses w/ 1-stud female coupler on
each end.
3 @ .15 clc5
10 @ .10 dist
3 lt grey flexible ridged hoses w/ 1-stud female coupler on
each end.
3 @ .06 john
3 @ .05 keel
5 lt grey lengths of pneumatic hose - roughly seven inches.
5 @ .06 john
5 @ .05 keel
Technic:
62 lt grey clip joint on one end and stud on the other.
30 @ .04 mako
62 @ .03 kewi
10 dk grey clip joint on one end and small clip joint on the other.
10 @ .01 mako
10 @ .01 keel
2 lt grey bi-width spacer pulley w/ transparent inner ring.
2 @ .03 paus
16 lt grey double clip joint.
16 @ .02 jays
16 @ .01 dfin
50 lt grey clip joint on one end and technic rod on the other.
10 @ .05 jam
12 @ .01 dfin
20 @ .01 mako
11 lt grey wide spacers.
3 lt grey wide spacer / rod joiner.
3 @ .01 mako
6 (part 2854) with technic rod holes on opposite sides separated
sideways and vertical.
4 @ .01 dfin
15 lt grey spacers w/ one ridged edge.
6 black thin sideways bricks w/ five holes and no studs.
6 @ .02 dfin
6 @ .01 toms
6 blue technic rubber pulley-bands.
6 dk grey 3-length technic rods w/ a stud on one side.
6 @ .02 dfin
4 lt grey egg-shaped cam-lifters w/ four spaces for technic rods.
4 @ .01 toms
30 brown technic flywheels and 24 rubber tires that fit them (tires
go to the 24 most expensive if not all purchased together).
30 @ .05 keel
2 blue 2x4 technic plates.
2 @ .02 dfin
4 black 2x6 technic plates.
4 @ .05 keel
4 @ .02 dfin
4 @ .01 john
4 @ .01 toms
4 lt grey 2x8 technic plates.
4 @ .12 keel
4 @ .11 john
2 black 2-length technic rods.
34 black 2-length technic rods w/ two ridges incised.
12 @ .01 dfin
10 @ .01 mako
3 black 3-length technic rods.
3 @ .02 mako
3 @ .01 dfin
9 black 4-length technic rods.
9 @ .04 mako
9 @ .02 keel
8 @ .01 dfin
8 black 6-length technic rods.
4 @ .04 mako
8 @ .02 dfin
12 black 8-length technic rods.
4 @ .03 mako
8 @ .02 dfin
4 @ .02 keel
6 black 12-length technic rods.
6 @ .06 mako
6 @ .05 keel
9 lt grey 1x2 technic beam w/ one hole.
2 @ .05 jam
6 @ .05 sull
9 @ .01 joko
24 yellow 1x2 technic beam w/ one hole.
24 @ .04 mako
24 @ .03 jays
24 @ .02 dfin
10 black 1x2 technic beam w/ one hole.
10 @ .03 jays
10 @ .02 dfin
25 dk grey 1x2 technic beam w/ one hole.
25 @ .02 keel
25 @ .01 joko
5 blue 1x4 technic beams.
5 @ .02 paus
8 black 1x4 technic beams.
4 @ .05 mako
8 @ .04 paus
9 black 1x8 technic beams.
9 @ .07 paus
9 @ .06 mako
9 @ .05 paus
9 @ .04 mako
2 black 1x10 technic beams.
2 @ .17 paus
2 @ .15 mako
2 @ .12 keel
2 @ .10 jays
2 @ .04 paus
8 black 1x12 technic beams.
8 @ .22 paus
8 @ .20 mako
8 @ .18 keel
8 @ .15 jays
8 @ .11 toms
10 black 1x2 technic beams w/ a stubby double slope (top and
bottom) to one side.
10 @ .03 dfin
5 black 1x2 technic beams w/ a long slopping downward segment to
one side.
5 @ .03 dfin
10 black cylinders w/ central segment allowing insertion of a
technic beam surrounded by six holes. The whole piece is
roughly 4 studs in diameter and almost three studs wide/tall.
10 @ .06 kewi
10 @ .05 keel
Aquazone Piping:
1 green octagonal piping segment w/ 2x4 studs on one side.
1 @ .05 mg
2 black octagonal piping segment w/ 2x4 studs on one side.
2 @ .08 mg
2 @ .06 mako
39 yellow octagonal piping segment w/ 2x4 studs on one side.
25 @ .06 mako
30 @ .05 mg
5 green octagonal 1/2 segments w/ slantwise shift to the side.
4 @ .15 mg
5 @ .13 paus
36 yellow octagonal 1/2 segments w/ slantwise shift to the side.
10 @ .12 mg
16 @ .11 mako
20 @ .10 paus
8 black octagonal piping cones.
8 @ .12 keel
8 @ .10 paus
12 yellow octagonal piping cones.
12 @ .10 paus
2 green octagonal piping segments w/ a 90 deg turn.
2 @ .12 mg
2 @ .10 paus
17 yellow octagonal piping segments w/ a 90 deg turn.
10 @ .15 mg
17 @ .14 mako
Miscellaneous Other:
13 black 2x4x2+ bricks w/ 2x4 ‘bottoms’ on the two sides.
13 @ .18 paus
4 @ .17 dist
8 @ .16 mako
2 yellow 2x4x2+ bricks w/ 2x4 ‘bottoms’ on the two sides.
2 @ .20 paus
2 @ .20 dist
2 @ .18 mako
2 black 2x4x2+ bricks w/ 2x4 ‘tops’ on the two sides.
2 @ .20 paus
2 @ .20 dist
2 @ .18 mako
1 lot of stickers including: 8 3”x5” sheets of XtremeTeam Air
Show stickers, one 1”x2” sheet of aquazone stickers w/ two
599 oval stickers, and 25 little round magnetic stickers.
1 @ .01 kewi
2 gold mummy LEGO cases w/ screw bottoms. These are roughly 16”
long and 4” in diameter.
2 @ .50 paus
2 child-sized insectoids face masks.
2 @ .10 dist
10 black roughly 4x4 umbrella top, half discs w/ one stud at
center.
2 @ .06 mmag
10 @ .05 keel
1 lot of 12 wavy pennant flags, including: 4 blue, 2 green, 4
white, 1 red, and o1 yellow.
1 @ .10 db
5 black 1x2 plates w/ control unit(?) on top that has one stud
on each side, facing outward, and a sloped (roughly 20 degrees
off flat) surface w/ one stud.
4 @ .04 dist
5 @ .02 toms
5 @ .01 dfin
5 @ .01 paus
5 blue gun thingies w/ a handle, a 1/2 inch pole barrel and a
stud sight.
5 @ .02 mako
25 trans fl green insectoids 3-point power crystals (or whatever).
10 @ .01 mako
15 @ .01 dist
11 black 2x2x2 round stilt/strut/landing pads.
11 @ .05 keel
2 blue 2x2x2 round stilt/strut/landing pads.
2 @ .01 dfin
2 grey 1x1x2 seven-stud ‘traffic light’ pieces.
2 @ .05 mg
2 @ .03 kewi
2 @ .02 dfin
2 black 1x1x2 seven-stud ‘traffic light’ pieces.
2 @ .05 clc5
2 @ .02 kewi
2 @ .02 dist
2 @ .01 dfin
19 silver aquazone power crystals.
19 @ .10 keel
5 @ .03 jays
15 dk grey 90 degree plates w/ side struts. One flap has a 2x2
bottom and no top, the other has a 2x3 bottom and a 2x2 top.
15 @ .02 mako
15 @ .01 joko
10 black 1x8 plates w/ a half rail along one side.
5 @ .30 mmag
9 @ .22 mg
10 @ .20 kewi
2 black spiral staircases w/ a 2x4 bottom and about 9 bricks tall.
1 @2.05 loho
1 @2.00 db
2 @1.75 jbat
1 pink spiral staircases w/ a 2x4 bottom and about 9 bricks tall.
1 @ .75 keel
1 @ .05 paus
1 @ .01 joko
1 lot of three town doors including two red and one yellow.
1 @ .25 dhar
1 @ .01 joko
4 yellow freestyle windows, 2x4x3 with a sloping front so that the
top is a 1x4 strip.
4 @ .05 db
4 @ .01 dhar
4 2x6x6 red-frame yellow-door big freestyle doors w/ 4 windows
in each door.
4 @ .05 db
4 @ .01 dhar
5 black 4x4 plates w/ 1-high round turntable.
5 @ .30 dist
5 @ .25 keel
2 yellow octagonal 10x10 dome bottoms. This has a central 2x2
bottom and four surrounding 2x2 bottoms elevated.
2 @ .05 paus
3 black 1x2 plates w/ a 90 degree bend leading to a 1x4 plate top.
3 @ .03 mako
3 @ .01 dfin
10 white 1x2 plates w/ a 90 degree bend leading to a 1x4 plate top.
10 @ .03 dfin
5 blue 1x2 plates w/ a 90 degree bend leading to a 1x4 plate top.
5 @ .01 dfin
2 blue 4x4x2 round hollow cone bricks w/ a 2x2 round hole.
2 @ .10 db
2 black 4x8 half crenelated tower tops.
2 @ .40 keel
4 white 1x6x3 rounded half arch w/ 1x2 plate at apex.
4 @ .06 kewi
4 @ .04 dfin
4 @ .03 john
4 @ .01 joko
9 blue 1x6x2 rounded arches w/ 1x2 studs at top center.
9 @ .05 db
9 @ .03 john
1 yellow and trans blue spring-loaded crane scoop. (from Neptune
Discovery Lab)
1 @ 1.00 keel
14 silver reflector dishes w/ 1-stud hole through center.
10 @ .03 mako
12 @ .02 dfin
4 yellow 2x2 minifig chairs.
3 @ .20 dhar
4 @ .15 db
4 @ .10 john
4 @ .05 jays
3 pink 2x2 minifig chairs.
2 @ .25 dhar
2 @ .15 db
3 @ .12 kewi
3 @ .10 john
9 black 1x4 bricks w/ horizontal notch track down one side.
3 @ .50 mmag
9 @ .45 keel
9 @ .41 toms
6 yellow 1.5 inch pole/plunger/antennae.
6 @ .01 dfin
2 giant yellow-frame, trans blue doors central to the Neptune
Discovery Lab. The frame piece is 2x10x12 w/ hinge brackets
on either side for the ~11-high door w/ 1x2 studs for door
handle etc.
2 @ 1.75 paus
I have attempted to eliminate typos, but please feel free
(encouraged) to bring anything of that nature to my attention.
Sincerely,
Christopher L. Weeks
|
|
Message has 1 Reply:
 | | thousands of bargains (literally!) at my auction
|
| Christopher's LEGO parts auction V: I have taken bits and pieces from my previous auctions and the ones that I participate in as a buyer for this format. 10 Sept 99: Any listing without a bid can be bid on at any level. If no one else wants it for (...) (25 years ago, 6-Oct-99, to lugnet.market.auction)
|
Message is in Reply To:
| | Re: Auction V update - deals and steals
|
| Christopher's LEGO parts auction V: I have taken bits and pieces from my previous auctions and the ones that I participate in as a buyer for this format. 10 Sept 99: Any listing without a bid can be bid on at any level. If no one else wants it for (...) (25 years ago, 22-Sep-99, to lugnet.market.auction)
|
12 Messages in This Thread:
  
 
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
