Subject:
|
RE: HELP, please! USB tower problems
|
Newsgroups:
|
lugnet.robotics
|
Date:
|
Tue, 25 Nov 2003 14:33:00 GMT
|
Original-From:
|
Rob Limbaugh <RLimbaugh@greenfieldgroup.!spamcake!com>
|
Viewed:
|
1039 times
|
| |
|
|
Ruth,
If the tower works on another computer, then at least one of the
following will be true:
1) There is some sort of hardware conflict that is aggravated
by accessing the IR tower
2) There is a software conflict
3) The computer has a combination of I/O chipsets that just
don't work properly 100% of the time together
4) Something could be wrong with the USB circuitry (if on a
motherboard, that means the MB could be bad)
If the tower doesn't work on another computer, then have LEGO send you a
new tower.
Based on the discussion so far, my bet is that the tower itself is bad.
Hope that helps,
Rob
-----Original Message-----
From: Ruth [mailto:ruth_pozuelo@hotmail.com]
Sent: Tuesday, November 25, 2003 1:52 AM
To: lego-robotics@crynwr.com
Subject: Re: HELP, please! USB tower problems
In lugnet.robotics, "Alex Jayasundara" <AJayasundara@onfin.com> wrote:
> Hi,
>
> I would try this.
>
> 1. Using any other USB based device and test the USB port.
> 2. Scan the machine for viruses.
>
> Looks like you driver is getting uninstalled by an application. ( This
> is my own idea).
>
> Hope this helps.
>
> Alex Jayasundara
> ----- Original Message -----
> From: "Ruth" <ruth_pozuelo@hotmail.com>
> To: <lego-robotics@crynwr.com>
> Sent: Monday, November 24, 2003 12:10 PM
> Subject: Re: HELP, please! USB tower problems
>
>
> > I have check under USB Lego Tower Diagnost and it reads:
> >
> > The driver failed the AddDevice request (0x!F)
> >
> > Hope this helps.
> >
> > Thanks again,
> > Ruth
> >
> > In lugnet.robotics, Ruth Pozuelo Martinez wrote:
> > > Hello Rob, thanks for your reply.
> > >
> > > I have manually installed the new driver without any success. Even
> > > worst, now my tower doesn't work with RIS 2.0 either!
> > >
> > > Same thing, works for 20 seconds and then can not find the driver • anymore.
> > >
> > > Any other suggestions?
> > >
> > > I am really looking forward to start playing with it and this
> > > problem is driving me crazy.
> > >
> > > Ruth
> > >
> > >
> > >
> > > In lugnet.robotics, Rob Hendrix wrote:
> > > >
> > > > > My problem is that windows can only detect my USB tower for like
> > > > > 20 seconds.After that I get an error on the device manager (yellow
> > > > > (!) mark) telling me that it can't find the driver. If I install
> > > > > it again, it will work for another 20 seconds and same story • again.Very annoying!
> > > >
> > > > May not be of much help, but the 2.5 SDK from the Lego website has
> > > > an updated USB IR tower driver. You may try using it. I think you
> > > > may be able to go to the Lego website and search for "SDK" to find • the download link.
> > > > You will probably have to manually install the driver. Go to your
> > > > device manager and go to the properties for the USB tower. You can
> > > > update driver from there, and point to the new driver in the SDK
> > > > folder for the USB tower (should be somewhere like - c:\Lego
> > > > Software\Mindstorms SDK 2.5\USB tower) well...something like • that...
> > > >
> > > > Rob
> > > >
> > > > Hope it helps.
Hello Alex,
I have done as you suggested. I have a game pad and seems to work
without problems.
I know my computer does not have any virus because it is scanned every
night by our server.
Any other ideas?
I guess I will have to unistall everything (including windows) and start
again.
Thnaks for your suggestions.
Ruth
|
|
1 Message in This Thread:
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
Active threads in Robotics
|
|
|
|
|
|
