To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.roboticsOpen lugnet.robotics in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Robotics / 10408
10407  |  10409
Subject: 
Re: Repairing motors
Newsgroups: 
lugnet.robotics
Date: 
Mon, 31 Jan 2000 01:49:27 GMT
Viewed: 
3862 times
  
Simon Brooke wrote:

> Sorry for butting in - I haven't been subscribed to the list for some
> time because of pressure of work. This weekend I had a bit of time and
> got to the point of having nearly completed a robot I've been working on
> for some time; and I needed one more motor.
> 
> So I went into town and found the one toyshop open on a Sunday and found
> they had no motors individually, but one old and battered set 8266,
> which contains a motor apparently identical to the ones in the
> Mindstorms set; drove back home, plugged it in, and... nothing.
> **FRUSTRATION**
> 
> On inspection the motor is extremely stiff: you can't turn the shaft by
> hand at all. I've sprayed a lot of WD40 into it and got it rigged up
> with one of my other motors cranking it round with a reduction gear just
> now, and it's turning - but it still won't turn by hand.
> 
> Getting the backplate off is easy; but then there's the problem of
> getting the motor out. Chris Moseley posted to the list on 15 Oct 1998
> that 'it just drops out'. Not mine, they don't - neither the dead one
> nor one of my live ones which I took the back off for comparison.
> 
> If anyone can give me any advice either how to get the motor out of the
> body or what to do next I'd be exceedingly grateful.

I too have had trouble with the motors in this set. I own 9 Technic gear
motors (2 micro motors & an old motor) and have had two! bad motors from these
sets. They won't spin by hand and don't work well when powered.  I have no
idea why.

BUT, if you phone shop at home they will replace the motors FREE of charge.

Dean



Message is in Reply To:
  Repairing motors
 
Sorry for butting in - I haven't been subscribed to the list for some time because of pressure of work. This weekend I had a bit of time and got to the point of having nearly completed a robot I've been working on for some time; and I needed one (...) (27 years ago, 30-Jan-00, to lugnet.robotics)

2 Messages in This Thread:

Entire Thread on One Page:
Nested:  All | Brief | Compact | Dots
Linear:  All | Brief | Compact
    

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR