Special:
|
[DAT] (requires LDraw-compatible viewer)
|
Subject:
|
Re: Problem with part 30208.dat
|
Newsgroups:
|
lugnet.cad.dat.parts
|
Date:
|
Tue, 11 Sep 2007 07:58:40 GMT
|
Viewed:
|
4108 times
|
| |
|
|
In lugnet.cad.dat.parts, Matthew J. Chiles <mattchiles@gorge.net> wrote:
>
> On Mon, 10 Sep 2007 23:44:43 GMT, Tony wrote:
>
> > I recently CAD'd my Tequila Sunrise locomotive, which uses the part 30208.dat,
> > Cylinder 4 x 4 Hemisphere Multifaceted.
> >
> > As you can see in the render, the part is overlapping the arch piece on the
> > boiler:
> >
> > http://www.flickr.com/photos/savatheaggie/1338258406/
>
> That is a very pretty train.
>
> Yep, I think you are right. The 30208.dat part appears to be 4 LDU
> too tall, unless there are more than one brick version of this part.
> Unfortunate, because to correct it will probably take a complete
> reworking of the part.
>
> -Matt :)
Not necessary here, I just scaled the dome a bit to reduce size by 4 ldu. DAT
file joined, tell me if it's ok now...
Philo
0 Cylinder 4 x 4 Hemisphere Multifaceted
0 Name: 30208.DAT
0 Author: John VanZwieten
0 Official LCad update 99-02
0 // 2007-09-11 [Philo] flattened dome by 4 LDU (roughly done)
2 24 -23.34 0 -31.68 -23.34 -4 -31.68
2 24 23.34 0 -31.68 23.34 -4 -31.68
2 24 -22.17 0 -30.1 -22.17 -4 -30.1
2 24 22.17 0 -30.1 22.17 -4 -30.1
2 24 -23.34 0 -31.68 -15.31 0 -36.96
2 24 -15.31 0 -36.96 0 0 -40
2 24 23.34 0 -31.68 15.31 0 -36.96
2 24 15.31 0 -36.96 0 0 -40
2 24 -22.17 0 -30.1 -14.54 0 -35.11
2 24 -14.54 0 -35.11 0 0 -38
2 24 22.17 0 -30.1 14.54 0 -35.11
2 24 14.54 0 -35.11 0 0 -38
2 24 -23.34 0 -31.68 -22.17 0 -30.1
2 24 -23.34 -4 -31.68 -22.17 -4 -30.1
2 24 23.34 0 -31.68 22.17 0 -30.1
2 24 23.34 -4 -31.68 22.17 -4 -30.1
4 16 -23.34 0 -31.68 -15.31 0 -36.96 -15.31 -4 -36.96 -23.34 -4 -31.68
4 16 -15.31 0 -36.96 0 0 -40 0 -4 -40 -15.31 -4 -36.96
4 16 23.34 0 -31.68 15.31 0 -36.96 15.31 -4 -36.96 23.34 -4 -31.68
4 16 15.31 0 -36.96 0 0 -40 0 -4 -40 15.31 -4 -36.96
4 16 -22.17 0 -30.1 -14.54 0 -35.11 -14.54 -4 -35.11 -22.17 -4 -30.1
4 16 -14.54 0 -35.11 0 0 -38 0 -4 -38 -14.54 -4 -35.11
4 16 22.17 0 -30.1 14.54 0 -35.11 14.54 -4 -35.11 22.17 -4 -30.1
4 16 14.54 0 -35.11 0 0 -38 0 -4 -38 14.54 -4 -35.11
4 16 -23.34 0 -31.68 -15.31 0 -36.96 -14.54 0 -35.11 -22.17 0 -30.1
4 16 -15.31 0 -36.96 0 0 -40 0 0 -38 -14.54 0 -35.11
4 16 23.34 0 -31.68 15.31 0 -36.96 14.54 0 -35.11 22.17 0 -30.1
4 16 15.31 0 -36.96 0 0 -40 0 0 -38 14.54 0 -35.11
4 16 -23.34 0 -31.68 -23.34 -4 -31.68 -22.17 -4 -30.1 -22.17 0 -30.1
4 16 23.34 0 -31.68 23.34 -4 -31.68 22.17 -4 -30.1 22.17 0 -30.1
2 24 -31.68 0 23.34 -31.68 -4 23.34
2 24 -31.68 0 -23.34 -31.68 -4 -23.34
2 24 -30.096 0 22.173 -30.096 -4 22.173
2 24 -30.096 0 -22.173 -30.096 -4 -22.173
2 24 -31.68 0 23.34 -36.96 0 15.31
2 24 -36.96 0 15.31 -40 0 0
2 24 -31.68 0 -23.34 -36.96 0 -15.31
2 24 -36.96 0 -15.31 -40 0 0
2 24 -30.1 0 22.17 -35.11 0 14.54
2 24 -35.11 0 14.54 -38 0 0
2 24 -30.1 0 -22.17 -35.11 0 -14.54
2 24 -35.11 0 -14.54 -38 0 0
2 24 -31.68 0 23.34 -30.1 0 22.17
2 24 -31.68 -4 23.34 -30.1 -4 22.17
2 24 -31.68 0 -23.34 -30.1 0 -22.17
2 24 -31.68 -4 -23.34 -30.1 -4 -22.17
4 16 -31.68 0 23.34 -36.96 0 15.31 -36.96 -4 15.31 -31.68 -4 23.34
4 16 -36.96 0 15.31 -40 0 0 -40 -4 0 -36.96 -4 15.31
4 16 -31.68 0 -23.34 -36.96 0 -15.31 -36.96 -4 -15.31 -31.68 -4 -23.34
4 16 -36.96 0 -15.31 -40 0 0 -40 -4 0 -36.96 -4 -15.31
4 16 -30.1 0 22.17 -35.11 0 14.54 -35.11 -4 14.54 -30.1 -4 22.17
4 16 -35.11 0 14.54 -38 0 0 -38 -4 0 -35.11 -4 14.54
4 16 -30.1 0 -22.17 -35.11 0 -14.54 -35.11 -4 -14.54 -30.1 -4 -22.17
4 16 -35.11 0 -14.54 -38 0 0 -38 -4 0 -35.11 -4 -14.54
4 16 -31.68 0 23.34 -36.96 0 15.31 -35.11 0 14.54 -30.1 0 22.17
4 16 -36.96 0 15.31 -40 0 0 -38 0 0 -35.11 0 14.54
4 16 -31.68 0 -23.34 -36.96 0 -15.31 -35.11 0 -14.54 -30.1 0 -22.17
4 16 -36.96 0 -15.31 -40 0 0 -38 0 0 -35.11 0 -14.54
4 16 -31.68 0 23.34 -31.68 -4 23.34 -30.1 -4 22.17 -30.1 0 22.17
4 16 -31.68 0 -23.34 -31.68 -4 -23.34 -30.1 -4 -22.17 -30.1 0 -22.17
0
2 24 23.34 0 31.68 23.34 -4 31.68
2 24 -23.34 0 31.68 -23.34 -4 31.68
2 24 22.173 0 30.096 22.173 -4 30.096
2 24 -22.173 0 30.096 -22.173 -4 30.096
2 24 23.34 0 31.68 15.31 0 36.96
2 24 15.31 0 36.96 0 0 40
2 24 -23.34 0 31.68 -15.31 0 36.96
2 24 -15.31 0 36.96 0 0 40
2 24 22.17 0 30.1 14.54 0 35.11
2 24 14.54 0 35.11 0 0 38
2 24 -22.17 0 30.1 -14.54 0 35.11
2 24 -14.54 0 35.11 0 0 38
2 24 23.34 0 31.68 22.17 0 30.1
2 24 23.34 -4 31.68 22.17 -4 30.1
2 24 -23.34 0 31.68 -22.17 0 30.1
2 24 -23.34 -4 31.68 -22.17 -4 30.1
4 16 23.34 0 31.68 15.31 0 36.96 15.31 -4 36.96 23.34 -4 31.68
4 16 15.31 0 36.96 0 0 40 0 -4 40 15.31 -4 36.96
4 16 -23.34 0 31.68 -15.31 0 36.96 -15.31 -4 36.96 -23.34 -4 31.68
4 16 -15.31 0 36.96 0 0 40 0 -4 40 -15.31 -4 36.96
4 16 22.17 0 30.1 14.54 0 35.11 14.54 -4 35.11 22.17 -4 30.1
4 16 14.54 0 35.11 0 0 38 0 -4 38 14.54 -4 35.11
4 16 -22.17 0 30.1 -14.54 0 35.11 -14.54 -4 35.11 -22.17 -4 30.1
4 16 -14.54 0 35.11 0 0 38 0 -4 38 -14.54 -4 35.11
4 16 23.34 0 31.68 15.31 0 36.96 14.54 0 35.11 22.17 0 30.1
4 16 15.31 0 36.96 0 0 40 0 0 38 14.54 0 35.11
4 16 -23.34 0 31.68 -15.31 0 36.96 -14.54 0 35.11 -22.17 0 30.1
4 16 -15.31 0 36.96 0 0 40 0 0 38 -14.54 0 35.11
4 16 23.34 0 31.68 23.34 -4 31.68 22.17 -4 30.1 22.17 0 30.1
4 16 -23.34 0 31.68 -23.34 -4 31.68 -22.17 -4 30.1 -22.17 0 30.1
0
2 24 31.68 0 -23.34 31.68 -4 -23.34
2 24 31.68 0 23.34 31.68 -4 23.34
2 24 30.096 0 -22.173 30.096 -4 -22.173
2 24 30.096 0 22.173 30.096 -4 22.173
2 24 31.68 0 -23.34 36.96 0 -15.31
2 24 36.96 0 -15.31 40 0 0
2 24 31.68 0 23.34 36.96 0 15.31
2 24 36.96 0 15.31 40 0 0
2 24 30.1 0 -22.17 35.11 0 -14.54
2 24 35.11 0 -14.54 38 0 0
2 24 30.1 0 22.17 35.11 0 14.54
2 24 35.11 0 14.54 38 0 0
2 24 31.68 0 -23.34 30.1 0 -22.17
2 24 31.68 -4 -23.34 30.1 -4 -22.17
2 24 31.68 0 23.34 30.1 0 22.17
2 24 31.68 -4 23.34 30.1 -4 22.17
4 16 31.68 0 -23.34 36.96 0 -15.31 36.96 -4 -15.31 31.68 -4 -23.34
4 16 36.96 0 -15.31 40 0 0 40 -4 0 36.96 -4 -15.31
4 16 31.68 0 23.34 36.96 0 15.31 36.96 -4 15.31 31.68 -4 23.34
4 16 36.96 0 15.31 40 0 0 40 -4 0 36.96 -4 15.31
4 16 30.1 0 -22.17 35.11 0 -14.54 35.11 -4 -14.54 30.1 -4 -22.17
4 16 35.11 0 -14.54 38 0 0 38 -4 0 35.11 -4 -14.54
4 16 30.1 0 22.17 35.11 0 14.54 35.11 -4 14.54 30.1 -4 22.17
4 16 35.11 0 14.54 38 0 0 38 -4 0 35.11 -4 14.54
4 16 31.68 0 -23.34 36.96 0 -15.31 35.11 0 -14.54 30.1 0 -22.17
4 16 36.96 0 -15.31 40 0 0 38 0 0 35.11 0 -14.54
4 16 31.68 0 23.34 36.96 0 15.31 35.11 0 14.54 30.1 0 22.17
4 16 36.96 0 15.31 40 0 0 38 0 0 35.11 0 14.54
4 16 31.68 0 -23.34 31.68 -4 -23.34 30.1 -4 -22.17 30.1 0 -22.17
4 16 31.68 0 23.34 31.68 -4 23.34 30.1 -4 22.17 30.1 0 22.17
0
1 16 0 -4 0 36 0 0 0 1 0 0 0 36 4-4edge.dat
1 16 0 -4 0 40 0 0 0 1 0 0 0 40 4-4edge.dat
2 24 0 -39.3 6.351 5.5 -39.3 3.175
2 24 5.5 -39.3 3.175 5.5 -39.3 -3.175
2 24 5.5 -39.3 -3.175 0 -39.3 -6.351
2 24 0 -39.3 -6.351 -5.5 -39.3 -3.175
2 24 -5.5 -39.3 -3.175 -5.5 -39.3 3.175
2 24 -5.5 -39.3 3.175 0 -39.3 6.351
4 16 0 -39.3 6.351 5.5 -39.3 3.175 5.5 -39.3 -3.175 0 -39.3 -6.351
4 16 0 -39.3 6.351 -5.5 -39.3 3.175 -5.5 -39.3 -3.175 0 -39.3 -6.351
0
1 16 0 -4 0 1 0 0 0 0.892 0 0 0 1 s\30208-1.dat
1 16 0 -4 0 0.5 0 0.87 0 0.892 0 -0.87 0 0.5 s\30208-1.dat
1 16 0 -4 0 -0.5 0 0.87 0 0.892 0 -0.87 0 -0.5 s\30208-1.dat
1 16 0 -4 0 -1 0 0 0 0.892 0 0 0 -1 s\30208-1.dat
1 16 0 -4 0 -0.5 0 -0.87 0 0.892 0 0.87 0 -0.5 s\30208-1.dat
1 16 0 -4 0 0.5 0 -0.87 0 0.892 0 0.87 0 0.5 s\30208-1.dat
1 16 0 -4 0 36 0 0 0 -32 0 0 0 -36 4-8sphe.DAT
1 16 0 -4 0 3.6 0 0 0 0 0 0 0 3.6 ring10.DAT
1 16 0 -4 0 3.64 0 0 0 0 0 0 0 3.64 ring10.DAT
0
|
|
Message has 1 Reply:
 | | Re: Problem with part 30208.dat
|
| Please upload this version to the PT. Only by this it can be corrected completly. It is now so many years an official part and nowbody has realized that it was wrong. Your version works fine as I can see. There are also missing inner lines. So (...) (17 years ago, 11-Sep-07, to lugnet.cad.dat.parts)
|
Message is in Reply To:
| | Re: Problem with part 30208.dat
|
| (...) Yep, I think you are right. The 30208.dat part appears to be 4 LDU too tall, unless there are more than one brick version of this part. Unfortunate, because to correct it will probably take a complete reworking of the part. -Matt :) ---...--- (...) (17 years ago, 11-Sep-07, to lugnet.cad.dat.parts)
|
4 Messages in This Thread:
 
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
