| |
In lugnet.org.us.texlug, James Trobaugh writes:
> I don't mean to "butt" into y'alls group, but I was wondering how you plan
> on running two trains so that they can hit head-on? You can't do that with
> the standard out of the box LEGO train system. Are you (or have you)
> converted your trains to another control method, such as DCC?
Well, since you've "butt" in (which is just fine, any advice is welcome ;-)
how can you alter the direction of a train motor? Can you modify the motor
or controller?
TJ
|
|
| |
<Snip>
> how can you alter the direction of a train motor? Can you modify the motor
> or controller?
It is my experience that all of the train motors are directional. I
frequently use 2 motors per train and if you don't get them both going the
same direction, well, the train won't go anywhere. I usually look on the
bottom of the motors and and make sure the LEGO trademark's are going on the
same direction. In this case, make sure they are opposite of one another and
you should be able to get a nice head on crash.
Robert Powell
|
|
| |
Hate to disagree with you Robert, but the LEGO train motors don't work that
way. It doesn't matter which way you put them on the track, they will all
travel in the same direction. You can not run to motors on the same loop of
track in opposite directions.
jt
In lugnet.trains, Robert Powell writes:
> <Snip>
> > how can you alter the direction of a train motor? Can you modify the motor
> > or controller?
>
> It is my experience that all of the train motors are directional. I
> frequently use 2 motors per train and if you don't get them both going the
> same direction, well, the train won't go anywhere. I usually look on the
> bottom of the motors and and make sure the LEGO trademark's are going on the
> same direction. In this case, make sure they are opposite of one another and
> you should be able to get a nice head on crash.
>
> Robert Powell
|
|
| |
"James J. Trobaugh" wrote:
> Hate to disagree with you Robert, but the LEGO train motors don't work that
> way.
I thought he was kidding;-)
> It doesn't matter which way you put them on the track, they will all
> travel in the same direction. You can not run to motors on the same loop of
> track in opposite directions.
*Unless* you have altered them by adding a DCC chip, in which case you could.
-John
>
>
>
>
>
|
|
| |
In lugnet.trains, John Neal writes:
>
>
> "James J. Trobaugh" wrote:
>
> > Hate to disagree with you Robert, but the LEGO train motors don't work that
> > way.
>
> I thought he was kidding;-)
>
> > It doesn't matter which way you put them on the track, they will all
> > travel in the same direction. You can not run to motors on the same loop of
> > track in opposite directions.
>
> *Unless* you have altered them by adding a DCC chip, in which case you could.
>
> -John
Well yes that's true, or you could just open the motor and reverse some of
the wiring inside so that the motor runs the opposite direction of a stock
motor, but I really doubt it would be worth the effort.
If you really want to crash them, just put in a cross track....and wait for
the right moment. :)
jt
|
|
| |
Sorry guys! Yes, John caught me. I was gearing up for April 1 and forgot to
post it Off-topic.
|
|
|
