To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.trainsOpen lugnet.trains in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Trains / 19981
19980  |  19982
Subject: 
Re: using a european 12v transformer in the UK
Newsgroups: 
lugnet.trains
Date: 
Sun, 4 May 2003 00:12:21 GMT
Viewed: 
1836 times
  
In lugnet.trains, Sonnich Jensen writes:
> prize2707 <paul.1@virgin.net> wrote in message
> news:HE7t7t.1nDF@lugnet.com...
> > hi
> > 
> > does anyone know weather it is safe to use a european 12v transformer with • a
> > straight forward euro/uk plug adapter. i suppose the output would be the
> > same but would the extra uk voltage burn out he transformer?
> > 
> > thx for any help
> > 
> > paul
> 
> The specifications for mains voltage in Europe _was_ 220VAC +/- 10%, that is
> 198-242V, while the UK _was_ using 240VAC +/- 10%, that is 216-264V.
> You can check the voltage you have, as in the EU it _should_ be 230VAC
> (compromise solution). This is possible as equipment in both the UK and
> Europe should work with 230V, as specified above. Find a multimeter or
> voltage meter to measure that.
> I say if you have 230V there is no problem, if you have 240V it is within
> the limit where the equipment should work, but if you have a bit to much it
> might cause damage; even that I expect it work with 250V too, but I will not
> promise or guarantee that!
> 
> In Denmark there is 230V today, while some contries still have their old
> systems.
> 
> HTH
> S

As far as I know it should be perfectly ok. Especially since if anything
you're having over-voltage which is if I recall correctly less straining
generally than under-voltage.

Esger

PS. might any of you UK people be interested, I have a UK 7864 lying around
doing nothing...



Message is in Reply To:
  Re: using a european 12v transformer in the UK
 
prize2707 <paul.1@virgin.net> wrote in message news:HE7t7t.1nDF@lugnet.com... (...) a (...) The specifications for mains voltage in Europe _was_ 220VAC +/- 10%, that is 198-242V, while the UK _was_ using 240VAC +/- 10%, that is 216-264V. You can (...) (23 years ago, 1-May-03, to lugnet.trains)

6 Messages in This Thread:


Entire Thread on One Page:
Nested:  All | Brief | Compact | Dots
Linear:  All | Brief | Compact
    

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR