To LUGNET HomepageTo LUGNET News HomepageTo LUGNET Guide Homepage
 Help on Searching
 
Post new message to lugnet.robotics.handyboardOpen lugnet.robotics.handyboard in your NNTP NewsreaderTo LUGNET News Traffic PageSign In (Members)
 Robotics / Handy Board / 5952
5951  |  5953
Subject: 
Help Needed: Problem Solved!!
Newsgroups: 
lugnet.robotics.handyboard
Date: 
Sat, 3 Apr 1999 17:10:23 GMT
Original-From: 
MSMKatz <msmkatz@ANTISPAMwxs.nl>
Viewed: 
857 times
  
Hi everybody,

It took me nearly two weeks, but I've solved my "board not responding
problem"!

I had already checked all connections between components, everything ok.

What I hadn't done yet, is to check with my multimeter for possible
shorts on the board.
And: bingo!
Address line A14 (connects 6811, memory chip and 7404) had a short to
ground. All visible traces looked ok, so the short is either beneath a
socket or connector or in the board itself. I've cut the A14 trace on a
couple of places to locate the short: it's between the 65256 memory chip
(pin 1) and the through hole to the 7404. I've isolated the short and
soldered two wires to connect the components again.

Handy is working! No downloading problems anymore, IC3.2 runs smoothly
on my pentium computer.

Hopefully this feedback can be of help to other people running into
similar problems. Everybody who has sent suggestions to solve my
problem: I've very much appreciated your help, thanks again!! No doubt
I'll get back to you for help when I run into new challenges.

Best regards,

Marc Katz



Message has 2 Replies:
  Re: ICC11 setup help
 
Does anyone have experience with configuring Version 5.0 of the ICC11 compiler from ImageCraft? I need a little help setting up the compiler, and in figuring out how the whole thing works. Are there any web sites that deal with this compiler and the (...) (25 years ago, 3-Apr-99, to lugnet.robotics.handyboard)
  Re: ICC11 setup help
 
Imagecraft has a HB library (written by Chuck McManis) that can be downloaded from their web site. This library makes it very easy to compile programs for the HB. download it and copy all the *.h files to the ICC INCLUDE directory copy libhb.a to (...) (25 years ago, 3-Apr-99, to lugnet.robotics.handyboard)

3 Messages in This Thread:


Entire Thread on One Page:
Nested:  All | Brief | Compact | Dots
Linear:  All | Brief | Compact
    

Custom Search

©2005 LUGNET. All rights reserved. - hosted by steinbruch.info GbR