Special:
|
[DAT] (requires LDraw-compatible viewer)
|
Subject:
|
Technic Ribbed Hose (Example MPD file)
|
Newsgroups:
|
lugnet.cad.dat.parts
|
Date:
|
Tue, 2 May 2000 19:57:42 GMT
|
Viewed:
|
692 times
|
| |
|
|
Here's an example file featuring a Technic Ribbed Hose at 120 LDU
length. See lugnet.cad.dev for a reference.
The file names and descriptions are open for changes, obviously. The
latter especially applies due to my bad English.
Fredrik
0 FILE RIBD120U.DAT
0 Technic Ribbed Hose 120LDU Long (open file for usage guide)
0 Name: RIBD120U.DAT
0 Author: Fredrik Glöckner
0 Un-Official Element
0 If you have a Ribbed Technic Hose you want to model in LDraw, you may
0 want to start by counting the number of "notches" on it. Each subpart
0 "RIBDEND.DAT" and "RIBDSEG.DAT" is used to model one single notch, the
0 former one at the end and the latter an arbitrary one in the middle.
0 The distance between each notch should be 6.2LDU, and each subpart has
0 the notch centered in the origin. For the end segments "RIBDEND.DAT",
0 the distance from the origin to the very end of the hose is 2.5LDU.
0 This way, the example hose below has a total length of 116.6LDU: Each
0 of the 17 segments have a length of 6.2LDU, while the end segments
0 have a length of 3.1LDU+2.5LDU each.
0 Note that the actual length of each hose segment is slightly longer
0 than 6.2LDU. This is chosen so that the segments overlap if used to
0 model a curved hose.
1 0 55.8 0 0 0 1 0 1 0 0 0 0 -1 RIBDEND.DAT
1 0 49.6 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 43.4 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 37.2 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 31 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 24.8 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 18.6 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 12.4 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 6.2 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 0 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -6.2 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -12.4 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -18.6 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -24.8 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -31 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -37.2 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -43.4 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -49.6 0 0 0 -1 0 1 0 0 0 0 1 RIBDSEG.DAT
1 0 -55.8 0 0 0 -1 0 1 0 0 0 0 1 RIBDEND.DAT
0
0 FILE RIBDSEG.DAT
0 Technic Ribbed Hose Segment
0 Name: RIBDSEG.DAT
0 Author: Fredrik Glöckner, adapted from th.DAT by Mark R. David
0 Un-Official Element
1 16 0 1.5 0 -6.5 0 0 0 1.8 0 0 0 6.5 4-4cyli.dat
1 16 0 1.5 0 -6.5 0 0 0 0 0 0 0 6.5 4-4edge.dat
1 16 0 1.5 0 -2 0 0 0 0 0 0 0 2 ring3.dat
1 16 0 1.5 0 -8 0 0 0 0 0 0 0 8 4-4edge.dat
1 16 0 1 0 1 0 0 0 0.5 0 0 0 1 4-4co89.dat
1 16 0 1 0 -9 0 0 0 -2 0 0 0 9 4-4cyli.dat
1 16 0 -1 0 1 0 0 0 -0.5 0 0 0 -1 4-4co89.dat
1 16 0 -1.5 0 -8 0 0 0 0 0 0 0 8 4-4edge.dat
1 16 0 -1.5 0 -2 0 0 0 0 0 0 0 2 ring3.dat
1 16 0 -1.5 0 -6.5 0 0 0 0 0 0 0 6.5 4-4edge.dat
1 16 0 -1.5 0 -6.5 0 0 0 -1.8 0 0 0 6.5 4-4cyli.dat
0
0 FILE RIBDEND.DAT
0 Technic Ribbed Hose End Segment
0 Name: RIBDEND.DAT
0 Author: Fredrik Glöckner, adapted from th.DAT by Mark R. David
0 Un-Official Element
1 16 0 2.5 0 6 0 0 0 0 0 0 0 6 4-4edge.dat
1 16 0 2.5 0 6.5 0 0 0 0 0 0 0 6.5 4-4edge.dat
1 16 0 1.5 0 6 0 0 0 1 0 0 0 6 4-4cyli.dat
1 16 0 1.5 0 6.5 0 0 0 1 0 0 0 6.5 4-4cyli.dat
1 16 0 1.5 0 6 0 0 0 0 0 0 0 6 4-4edge.dat
1 16 0 1.5 0 6.5 0 0 0 0 0 0 0 6.5 4-4edge.dat
1 16 0 1.5 0 2 0 0 0 0 0 0 0 2 ring3.dat
1 16 0 1.5 0 8 0 0 0 0 0 0 0 8 4-4edge.dat
1 16 0 1 0 1 0 0 0 0.5 0 0 0 1 4-4co89.dat
1 16 0 -1 0 9 0 0 0 2 0 0 0 9 4-4cyli.dat
1 16 0 -1 0 1 0 0 0 -0.5 0 0 0 -1 4-4co89.dat
1 16 0 -1.5 0 8 0 0 0 0 0 0 0 8 4-4edge.dat
1 16 0 -1.5 0 2 0 0 0 0 0 0 0 2 ring3.dat
1 16 0 -1.5 0 6.5 0 0 0 0 0 0 0 6.5 4-4edge.dat
1 16 0 -1.5 0 6.5 0 0 0 -1.8 0 0 0 6.5 4-4cyli.dat
0
0 FILE 4-4co89.dat
0 Cone 8:9 Ratio
0 Name: 4-4co89.dat
0 Author: Mark R. David, adapted from 4-4con12 by Steve Bliss
0 Un-Official element
4 16 0 1 8 -3.062 1 7.391 -3.444 0 8.315 0 0 9
5 24 0 1 8 0 0 9 3.062 1 7.391 -3.062 1 7.391
4 16 -3.062 1 7.391 -5.657 1 5.657 -6.364 0 6.364 -3.444 0 8.315
5 24 -3.062 1 7.391 -3.444 0 8.315 0 1 8 -5.657 1 5.657
4 16 -5.657 1 5.657 -7.391 1 3.062 -8.315 0 3.444 -6.364 0 6.364
5 24 -5.657 1 5.657 -6.364 0 6.364 -3.062 1 7.391 -7.391 1 3.062
4 16 -7.391 1 3.062 -8 1 0 -9 0 0 -8.315 0 3.444
5 24 -7.391 1 3.062 -8.315 0 3.444 -5.657 1 5.657 -8 1 0
4 16 -8 1 0 -7.391 1 -3.062 -8.315 0 -3.444 -9 0 0
5 24 -8 1 0 -9 0 0 -7.391 1 3.062 -7.391 1 -3.062
4 16 -7.391 1 -3.062 -5.657 1 -5.657 -6.364 0 -6.364 -8.315 0 -3.444
5 24 -7.391 1 -3.062 -8.315 0 -3.444 -8 1 0 -5.657 1 -5.657
4 16 -5.657 1 -5.657 -3.062 1 -7.391 -3.444 0 -8.315 -6.364 0 -6.364
5 24 -5.657 1 -5.657 -6.364 0 -6.364 -7.391 1 -3.062 -3.062 1 -7.391
4 16 -3.062 1 -7.391 0 1 -8 0 0 -9 -3.444 0 -8.315
5 24 -3.062 1 -7.391 -3.444 0 -8.315 -5.657 1 -5.657 0 1 -8
4 16 0 1 -8 3.062 1 -7.391 3.444 0 -8.315 0 0 -9
5 24 0 1 -8 0 0 -9 -3.062 1 -7.391 3.062 1 -7.391
4 16 3.062 1 -7.391 5.657 1 -5.657 6.364 0 -6.364 3.444 0 -8.315
5 24 3.062 1 -7.391 3.444 0 -8.315 0 1 -8 5.657 1 -5.657
4 16 5.657 1 -5.657 7.391 1 -3.062 8.315 0 -3.444 6.364 0 -6.364
5 24 5.657 1 -5.657 6.364 0 -6.364 3.062 1 -7.391 7.391 1 -3.062
4 16 7.391 1 -3.062 8 1 0 9 0 0 8.315 0 -3.444
5 24 7.391 1 -3.062 8.315 0 -3.444 5.657 1 -5.657 8 1 0
4 16 8 1 0 7.391 1 3.062 8.315 0 3.444 9 0 0
5 24 8 1 0 9 0 0 7.391 1 -3.062 7.391 1 3.062
4 16 7.391 1 3.062 5.657 1 5.657 6.364 0 6.364 8.315 0 3.444
5 24 7.391 1 3.062 8.315 0 3.444 8 1 0 5.657 1 5.657
4 16 5.657 1 5.657 3.062 1 7.391 3.444 0 8.315 6.364 0 6.364
5 24 5.657 1 5.657 6.364 0 6.364 7.391 1 3.062 3.062 1 7.391
4 16 3.062 1 7.391 0 1 8 0 0 9 3.444 0 8.315
5 24 3.062 1 7.391 3.444 0 8.315 5.657 1 5.657 0 1 8
0
|
|
Message has 1 Reply:
2 Messages in This Thread:
  
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
