Subject:
|
Re: Minifig Scale Issaquah Ferry
|
Newsgroups:
|
lugnet.build
|
Date:
|
Wed, 26 Mar 2003 19:57:56 GMT
|
Viewed:
|
434 times
|
| |
|
|
In lugnet.announce.moc, Wayne R. Hussey writes:
> Although this has been completed and shown publically (NWBrickCon Oct.
> 2002), I have just now gotten around to posting some of my pics of it.
>
> These show some of the details and the construction process.
>
> http://www.brickshelf.com/cgi-bin/gallery.cgi?f=25801
>
> It is seven feet long, two feet wide and two and a half feet high. It
> required 35,000 pieces, mostly bricks, plates and slopes. It has taken me
> several years to acquire the parts. The most difficult part was the 1x6x3
> Panoramic windows. These have not been in production for 25 years and there
> are 44 of them in the model.
>
> It was necessary to enter the entire model into MLCAD in order to make sure
> I knew what pieces I didn't have. As I was building the finished model, I
> was constantly running back to my computer to verify the location and
> arrangement of some of the pieces and to modify the data file to record
> changes where I had to provide better structure.
>
> There were many surprises as the model took shape. The major surprise was
> that the deck flooring, or "sheets", made of two layers of plates tended to
> curl.
>
> I am not quite sure I understand why this happens, but I believe that it is
> caused by the upper plate being stretched to cover the lower plate. In large
> sheets, the upper plates pull the lower plates toward the (geographic)
> center and lift the edges. After building the ISD, where large sheets were
> also used, I learned that the best way to keep the sheets flat is to use
> only strips of plates on the top layer. Unfortunately, in my design, the top
> layer is the "show" layer and needed to be solid.
>
> I am grateful for LEGO Direct, Bricklink* and eBay for providing a means to
> my ends.
>
> * Amazing Brick, thank you Carol!
> * Ozparts, thank you Darren!
> * Pyrite, thank you Brett!
>
> There are too many to thank all of those who aided me, but the orders I made
> to these three were critical!
>
> PLMKWYT
>
> Wayne
Remarkable! I saw this thing on brickshelf a couple of days ago and wanted to
post about it, but I figured I'd wait until you publicly announced it. The
pictures of all the structural reinforcing that went into building this is
quite impressive. The back end, with the curves and ramps to the second floor,
look like sculpture. Well done!
I think that the reason the deck bowed like that is the nature of the way these
parts are made. In order for normal plastic parts to be injectable, they need
to have a draft, or angle, on the vertical walls, otherwise the part wouldn't
slide out (think of the way an ice cube tray is designed for an extreme
example) I suspect that lego parts have a very very slight draft on them,
barely enough to allow them to be released, but not enough to really be visible
to the naked eye. It only shows up with a long chain of parts like this, where
the slightly non-vertical surfaces conspire to curl long plate sheets.
Adrian
--
http://www.brickfrenzy.com
|
|
Message is in Reply To:
 | | Minifig Scale Issaquah Ferry
|
| Although this has been completed and shown publically (NWBrickCon Oct. 2002), I have just now gotten around to posting some of my pics of it. These show some of the details and the construction process. (URL) is seven feet long, two feet wide and (...) (22 years ago, 26-Mar-03, to lugnet.announce.moc) !!
|
13 Messages in This Thread:
 
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
