Special:
|
[DAT] (requires LDraw-compatible viewer)
|
Subject:
|
2860.dat preview
|
Newsgroups:
|
lugnet.cad.dat.parts
|
Date:
|
Thu, 23 Jan 2003 20:25:00 GMT
|
Viewed:
|
1213 times
|
| |
|
|
Hi,
This is a preview from a piece used in the 9V points. The 9V points are
build up with 5 different pieces. For example
Right hand point : 2859
Bottom plate : 2863
Point tongue : 2860
Point tongue command rod : 2864
Yellow lever : 2866
I would like you all to take a look at the file header, so that i can make
changes if nessesarry before upload to the PARTS TRACKER.
Be aware that some pieces will be / can be re-positioned after this check
and before upload to the parts tracker.
p.s.
1) For the main piece - the point itself (2859 & 2861) - you will need a lot
of patience, because we (Manfred & myself) will try to bringout the curved
track before the points. This is because we can re-use some code from the
curved track into the point !
2) I still need part numbers from the lefthand point. I need the part number
of the LEFTHAND point tongue and the LEFTHAND point bottom plate. All other
parts - point tongue command rod & yellow lever - are identical.
Thanks for your support.
Ludo Soete
0 Train Track 9V Points Right - Point Tongue
0 Name: 2860.DAT
0 Author: Soete Ludo <ludo.soete@village.uunet.be>
0 Unofficial Element
0 BFC NOCERTIFY
0 COMMENT : basis vlak
4 16 2.5 0 -15.25 2.5 0 -10.25 5 0 -10.25 5 0 -15.25
1 16 -2.5 0 -15.25 0 0 2.5 0 1 0 -2.5 0 0 1-4ring2.dat
4 16 -2.5 0 -20.25 -76 0 -20.25 -76 0 -22.75 -2.5 0 -22.75
4 16 -76 0 -21.5 -86 0 -21.5 -86 0 -22.75 -76 0 -22.75
4 16 -86 0 -20.25 -106 0 -20.25 -106 0 -22.75 -86 0 -22.75
4 16 -103.5 0 -20.25 -106 0 -20.25 -106 0 7.5 -103.5 0 7.5
4 16 -106 0 7.5 -86 0 7.5 -86 0 10 -106 0 10
4 16 -86 0 8.75 -86 0 10 -76 0 10 -76 0 8.75
4 16 -76 0 7.5 -76 0 10 -2.5 0 10 -2.5 0 7.5
0 COMMENT : grondvlakjes dicht bij rotatiepunt
4 16 -2.5 0 7.5 .3703 0 7.5 .3703 0 9.429 -2.5 0 10
4 16 .3703 0 7.5 2.8032 0 7.5 2.8032 0 7.8032 .3703 0 9.429
3 16 2.8032 0 7.5 2.8032 0 7.8032 2.9287 0 7.5
2 24 2.5 0 -10.25 5 0 -10.25
2 24 2.5 0 -15.25 2.5 0 -10.25
2 24 2.5 0 -10.25 2.5 -5.5 -10.25
1 16 -2.5 0 -15.25 0 0 5 0 8 0 -5 0 0 1-4edge.dat
2 24 -2.5 0 -20.25 -76 0 -20.25
2 24 -76 0 -20.25 -76 -6.5 -20.25
2 24 -76 0 -21.5 -76 0 -20.25
2 24 -76 0 -21.5 -76 -6.5 -21.5
2 24 -76 0 -21.5 -86 0 -21.5
2 24 -86 0 -21.5 -86 -6.5 -21.5
2 24 -86 0 -21.5 -86 0 -20.25
2 24 -86 0 -20.25 -86 -6.5 -20.25
2 24 -86 0 -21.5 -86 -5.5 -21.5
2 24 -86 0 -20.25 -103.5 0 -20.25
2 24 -103.5 0 -20.25 -103.5 -3 -20.25
2 24 -103.5 0 -20.25 -103.25 0 7.5
2 24 -103.5 0 7.5 -103.5 -3 7.5
2 24 -103.5 0 7.5 -86 0 7.5
2 24 -86 0 7.5 -86 -6.5 7.5
2 24 -86 0 7.5 -86 0 8.75
2 24 -86 0 8.75 -86 -6.5 8.75
2 24 -76 0 8.75 -86 0 8.75
2 24 -76 0 8.75 -76 -6.5 8.75
2 24 -76 0 7.5 -76 0 8.75
2 24 -76 0 7.5 -76 -6.5 7.5
0 COMMENT : lengte ok!!
2 24 -76 0 7.5 2.9287 0 7.5
2 24 2.9287 0 7.5 2.9287 -5.5 7.5
0 COMMENT : randen ronding dicht bij rotatiepunt (basis vlak)
2 24 -2.5 0 10 .3702 0 9.4292
2 24 .3702 0 9.4292 2.8032 0 7.8032
2 24 2.8032 0 7.8032 2.9287 0 7.5
2 24 5 0 -15.25 5 0 -10.25
1 16 -2.5 0 -15.25 0 0 7.5 0 8 0 -7.5 0 0 1-4edge.dat
2 24 -2.5 0 -22.75 -106 0 -22.75
2 24 -106 0 -22.75 -106 -5 -22.75
2 24 -106 0 10 -106 0 -22.75
2 24 -106 0 10 -106 -14 10
2 24 -2.5 0 10 -106 0 10
2 24 5 -5.5 -10.25 5 0 -10.25
2 24 5 -5.5 -10.25 2.5 -5.5 -10.25
0 COMMENT : rechtopstaande binnen zijde
4 16 2.5 0 -15.25 2.5 0 -10.25 2.5 -5.5 -10.25 2.5 -5.5 -15.25
1 16 -2.5 -5.5 -15.25 0 0 5 0 5.5 0 -5 0 0 1-4cyli.dat
4 16 -2.5 0 -20.25 -76 0 -20.25 -76 -5.5 -20.25 -2.5 -5.5 -20.25
4 16 -76 0 -21.5 -76 0 -20.25 -76 -6.5 -20.25 -76 -6.5 -21.5
4 16 -76 0 -21.5 -86 0 -21.5 -86 -6.5 -21.5 -76 -6.5 -21.5
4 16 -86 0 -21.5 -86 0 -20.25 -86 -6.5 -20.25 -86 -6.5 -21.5
4 16 -86 0 -20.25 -94.75 0 -20.25 -94.75 -5.5 -20.25 -86 -5.5 -20.25
4 16 -94.75 0 -20.25 -103.5 0 -20.25 -103.5 -3 -20.25 -94.75 -3 -20.25
0
4 16 -103.5 0 -20.25 -103.25 0 7.5 -103.5 -3 7.5 -103.5 -3 -20.25
0
4 16 -94.75 0 7.5 -103.5 0 7.5 -103.5 -3 7.5 -94.75 -3 7.5
4 16 -86 0 7.5 -94.75 0 7.5 -94.75 -5.5 7.5 -86 -5.5 7.5
4 16 -86 0 7.5 -86 0 8.75 -86 -6.5 8.75 -86 -6.5 7.5
4 16 -76 0 8.75 -86 0 8.75 -86 -6.5 8.75 -76 -6.5 8.75
4 16 -76 0 7.5 -76 0 8.75 -76 -6.5 8.75 -76 -6.5 7.5
0 COMMENT :lengte ok!!
4 16 -76 0 7.5 -76 -5.5 7.5 2.9287 -5.5 7.5 2.9287 0 7.5
4 16 5 0 -10.25 2.5 0 -10.25 2.5 -5.5 -10.25 5 -5.5 -10.25
0
0 COMMENT : horizontale binnen vlakken
1 16 -99.125 -3 -6.375 4.375 0 0 0 1 0 0 0 13.875 rect.dat
4 16 -94.75 -3 7.5 -94.75 -3 -20.25 -94.75 -5.5 -20.25 -94.75 -5.5 7.5
1 16 -90.375 -5.5 -6.375 4.375 0 0 0 1 0 0 0 13.875 rect.dat
4 16 -86 -5.5 -20.25 -86 -5.5 7.5 -86 -6.5 7.5 -86 -6.5 -20.25
1 16 -81 -6.5 -6.375 5 0 0 0 1 0 0 0 15.125 rect.dat
4 16 -76 -5.5 -20.25 -76 -5.5 7.5 -76 -6.5 7.5 -76 -6.5 -20.25
1 16 -73.5 -5.5 -6.375 2.5 0 0 0 1 0 0 0 13.875 rect.dat
0 COMMENT : groot horizontaal vlak voor veertje & rotatie pin
4 16 -69 -5.5 -20.25 -69 -5.5 7.5 -51.1641 -5.5 7.5 -51.1641 -5.5 -20.25
3 16 -51.1641 -5.5 7.5 -50.773 -5.5 7.5 -51.1641 -5.5 5.8021
4 16 -32.178 -5.5 1.0232 -31.9042 -5.5 2.7516 -51.1641 -5.5 5.8021 -51.1641 -5.5 -20.25
4 16 -17.3626 -5.5 -1.3233 -32.178 -5.5 1.0232 -51.1641 -5.5 -20.25 -17.3626 -5.5 -20.25
4 16 -17.0889 -5.5 .4051 -17.3626 -5.5 -1.3233 -17.3623 -5.5 -20.25 -2.5 -5.5 -20.25
1 16 -2.5 -5.5 -15.25 0 0 7.5 0 8 0 -7.5 0 0 1-4disc.dat
4 16 2.5 -5.5 -10.25 2.5 -5.5 2.5 5 -5.5 2.5 5 -5.5 -10.25
4 16 -2.5 -5.5 -15.25 -2.5 -5.5 2.5 2.5 -5.5 2.5 2.5 -5.5 -15.25
3 16 -17.0889 -5.5 .4051 -2.5 -5.5 -20.25 -4.2489 -5.5 -1.6285
4 16 -3.8578 -5.5 .8407 -4.2489 -5.5 -1.6285 -2.5 -5.5 -20.25 -2.5 -5.5 .8407
3 16 -3.8578 -5.5 .8407 -2.5 -5.5 .8407 -2.5 -5.5 7.5
4 16 -2.5 -5.5 7.5 -16.424 -5.5 4.6028 -16.6978 -5.5 2.8744 -3.8578 -5.5 .8407
4 16 -2.5 -5.5 7.5 -31.2394 -5.5 7.5 -31.2394 -5.5 6.9493 -16.424 -5.5 4.6028
4 16 -31.2394 -5.5 7.5 -45.75 -5.5 7.5 -31.5131 -5.5 5.2209 -31.2394 -5.5 6.9493
2 24 -50.773 -5.5 7.5 -51.1641 -5.5 5.8021
2 24 -94.75 -3 7.5 -94.75 -5.5 7.5
2 24 -94.75 -3 -20.25 -94.75 -5.5 -20.25
2 24 -69 -5.5 7.5 2.9287 -5.5 7.5
2 24 -69 -5.5 -20.25 -2.5 -5.5 -20.25
1 16 -2.5 -5.5 -15.25 0 0 5 0 8 0 -5 0 0 1-4edge.dat
2 24 2.5 -5.5 -15.25 2.5 -5.5 -10.25
0 COMMENT : schotje en pinnen voor het veertje
4 16 -71 -5.5 -20 -71 -5.5 7.5 -71 -3 7.5 -71 -3 -20
4 16 -69 -5.5 -20 -69 -5.5 7.5 -69 -3 7.5 -69 -3 -20
1 16 -70 -3 -15.25 1 0 0 0 1 0 0 0 5 rect.dat
1 16 -70 -3 1.25 1 0 0 0 1 0 0 0 6.25 rect.dat
4 16 -71 -3 -10 -71 -3 -5 -71 1 -5 -71 1 -10
4 16 -69 -3 -10 -69 -3 -5 -69 1 -5 -69 1 -10
4 16 -71 -3 -5 -69 -3 -5 -69 1 -5 -71 1 -5
4 16 -71 -3 -10 -69 -3 -10 -69 1 -10 -71 1 -10
1 16 -70 1 -7.5 1 0 0 0 1 0 0 0 2.5 rect.dat
0 COMMENT :Inlined:1 14 -61.25 -5.5 -7.5 1 0 0 0 1 0 0 0 1 2860springpin.dat
1 16 -61.25 -5.5 -7.5 1.25 0 0 0 5.5 0 0 0 1.25 4-4cyli.dat
1 16 -61.25 -4.25 -7.5 2.5 0 0 0 4.25 0 0 0 2.5 4-4cyli.dat
1 16 -61.25 -5.5 -7.5 3.75 0 0 0 1.25 0 0 0 3.75 4-4cyli.dat
1 16 -61.25 -5.5 -7.5 3.75 0 0 0 1 0 0 0 3.75 4-4edge.dat
1 16 -61.25 -4.25 -7.5 3.75 0 0 0 1 0 0 0 3.75 4-4edge.dat
1 16 -61.25 -4.25 -7.5 2.5 0 0 0 1 0 0 0 2.5 4-4edge.dat
1 16 -61.25 0 -7.5 2.5 0 0 0 1 0 0 0 2.5 4-4edge.dat
1 16 -61.25 -5.5 -7.5 1.25 0 0 0 1 0 0 0 1.25 4-4edge.dat
1 16 -61.25 0 -7.5 1.25 0 0 0 1 0 0 0 1.25 4-4edge.dat
1 16 -61.25 0 -7.5 1.25 0 0 0 1 0 0 0 1.25 ring1.dat
1 16 -61.25 -4.25 -7.5 1.25 0 0 0 1 0 0 0 1.25 ring2.dat
0
0 COMMENT : Inlined:1 14 -43.75 -5.5 -7.5 1 0 0 0 1 0 0 0 1 2860springpinkort.dat
1 16 -43.75 -5.5 -7.5 1.25 0 0 0 5.5 0 0 0 1.25 4-4cyli.dat
1 16 -43.75 -4.25 -7.5 2.5 0 0 0 3.75 0 0 0 2.5 4-4cyli.dat
1 16 -43.75 -5.5 -7.5 3.75 0 0 0 1.25 0 0 0 3.75 4-4cyli.dat
1 16 -43.75 -.5 -7.5 1.25 0 0 0 1 0 0 0 1.25 ring2.dat
1 16 -43.75 -.5 -7.5 3.75 0 0 0 .5 0 0 0 3.75 4-4cyli.dat
1 16 -43.75 0 -7.5 1.25 0 0 0 1 0 0 0 1.25 ring2.dat
1 16 -43.75 0 -7.5 1.25 0 0 0 1 0 0 0 1.25 ring1.dat
1 16 -43.75 -4.25 -7.5 1.25 0 0 0 1 0 0 0 1.25 ring2.dat
1 16 -43.75 -5.5 -7.5 3.75 0 0 0 1 0 0 0 3.75 4-4edge.dat
1 16 -43.75 -4.25 -7.5 3.75 0 0 0 1 0 0 0 3.75 4-4edge.dat
1 16 -43.75 -4.25 -7.5 2.5 0 0 0 1 0 0 0 2.5 4-4edge.dat
1 16 -43.75 -.5 -7.5 2.5 0 0 0 1 0 0 0 2.5 4-4edge.dat
1 16 -43.75 -5.5 -7.5 1.25 0 0 0 1 0 0 0 1.25 4-4edge.dat
1 16 -43.75 0 -7.5 1.25 0 0 0 1 0 0 0 1.25 4-4edge.dat
1 16 -43.75 -.5 -7.5 3.75 0 0 0 1 0 0 0 3.75 4-4edge.dat
1 16 -43.75 0 -7.5 3.75 0 0 0 1 0 0 0 3.75 4-4edge.dat
0
2 24 -71 -5.5 -20.25 -71 -3 -20.25
2 24 -71 -5.5 7.5 -71 -3 7.5
2 24 -71 -3 -5 -71 1 -5
2 24 -69 -3 -5 -69 1 -5
2 24 -71 -3 -10 -71 1 -10
2 24 -69 -3 -10 -69 1 -10
2 24 -69 -5.5 -20.25 -69 -3 -20.25
2 24 -69 -5.5 7.5 -69 -3 7.5
2 24 -69 -5.5 -20.25 -69 -5.5 7.5
0 COMMENT : Buiten zijde
4 16 -2.5 -5.5 10 .3702 -5.5 9.4292 .3702 0 9.4292 -2.5 0 10
5 24 -2.5 -5.5 10 -2.5 0 10 .3702 -5.5 9.4292 -10 -5.5 10
4 16 .3702 -5.5 9.4292 2.8032 -5.5 7.8032 2.8032 0 7.8032 .3702 0 9.4292
5 24 .3702 -5.5 9.4292 .3702 0 9.4292 2.8032 -5.5 7.8032 -2.5 -5.5 10
4 16 2.8032 -5.5 7.8032 2.9287 -5.5 7.5 2.9287 0 7.5 2.8032 0 7.8032
5 24 2.8032 -5.5 7.8032 2.8032 0 7.8032 4.4293 -5.5 5.3702 .3702 -5.5 9.4292
1 16 -2.5 -8 2.5 0 0 7.5 0 2.5 0 7.5 0 0 1-4cyli.dat
1 16 -2.5 -5.5 2.5 0 0 7.5 0 2.5 0 7.5 0 0 1-4disc.dat
4 16 -2.5 0 10 -106 0 10 -106 -8 10 -2.5 -8 10
4 16 -106 0 10 -106 0 -22.75 -106 -5 -22.75 -106 -5 10
4 16 -2.5 0 -22.75 -106 0 -22.75 -106 -5 -22.75 -2.5 -5 -22.75
4 16 -2.5 -5 -22.75 -97 -5 -22.75 -97 -8 -22.75 -2.5 -8 -22.75
1 16 -2.5 -8 -15.25 0 0 7.5 0 8 0 -7.5 0 0 1-4cyli.dat
4 16 5 0 -15.25 5 0 -10.25 5 -8 -10.25 5 -8 -15.25
4 16 5 -8 -10.25 5 -8 2.5 5 -5.5 2.5 5 -5.5 -10.25
2 24 5 -5.5 2.5 5 -5.5 -10.25
2 24 5 -8 -10.25 5 -8 -4.8653
0 COMMENT : bovenste horizontale vlakken naast rail
1 16 -101.625 -5 -7.5 4.375 0 0 0 1 0 0 0 15.25 rect.dat
4 16 -97.25 -5 -22.75 -97.25 -5 7.5 -97.25 -8 7.5 -97.25 -8 -22.75
4 16 -97.25 -8 -22.75 -97.25 -8 8 -51.438 -8 4.074 -51.438 -8 -22.75
1 16 -2.5 -8 -15.25 0 0 7.5 0 8 0 -7.5 0 0 1-4disc.dat
4 16 -51.438 -8 -22.75 -51.438 -8 -15.25 -2.5 -8 -15.25 -2.5 -8 -22.75
4 16 -51.438 -8 -15.25 -51.438 -8 4.074 5 -8 -4.7549 5 -8 -15.25
2 24 -97.25 -5 -22.75 -97.25 -8 -22.75
2 24 -97.25 -5 7.5 -97.25 -8 7.5
2 24 -97.25 -8 7.5 -97.25 -8 -22.75
2 24 -97.25 -8 -22.75 -2.5 -8 -22.75
1 16 -2.5 -8 -15.25 0 0 7.5 0 8 0 -7.5 0 0 1-4edge.dat
2 24 5 -8 -10.25 5 -8 -15.25
2 24 -51.4379 -8 4.0737 -32.178 -8 1.0232
2 24 -17.3626 -8 -1.3233 5 -8 -4.8653
0 COMMENT : randen ronding dicht bij rotatiepunt (Y=-5.5)
2 24 2.9287 -5.5 7.5 4.4293 -5.5 5.3702
2 24 4.4293 -5.5 5.3702 5 -5.5 2.5
0 COMMENT : rechtopstaannde zijkantje links van het 'trapje' (scherpe kant rail stuk)
4 16 -106 -5 7.5 -106 -5 10 -106 -8 10 -106 -8 7.5
4 16 -106 -5 7.5 -97.25 -5 7.5 -97.25 -8 7.5 -106 -8 7.5
4 16 -106 -8 7.5 -97.25 -8 7.5 -97.25 -8 8 -106 -8 8.5
2 24 -106 -8 7.5 -106 -8 8.5
2 24 -106 -8 7.5 -97.25 -8 7.5
2 24 -106 -5 7.5 -106 -8 7.5
2 24 -106 -8 8.5 -104 -8 8.5
0 COMMENT : afdichten driehoekige bovenzijde naast railstuk
1 16 -2.5 -8 2.5 0 0 7.5 0 2.5 0 7.5 0 0 1-4disc.dat
1 16 -2.5 -8 2.5 0 0 7.5 0 2.5 0 7.5 0 0 1-4edge.dat
3 16 -2.5 -8 2.5 -50.4993 -8 10 -2.5 -8 10
3 16 5 -8 2.5 5 -8 1.211 -2.5 -8 2.5
2 24 -2.5 -8 10 -50.4993 -8 10
5 24 -50.4993 -8 10 -50.4993 -11 10 -104 -16 10 -31.2394 -11 6.9493
2 24 -50.4993 -8 9.9998 -31.2394 -8 6.9493
2 24 -16.424 -8 4.6028 4.9909 -8 1.211
2 24 5 -8 2.5 5 -8 1.211
0 COMMENT : railstuk
4 16 -106 -8 8.5 -106 -8 10 -106 -14 10 -106 -14 8.5
4 16 -106 -8 10 -106 -14 10 -104 -16 10 -104 -8 10
4 16 -106 -8 8.5 -106 -14 8.5 -104 -16 8.5 -104 -8 8.5
4 16 -106 -14 10 -106 -14 8.5 -104 -16 8.5 -104 -16 10
4 16 -104 -8 10 -104 -16 10 -50.4993 -16 10 -50.4993 -8 10
4 16 -104 -8 8.5 -51.438 -8 4.074 -51.438 -16 4.074 -104 -16 8.5
4 16 -104 -16 8.5 -104 -16 10 -50.4993 -16 10 -51.438 -16 4.074
2 24 -106 -14 10 -106 -14 8.5
2 24 -106 -8 8.5 -106 -14 8.5
2 24 -106 -14 10 -104 -16 10
2 24 -106 -14 8.5 -104 -16 8.5
2 24 -104 -16 8.5 -104 -16 10
2 24 -104 -8 8.5 -51.438 -8 4.074
2 24 -104 -16 8.5 -51.438 -16 4.074
2 24 -104 -16 10 -50.5 -16 10
5 24 -104 -8 8.5 -104 -16 8.5 -106 -8 8.5 -51.438 -8 4.074
5 24 -51.438 -8 4.074 -51.438 -16 4.074 -104 -8 8.5 -51.4379 -8 4.0737
0
0
0 Inlined:1 16 -24.301 0 2.813 1 0 0 0 1 0 0 0 1 2860_R11.dat
0 Name: 2860_1.DAT
0 Author: Soete Ludo <ludo.soete@village.uunet.be>
0 Unofficial Element
0 Schuin rail stukje zonder metalen rail plaatje
0 COMMENT : rotation = 9 degree around Y-axis
4 16 -50.4993 -8 9.9998 -50.4993 -11 9.9998 -31.2394 -11 6.9493 -31.2394 -8 6.9493
4 16 -31.2394 -8 6.9493 -32.178 -8 1.0232 -32.178 -13 1.0232 -31.2394 -13 6.9493
4 16 -51.4379 -8 4.0737 -51.4379 -11 4.0737 -32.178 -11 1.0232 -32.178 -8 1.0232
3 16 -47.7341 -11 3.487 -51.4379 -11 4.0737 -51.4379 -16 4.0737
4 16 -31.5131 -5.5 5.2209 -31.5131 -8 5.2209 -31.2394 -8 6.9493 -31.2394 -5.5 6.9493
4 16 -31.9042 -5.5 2.7516 -31.9042 -8 2.7516 -32.178 -8 1.0232 -32.178 -5.5 1.0232
4 16 -32.178 -11 1.0232 -34.6472 -11 1.4143 -34.6472 -13 1.4143 -32.178 -13 1.0232
4 16 -31.2394 -11 6.9493 -33.7086 -11 7.3404 -33.7086 -13 7.3404 -31.2394 -13 6.9493
4 16 -31.5131 -8 5.2209 -50.773 -8 8.2713 -50.773 -5.5 8.2713 -31.5131 -5.5 5.2209
4 16 -31.9042 -8 2.7516 -51.1641 -8 5.8021 -51.1641 -5.5 5.8021 -31.9042 -5.5 2.7516
4 16 -31.5131 -8 5.2209 -50.773 -8 8.2713 -51.1641 -8 5.8021 -31.9042 -8 2.7516
4 16 -50.773 -8 8.2713 -51.1641 -8 5.8021 -51.1641 -5.5 5.8021 -50.773 -5.5 8.2713
0
4 16 -16.424 -8 4.6028 -16.424 -11 4.6028 4.9909 -11 1.211 4.9909 -8 1.211
4 16 -16.424 -8 4.6028 -17.3626 -8 -1.3233 -17.3626 -13 -1.3233 -16.424 -13 4.6028
4 16 -17.3626 -8 -1.3233 -17.3626 -11 -1.3233 5.0007 -11 -4.8653 5.0007 -8 -4.8653
4 16 2.8359 -11 1.5523 2.8359 -16 1.5523 5.0007 -16 1.2095 5.0007 -11 1.2095
4 16 4.9909 -8 1.211 4.9909 -16 1.211 5.0007 -16 -4.8653 5.0007 -8 -4.8653
4 16 -1.8065 -11 -3.7872 1.8973 -16 -4.3738 5.0007 -16 -4.8653 5.0007 -11 -4.8653
4 16 -16.6978 -5.5 2.8744 -16.6978 -8 2.8744 -16.424 -8 4.6028 -16.424 -5.5 4.6028
4 16 -17.0889 -5.5 .4051 -17.0889 -8 .4051 -17.3626 -8 -1.3233 -17.3626 -5.5 -1.3233
4 16 -17.3626 -11 -1.3233 -14.8934 -11 -1.7144 -14.8934 -13 -1.7144 -17.3626 -13 -1.3233
4 16 -16.424 -11 4.6028 -13.9548 -11 4.2117 -13.9548 -13 4.2117 -16.424 -13 4.6028
4 16 -16.6978 -8 2.8744 -4.3517 -8 .9189 -4.3517 -5.5 .9189 -16.6978 -5.5 2.8744
4 16 -17.0889 -8 .4051 -4.7428 -8 -1.5503 -4.7428 -5.5 -1.5503 -17.0889 -5.5 .4051
4 16 -16.6978 -8 2.8744 -4.3517 -8 .9189 -4.7428 -8 -1.5503 -17.0889 -8 .4051
4 16 -4.3517 -8 .9189 -4.7428 -8 -1.5503 -4.7428 -5.5 -1.5503 -4.3517 -5.5 .9189
0 COMMENT : afsluiten bovenzijde gat in rail
4 16 -19.2843 -13 2.5247 -29.1612 -13 4.089 -29.3177 -13 3.1013 -19.4408 -13 1.537
4 16 -18.8933 -13 4.9939 -16.424 -13 4.6028 -17.3626 -13 -1.3233 -19.8319 -13 -.9322
4 16 -28.7701 -13 6.5582 -31.2394 -13 6.9493 -32.178 -13 1.0232 -29.7087 -13 .6321
0
4 16 -16.424 -8 4.6028 -16.424 -5.5 4.6028 -31.2394 -5.5 6.9493 -31.2394 -8 6.9493
4 16 -17.3626 -8 -1.3233 -17.3626 -5.5 -1.3233 -32.178 -5.5 1.0232 -32.178 -8 1.0232
0 COMMENT :Top vlak
4 16 2.8359 -16 1.5523 5.0007 -16 1.2095 5.0007 -16 -4.8653 1.8973 -16 -4.3738
0
2 24 5.0007 -16 1.2095 5.0007 -16 -4.8653
2 24 5.0007 -16 1.2095 5.0007 -8 1.2095
2 24 5.0007 -16 -4.8653 5.0007 -8 -4.8653
2 24 -16.424 -5.5 4.6028 -31.2394 -5.5 6.9493
2 24 -16.424 -8 4.6028 -31.2394 -8 6.9493
2 24 -17.3626 -5.5 -1.3233 -32.178 -5.5 1.0232
2 24 -17.3626 -8 -1.3233 -32.178 -8 1.0232
2 24 2.8359 -16 1.5523 5.0007 -16 1.2095
2 24 1.8973 -16 -4.3738 5.0007 -16 -4.8653
0
2 24 -31.2394 -13 6.9493 -31.2394 -5.5 6.9493
2 24 -32.178 -13 1.0232 -32.178 -5.5 1.0232
2 24 -31.9042 -8 2.7516 -31.9042 -5.5 2.7516
2 24 -31.5131 -8 5.2209 -31.5131 -5.5 5.2209
2 24 -31.5131 -8 5.2209 -31.9042 -8 2.7516
2 24 -31.2394 -13 6.9493 -32.178 -13 1.0232
2 24 -31.5131 -8 5.2209 -50.773 -8 8.2713
2 24 -31.9042 -8 2.7516 -51.1641 -8 5.8021
2 24 -31.5131 -5.5 5.2209 -50.773 -5.5 8.2713
2 24 -31.9042 -5.5 2.7516 -51.1641 -5.5 5.8021
2 24 -50.773 -8 8.2713 -50.773 -5.5 8.2713
2 24 -51.1641 -8 5.8021 -51.1641 -5.5 5.8021
2 24 -50.773 -8 8.2713 -51.1641 -8 5.8021
2 24 -16.6978 -5.5 2.8744 -16.424 -5.5 4.6028
2 24 -17.0889 -5.5 .4051 -17.3626 -5.5 -1.3233
0
2 24 -16.424 -13 4.6028 -16.424 -5.5 4.6028
2 24 -17.3626 -13 -1.3233 -17.3626 -5.5 -1.3233
2 24 -17.0889 -8 .4051 -17.0889 -5.5 .4051
2 24 -16.6978 -8 2.8744 -16.6978 -5.5 2.8744
2 24 -16.6978 -8 2.8744 -17.0889 -8 .4051
2 24 -16.424 -13 4.6028 -17.3626 -13 -1.3233
2 24 -16.6978 -5.5 2.8744 -4.3517 -5.5 .9189
2 24 -17.0889 -5.5 .4051 -4.7428 -5.5 -1.5503
2 24 -16.6978 -8 2.8744 -4.3517 -8 .9189
2 24 -17.0889 -8 .4051 -4.7428 -8 -1.5503
2 24 -4.3517 -5.5 .9189 -4.3517 -8 .9189
2 24 -4.7428 -5.5 -1.5503 -4.7428 -8 -1.5503
2 24 -4.3517 -8 .9189 -4.7428 -8 -1.5503
2 24 -31.5131 -5.5 5.2209 -31.2394 -5.5 6.9493
2 24 -31.9042 -5.5 2.7516 -32.178 -5.5 1.0232
0
0 COMMENT : Rotatie pin / Rotation point
0 Inlined:1 14 0 0 0 1 0 0 0 1 0 0 0 1 2860rotpointDAT.dat
0 COMMENT :
0 Inlined:1 4 0 -3 0 2.5 0 0 0 1 0 0 0 2.5 4-4edge.dat
2 24 1.5 -3 1.95 .9567 -3 2.3098
2 24 .9567 -3 2.3098 0 -3 2.5
2 24 0 -3 2.5 -.9567 -3 2.3098
2 24 -.9567 -3 2.3098 -1.5 -3 1.95
2 24 -1.5 -3 -1.95 -.9567 -3 -2.3098
2 24 -.9567 -3 -2.3098 0 -3 -2.5
2 24 0 -3 -2.5 .9567 -3 -2.3098
2 24 .9567 -3 -2.3098 1.5 -3 -1.95
0
2 24 -1.5 -3 4.7 -1.5 -3 1.95
2 24 -1.5 -3 -4.7 -1.5 -3 -1.95
2 24 1.5 -3 4.7 1.5 -3 1.95
2 24 1.5 -3 -4.7 1.5 -3 -1.95
0
0 COMMENT : binnen diameter= 2mm
1 16 0 -5.5 0 2.5 0 0 0 2.5 0 0 0 2.5 4-4cyli.dat
0 0
1 16 0 -5.5 0 5 0 0 0 1 0 0 0 5 4-4edge.dat
0 COMMENT : buitend diameter = 4mm
1 16 0 -5.5 0 5 0 0 0 2.5 0 0 0 5 4-4cyli.dat
0 COMMENT : 1° kwadrant
4 16 0 -3 2.5 -.9567 -3 2.3098 -1.5 -3 3.6 0 -3 5
3 16 -1.5 -3 4.7 -1.5 -3 3.6 0 -3 5
3 16 -.9567 -3 2.3098 -1.5 -3 1.95 -1.5 -3 3.6
0 COMMENT : 2° kwadrant
4 16 0 -3 -2.5 -.9567 -3 -2.3098 -1.5 -3 -3.6 0 -3 -5
3 16 -1.5 -3 -4.7 -1.5 -3 -3.6 0 -3 -5
3 16 -.9567 -3 -2.3098 -1.5 -3 -1.95 -1.5 -3 -3.6
0 COMMENT : 3° kwadrant
4 16 0 -3 -2.5 .9567 -3 -2.3098 1.5 -3 -3.6 0 -3 -5
3 16 1.5 -3 -4.7 1.5 -3 -3.6 0 -3 -5
3 16 .9567 -3 -2.3098 1.5 -3 -1.95 1.5 -3 -3.6
0 COMMENT : 4° kwadrant
4 16 0 -3 2.5 .9567 -3 2.3098 1.5 -3 3.6 0 -3 5
3 16 1.5 -3 4.7 1.5 -3 3.6 0 -3 5
3 16 .9567 -3 2.3098 1.5 -3 1.95 1.5 -3 3.6
0
2 24 1.5 -3 4.7 0 -3 5
2 24 0 -3 5 -1.5 -3 4.7
2 24 -1.5 -3 -4.7 0 -3 -5
2 24 0 -3 -5 1.5 -3 -4.7
0
0 COMMENT : 1° kwadrant
5 24 1.7677 -3 1.7677 1.7677 6.5 1.7677 .9567 -3 2.3098 2.3098 -3 .9567
4 16 -1.7677 -3 1.7677 -2.3098 -3 .9567 -2.3098 6.5 .9567 -1.7677 6.5 1.7677
5 24 -1.7677 -3 1.7677 -1.7677 6.5 1.7677 -2.3098 -3 .9567 -.9567 -3 2.3098
4 16 -2.3098 -3 .9567 -2.5 -3 0 -2.5 6.5 0 -2.3098 6.5 .9567
5 24 -2.3098 -3 .9567 -2.3098 6.5 .9567 -2.5 -3 0 -1.7677 -3 1.7677
0 toegevoegde lijnen
4 16 -1.7677 -3 1.7677 -1.7677 6.5 1.7677 -1.5 6.5 1.95 -1.5 -3 1.95
2 24 -1.5 -3 1.95 -1.5 6.5 1.95
0 COMMENT : 2° kwadrant
4 16 -2.5 -3 0 -2.3098 -3 -.9567 -2.3098 6.5 -.9567 -2.5 6.5 0
5 24 -2.5 -3 0 -2.5 6.5 0 -2.3098 -3 -.9567 -2.3098 -3 .9567
4 16 -2.3098 -3 -.9567 -1.7677 -3 -1.7677 -1.7677 6.5 -1.7677 -2.3098 6.5 -.9567
5 24 -2.3098 -3 -.9567 -2.3098 6.5 -.9567 -1.7677 -3 -1.7677 -2.5 -3 0
5 24 -1.7677 -3 -1.7677 -1.7677 6.5 -1.7677 -.9567 -3 -2.3098 -2.3098 -3 -.9567
0 toegevoegde lijnen 2° kwadrant
4 16 -1.7677 -3 -1.7677 -1.7677 6.5 -1.7677 -1.5 6.5 -1.95 -1.5 -3 -1.95
2 24 -1.5 -3 -1.95 -1.5 6.5 -1.95
0 COMMENT : 3° kwadrant
4 16 1.7677 -3 -1.7677 2.3098 -3 -.9567 2.3098 6.5 -.9567 1.7677 6.5 -1.7677
5 24 1.7677 -3 -1.7677 1.7677 6.5 -1.7677 2.3098 -3 -.9567 .9567 -3 -2.3098
4 16 2.3098 -3 -.9567 2.5 -3 0 2.5 6.5 0 2.3098 6.5 -.9567
5 24 2.3098 -3 -.9567 2.3098 6.5 -.9567 2.5 -3 0 1.7677 -3 -1.7677
0 toegevoegde lijnen 3° kwadrant
4 16 1.7677 -3 -1.7677 1.7677 6.5 -1.7677 1.5 6.5 -1.95 1.5 -3 -1.95
2 24 1.5 -3 -1.95 1.5 6.5 -1.95
0 COMMENT : 4° kwadrant
4 16 2.5 -3 0 2.3098 -3 .9567 2.3098 6.5 .9567 2.5 6.5 0
5 24 2.5 -3 0 2.5 6.5 0 2.3098 -3 .9567 2.3098 -3 -.9567
4 16 2.3098 -3 .9567 1.7677 -3 1.7677 1.7677 6.5 1.7677 2.3098 6.5 .9567
5 24 2.3098 -3 .9567 2.3098 6.5 .9567 1.7677 -3 1.7677 2.5 -3 0
0 toegevoegde lijnen 4° kwadrant
4 16 1.7677 -3 1.7677 1.7677 6.5 1.7677 1.5 6.5 1.95 1.5 -3 1.95
2 24 1.5 -3 1.95 1.5 6.5 1.95
0
4 16 1.5 -3 1.95 1.5 -3 4.7 1.5 6.5 4.7 1.5 6.5 1.95
4 16 1.5 -3 -1.95 1.5 -3 -4.7 1.5 6.5 -4.7 1.5 6.5 -1.95
4 16 -1.5 -3 -1.95 -1.5 -3 -4.7 -1.5 6.5 -4.7 -1.5 6.5 -1.95
4 16 -1.5 -3 1.95 -1.5 -3 4.7 -1.5 6.5 4.7 -1.5 6.5 1.95
0
0 Inlined:1 16 0 -3 0 5 0 0 0 9.5 0 0 0 5 4-4cyli.dat
2 24 -1.5 -3 4.7 -1.5 6.5 4.7
4 16 -1.5 -3 4.7 -1.9135 -3 4.6195 -1.9135 6.5 4.6195 -1.5 6.5 4.7
4 16 -1.9135 -3 4.6195 -3.5355 -3 3.5355 -3.5355 6.5 3.5355 -1.9135 6.5 4.6195
5 24 -1.9135 -3 4.6195 -1.9135 6.5 4.6195 -3.5355 -3 3.5355 0 -3 5
4 16 -3.5355 -3 3.5355 -4.6195 -3 1.9135 -4.6195 6.5 1.9135 -3.5355 6.5 3.5355
5 24 -3.5355 -3 3.5355 -3.5355 6.5 3.5355 -4.6195 -3 1.9135 -1.9135 -3 4.6195
4 16 -4.6195 -3 1.9135 -5 -3 0 -5 6.5 0 -4.6195 6.5 1.9135
5 24 -4.6195 -3 1.9135 -4.6195 6.5 1.9135 -5 -3 0 -3.5355 -3 3.5355
4 16 -5 -3 0 -4.6195 -3 -1.9135 -4.6195 6.5 -1.9135 -5 6.5 0
5 24 -5 -3 0 -5 6.5 0 -4.6195 -3 -1.9135 -4.6195 -3 1.9135
4 16 -4.6195 -3 -1.9135 -3.5355 -3 -3.5355 -3.5355 6.5 -3.5355 -4.6195 6.5 -1.9135
5 24 -4.6195 -3 -1.9135 -4.6195 6.5 -1.9135 -3.5355 -3 -3.5355 -5 -3 0
4 16 -3.5355 -3 -3.5355 -1.9135 -3 -4.6195 -1.9135 6.5 -4.6195 -3.5355 6.5 -3.5355
5 24 -3.5355 -3 -3.5355 -3.5355 6.5 -3.5355 -1.9135 -3 -4.6195 -4.6195 -3 -1.9135
4 16 -1.5 -3 -4.7 -1.9135 -3 -4.6195 -1.9135 6.5 -4.6195 -1.5 6.5 -4.7
2 24 -1.5 -3 -4.7 -1.5 6.5 -4.7
5 24 -1.9135 -3 -4.6195 -1.9135 6.5 -4.6195 0 -3 -5 -3.5355 -3 -3.5355
0
0 Inlined:1 16 0 -3 0 5 0 0 0 7 0 0 0 5 4-4cyli.dat
4 16 5 -3 0 4.6195 -3 1.9135 4.6195 4 1.9135 5 4 0
5 24 5 -3 0 5 4 0 4.6195 -3 1.9135 4.6195 -3 -1.9135
4 16 4.6195 -3 1.9135 3.5355 -3 3.5355 3.5355 4 3.5355 4.6195 4 1.9135
5 24 4.6195 -3 1.9135 4.6195 4 1.9135 3.5355 -3 3.5355 5 -3 0
4 16 3.5355 -3 3.5355 1.9135 -3 4.6195 1.9135 4 4.6195 3.5355 4 3.5355
5 24 3.5355 -3 3.5355 3.5355 4 3.5355 1.9135 -3 4.6195 4.6195 -3 1.9135
4 16 1.5 -3 4.7 1.9135 -3 4.6195 1.9135 4 4.6195 1.5 4 4.7
2 24 1.5 -3 4.7 1.5 4 4.7
4 16 1.5 -3 -4.7 1.9135 -3 -4.6195 1.9135 4 -4.6195 1.5 4 -4.7
2 24 1.5 -3 -4.7 1.5 4 -4.7
4 16 1.9135 -3 -4.6195 3.5355 -3 -3.5355 3.5355 4 -3.5355 1.9135 4 -4.6195
5 24 1.9135 -3 -4.6195 1.9135 4 -4.6195 3.5355 -3 -3.5355 0 -3 -5
4 16 3.5355 -3 -3.5355 4.6195 -3 -1.9135 4.6195 4 -1.9135 3.5355 4 -3.5355
5 24 3.5355 -3 -3.5355 3.5355 4 -3.5355 4.6195 -3 -1.9135 1.9135 -3 -4.6195
4 16 4.6195 -3 -1.9135 5 -3 0 5 4 0 4.6195 4 -1.9135
5 24 4.6195 -3 -1.9135 4.6195 4 -1.9135 5 -3 0 3.5355 -3 -3.5355
0
0 Inlined:1 16 0 4 0 5 0 0 0 1 0 0 0 5 4-4edge.dat
0
2 24 5 4 0 4.6195 4 1.9135
2 24 4.6195 4 1.9135 3.5355 4 3.5355
2 24 3.5355 4 3.5355 1.9135 4 4.6195
2 24 1.9135 4 4.6195 1.5 4 4.7
2 24 1.9135 4 -4.6195 1.5 4 -4.7
2 24 1.9135 4 -4.6195 3.5355 4 -3.5355
2 24 3.5355 4 -3.5355 4.6195 4 -1.9135
2 24 4.6195 4 -1.9135 5 4 0
0
2 24 6.25 4 0 5.7744 4 2.3919
2 24 5.7744 4 2.3919 4.4194 4 4.4194
2 24 4.4194 4 4.4194 2.3919 4 5.7744
2 24 2.3919 4 5.7744 1.5 4 5.95
2 24 1.5 4 -5.95 2.3919 4 -5.7744
2 24 2.3919 4 -5.7744 4.4194 4 -4.4194
2 24 4.4194 4 -4.4194 5.7744 4 -2.3919
2 24 5.7744 4 -2.3919 6.25 4 0
0
4 16 1.9135 4 4.6195 1.5 4 4.7 1.5 4 5.95 2.3919 4 5.7744
4 16 3.5355 4 3.5355 1.9135 4 4.6195 2.3919 4 5.7744 4.4194 4 4.4194
4 16 4.6194 4 1.9134 3.5356 4 3.5356 4.4196 4 4.4195 5.7742 4 2.3918
4 16 5 4 0 4.6195 4 1.9135 5.7744 4 2.3918 6.25 4 0
4 16 4.6194 4 -1.9134 5.0001 4 0 6.2502 4 0 5.7742 4 -2.3918
4 16 3.5355 4 -3.5355 4.6195 4 -1.9135 5.7744 4 -2.3918 4.4194 4 -4.4194
4 16 1.9134 4 -4.6194 3.5356 4 -3.5356 4.4195 4 -4.4195 2.3918 4 -5.7742
4 16 1.9135 4 -4.6195 1.5 4 -4.7 1.5 4 -5.95 2.3919 4 -5.7744
2 24 1.5 4 4.7 1.5 4 5.95
2 24 1.5 4 -4.7 1.5 4 -5.95
0
4 16 1.9135 6.5 4.6195 1.5 6.5 4.7 1.5 4 5.95 2.3919 4 5.7744
4 16 3.5355 6.5 3.5355 1.9135 6.5 4.6195 2.3919 4 5.7744 4.4194 4 4.4194
4 16 4.6195 6.5 1.9135 3.5355 6.5 3.5355 4.4194 4 4.4194 5.7744 4 2.3919
4 16 5 6.5 0 4.6195 6.5 1.9135 5.7744 4 2.3919 6.25 4 0
4 16 4.6194 6.5 -1.9134 5.0001 6.5 0 6.2502 4 .0001 5.7742 4 -2.3918
4 16 3.5355 6.5 -3.5355 4.6195 6.5 -1.9135 5.7745 4 -2.3918 4.4194 4 -4.4194
4 16 1.9134 6.5 -4.6194 3.5356 6.5 -3.5356 4.4196 4 -4.4195 2.3918 4 -5.7742
4 16 1.9135 6.5 -4.6195 1.5 6.5 -4.7 1.5 4 -5.95 2.3919 4 -5.7744
3 16 1.5 6.5 -4.7 1.5 4 -5.95 1.5 4 -4.7
3 16 1.5 6.5 4.7 1.5 4 5.95 1.5 4 4.7
2 24 1.5 6.5 4.7 1.5 4 5.95
2 24 1.5 6.5 -4.7 1.5 4 -5.95
5 24 1.9135 6.5 4.6195 2.3919 4 5.7744 1.5 6.5 4.7 4.4194 4 4.4194
5 24 3.5355 6.5 3.5355 4.4194 4 4.4194 2.3919 4 5.7744 5.7744 4 2.3919
5 24 4.6195 6.5 1.9135 5.7744 4 2.3919 4.4194 4 4.4194 5.7744 4 2.3919
5 24 5.0001 6.5 0 6.2502 4 .0001 5.7742 4 2.3918 6.2502 4 .0001
5 24 4.6195 6.5 -1.9135 5.7745 4 -2.3918 6.25 4 0 5.7745 4 -2.3918
5 24 3.5356 6.5 -3.5356 4.4196 4 -4.4195 5.7742 4 -2.3918 4.4196 4 -4.4195
5 24 1.9135 6.5 -4.6195 2.3919 4 -5.7744 4.4194 4 -4.4194 2.3919 4 -5.7744
2 24 1.5 6.5 4.7 1.5 6.5 1.95
2 24 1.5 6.5 -4.7 1.5 6.5 -1.95
0 COMMENT : afdichten pin
0 Inlined:1 4 0 6.5 0 5 0 0 0 1 0 0 0 5 4-4edge.dat
2 24 1.5 6.5 -4.7 1.9135 6.5 -4.6195
2 24 1.9135 6.5 -4.6195 3.5355 6.5 -3.5355
2 24 3.5355 6.5 -3.5355 4.6195 6.5 -1.9135
2 24 4.6195 6.5 -1.9135 5 6.5 0
2 24 5 6.5 0 4.6195 6.5 1.9135
2 24 4.6195 6.5 1.9135 3.5355 6.5 3.5355
2 24 3.5355 6.5 3.5355 1.9135 6.5 4.6195
2 24 1.9135 6.5 4.6195 1.5 6.5 4.7
0
0 Inlined:1 16 0 6.5 0 2.5 0 0 0 1 0 0 0 2.5 ring1.dat
3 16 -1.5 6.5 4.7 -1.9135 6.5 4.6195 -1.5 6.5 1.95
4 16 -1.5 6.5 1.95 -1.7677 6.5 1.7677 -3.5355 6.5 3.5355 -1.9135 6.5 4.6195
4 16 -1.7677 6.5 1.7677 -2.3098 6.5 .9567 -4.6195 6.5 1.9135 -3.5355 6.5 3.5355
4 16 -2.3098 6.5 .9567 -2.5 6.5 0 -5 6.5 0 -4.6195 6.5 1.9135
4 16 -2.5 6.5 0 -2.3098 6.5 -.9567 -4.6195 6.5 -1.9135 -5 6.5 0
4 16 -2.3098 6.5 -.9567 -1.7677 6.5 -1.7677 -3.5355 6.5 -3.5355 -4.6195 6.5 -1.9135
3 16 -1.5 6.5 -4.7 -1.9135 6.5 -4.6195 -1.5 6.5 -1.95
4 16 -1.5 6.5 -1.95 -1.7677 6.5 -1.7677 -3.5355 6.5 -3.5355 -1.9135 6.5 -4.6195
0
3 16 1.5 6.5 -4.7 1.9135 6.5 -4.6195 1.5 6.5 -1.95
4 16 1.5 6.5 -1.95 1.7677 6.5 -1.7677 3.5355 6.5 -3.5355 1.9135 6.5 -4.6195
4 16 1.7677 6.5 -1.7677 2.3098 6.5 -.9567 4.6195 6.5 -1.9135 3.5355 6.5 -3.5355
4 16 2.3098 6.5 -.9567 2.5 6.5 0 5 6.5 0 4.6195 6.5 -1.9135
4 16 2.5 6.5 0 2.3098 6.5 .9567 4.6195 6.5 1.9135 5 6.5 0
4 16 2.3098 6.5 .9567 1.7677 6.5 1.7677 3.5355 6.5 3.5355 4.6195 6.5 1.9135
4 16 1.5 6.5 1.95 1.7677 6.5 1.7677 3.5355 6.5 3.5355 1.9135 6.5 4.6195
3 16 1.5 6.5 4.7 1.9135 6.5 4.6195 1.5 6.5 1.95
0
0 Inlined:1 4 0 6.5 0 2.5 0 0 0 1 0 0 0 2.5 4-4edge.dat
2 24 2.5 6.5 0 2.3098 6.5 .9567
2 24 2.3098 6.5 .9567 1.7677 6.5 1.7677
2 24 1.7677 6.5 1.7677 1.5 6.5 1.95
2 24 -1.7677 6.5 1.7677 -1.5 6.5 1.95
2 24 -1.7677 6.5 1.7677 -2.3098 6.5 .9567
2 24 -2.3098 6.5 .9567 -2.5 6.5 0
2 24 -2.5 6.5 0 -2.3098 6.5 -.9567
2 24 -2.3098 6.5 -.9567 -1.7677 6.5 -1.7677
2 24 -1.7677 6.5 -1.7677 -1.5 6.5 -1.95
2 24 1.7677 6.5 -1.7677 1.5 6.5 -1.95
2 24 1.7677 6.5 -1.7677 2.3098 6.5 -.9567
2 24 2.3098 6.5 -.9567 2.5 6.5 0
0
2 24 -1.5 6.5 4.7 -1.5 6.5 1.95
2 24 -1.5 6.5 -4.7 -1.5 6.5 -1.95
0
0 Inlined:1 4 0 6.5 0 5 0 0 0 1 0 0 0 5 4-4edge.dat
2 24 -1.5 6.5 4.7 -1.9135 6.5 4.6195
2 24 -1.9135 6.5 4.6195 -3.5355 6.5 3.5355
2 24 -3.5355 6.5 3.5355 -4.6195 6.5 1.9135
2 24 -4.6195 6.5 1.9135 -5 6.5 0
2 24 -5 6.5 0 -4.6195 6.5 -1.9135
2 24 -4.6195 6.5 -1.9135 -3.5355 6.5 -3.5355
2 24 -3.5355 6.5 -3.5355 -1.9135 6.5 -4.6195
2 24 -1.9135 6.5 -4.6195 -1.5 6.5 -4.7
0
0
1 383 0 0 0 1 0 0 0 1 0 0 0 1 s\2860s01.dat
0
|
|
Message has 1 Reply:
 | | Re: 2860.dat preview
|
| (...) Just looking at the header: 0 Train Track 9V Point Right Tongue 0 Name: 2860.dat 0 Author: Soete Ludo <ludo.soete@village.uunet.be> 0 Unofficial Element 0 BFC NOCERTIFY (In my previous replies, I used 'Left Point' and 'Right Point' in the (...) (21 years ago, 26-Jan-03, to lugnet.cad.dat.parts)
|
2 Messages in This Thread:
 
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
