| | | | |
This is the first phase of my Railway Cannon project.
This gun, although smaller, is very much based on the
Schwerer Gustav, aka Dora.
The TARC (Tabletown Army Railway Cannon) MkI- AKA the Mighty Lizbet is a 300mm
Railway Cannon capable of projecting a high explosive shell over a distance of
25 miles.
Go here for full information!
I plan on (eventually) building a locomotive, 2 troop wagons and a crane and
ammunition carriage to go with the gun itself, but that will take time.
Dr. S.
| | | | | | | | | | | | |
| |
| These are the remaining elements to go with my Railway Cannon project.
The front carriage is the ammunition store and loading platform - its the same
height as the breech on the cannon itself. Ammunition is loaded up a small ramp
and then slides along a rail and into the cannon.
The rearmost carriages are the two troop wagons. In reality, they would not sit
together, one would sit behind the train engine and in front of the cannon and
the other at the rear of the whole train. They are inset at the back because the
barrel of the gun pokes forward and space will be needed at the rear of the
carriage in front of the gun itself, and also so that weapons can be mounted on
the rear to defend the train from attack.
I have decided to use the engine from
set 7898 as my locomotive. For
one thing, its green, for another, its pretty much what I want, with a few
modifications. And lastly, I have never built an engine from scratch before -
Id likely screw it up, and why bother when I have a perfect candidate already
in my collection?
Full set of images here.
Comments welcome.
Dr. S.
| | | | | | | | | | | | | | | | | Full images of the final build are now
here, including a short video!
<http://www.tabletownonline.com/images/mlphase2/train001.jpg
Mighty Lizbet herself now sits on a split-level carriage, lowering her centre
of gravity and making the shape more what I originally intended. the carriage is
also longer.
The ammunition loading carriage follows the gun on the train. There are two
types of shell - armour-piercing, for bunker busting (yellow band) and high
explosive (red band).
There are two troop wagons, basic but functional designs.The rear platform
allows for weapon emplacement for defence.
Dr. S.
| | | | | | | | | | | | | | | | | Argh..somebody help me please, I cant stop adding new bits to my railway
cannon...
This is the support Gun Carriage for the Mighty Lizbet Rail Cannon. Featuring
two turreted twin-20mm multi-purpose cannon that are capable of engaging ground
and air targets, the carriage also contains the control centre for the support
weapons as well as the main interface for the Railway Cannon itself.
<>
<>
The carriages lock in place during transit (just by using the interference
between a plate and a tile)...
<
...but they can be unlocked to swivel. Alas, I can only get a limited traverse
at the moment without buggering up the whole thing...maybe something to work on.
Cool though eh?
<>
<>
<>
Full set of images here.
Dr. S.
| | | | | | | | | | | | | | | | | A bit of tinkering, and I now have full 180 degree movement on each gun. Have
also made a few other minor aesthetic changes so its wholly in keeping with the
rest of the train.
It has proper train doors now, as do the troop carriages:
Dr. S.
| | | | | | |